The Kramer BCLS-33 Cat 6A F/UTP LSZH Cable 1640ftby Kramer BCLS-33 Cat 6A F/UTP LSZH Cable 1640ftis a high-performance Cat 6A F/UTP cable for IT, LAN, and Ethernet installations. Its design exceeds Cat 6A specifications and provides a larger bandwidth than the basic standard cable (sweep frequency up to 650 MHz).

The cable is constructed with four pairs of 23-gauge solid bare-copper conductors. The low-smoke zero-halogen jacket emits limited smoke and no halogen when exposed to high sources of heat, protecting people and equipment from toxic and corrosive gas.

Acting as a shield, an overall metal-foil screen with a drain wire helps further reduce the potential for electromagnetic interference (EMI). Other features include an internal rip cord to prevent damage to the individual conductors when stripping off the jacket, a cross filler to reduce crosstalk, sequential markings every meter, and a fumigated plywood reel.

Bandwidth Exceeds Cat 6A Specifications    4 Pairs 23 AWG Solid Bare Copper    Low-Smoke/Zero-Halogen Jacket    Metal-Foil Screen with Drain Wire    Internal Rip Cord    Cross Filler    Sequential Markings    Fumigated Plywood Reel

• 4 pairs of 23 AWG solid bare-copper conductors
• Low-smoke zero-halogen jacket for safety
• Exceeds Cat 6A specifications for wider bandwidth
• Sweep frequency up to 650 MHz
• Overall metal-foil screen with drain wire
• Internal rip cord for additional protection 
• Cross filler for reduced crosstalk
• Sequential markings every meter
• Fumigated plywood reel
• Applications include structure cabling for horizontal and building backbone cable, IT, LAN and Ethernet installations, IEEE 802.3ab 1000BASE-T, 1000BASE-TX and legacy speeds, CDDI/ATM/Token Ring, and IEEE 802.3af (PoE) / IEEE 802.3at (PoE+)    

Related Questions and Answers

Q: 1. Will this fit CAD E100s?

A: Due to it's width, we wouldn't recommend this for the CAD E100s. A standard gooseneck pop filter would work better. Here's a suggestion B&H # AUPFNY6.

Q: 2. Will this fit an AKG 440?

A: The Auray OMPF-33 will fit side address microphones with diameters from 1.8 to 2.5 .

Q: 3. What is the length of the umbrella when folded?

A: The following unit broken down is 27inch.

Q: 4. What is the benefit of using the Diffuser cover over the reflector cover, or vice versa? Which gives you more, or softer light?

A: The Angler Umbrella Reflector Cover offers two great features which are. Turning Translucent Umbrella into Softbox Reduces Light Approx by 1 Stop for control

Q: 5. impactreversible

A: If you mean does it reverse? No. Not sure what the question is otherwise. maybe it was a typo. P

Q: 6. Will this work with the Rode NT USB Mini?

A: This would not fit around the microphone due to the stand. Something like this would fit better: https://www.bhphotovideo.com/c/product/1306486-REG/auray_pfny_6_pop_filter_with_gooseneck.html?sts=pi&pim=Y

Q: 7. will this work on a hyperx quadcast mic?

A: This will work for mics up to 65mm in diameter. The HyperX Quadcast microphone is 50mm in diameter, so the Auray OMPF-33 will work with it.

Q: 8. Can this umbrella be used with other/any moonlights?

A: The Profoto Deep Small Umbrella (33 , Silver) would be compatible with all light fixtures which use the standard 8mm umbrella shaft. As Elinchrom light fixtures require a 7mm umbrella shaft, this umbrella is not compatible with Elinchrom monolights.

Q: 9. What is the output compared to the hard Magnum reflector?

A: Profoto does not have a comparison for output between different umbrellas.Just that this umbrella because of the design and shape has more control and gives a sharper or harder edge of light.

Q: 10. What are the dimensions for the umbrella folded into the included carrying case?

A: The dimension of this umbrella folded down in its original case is 29.3 inches long x 5.5 inches wide.