Tiltall Bh-10 Ball Head Tripod

Product Code: eq181272
Availability: In Stock

$409.50 $552.83

Qty

20 reviews Write a review

Description
Reviews (20)

Capable of holding any equipment weighing up to 44.1 lb, the Tiltall BH-10 Ball Head Tripodfrom Tiltall BH-10 Ball Head Tripodis well-suited for use with professional DSLR and mirrorless cameras. It comes with a quick release plate for fast operation, which attaches to your gear via a standard 1/4"-20 screw and locks onto the clamp by turning a knob on the side.

With a height of 3.7" and weight of 13.4 oz, this tripod head offers full 360° panning and a notch on the base for 90° tilting in one direction. A single locking knob is used to adjust tension and position and features friction control for making precise changes to your composition. Two bubble levels are offered, a rectangular one on the side of the base plate and a bull's-eye model built into the clamp knob. Additionally, graduated markings on the base of the ball head allow you to view your panning angle as you adjust it for more critical work such as panoramas or video recording.

Load Capacity: 44.1 lb Height: 3.7" Weight: 13.4 oz Quick Release Plate on Screw-Knob Clamp 360° Pan and 90° Tilt Friction Control Two Bubble Levels Graduated Scale for Precise Panning 1/4"-20 Screw for Mounting Gear

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male
Camera Plate	Quick Release: Arca-Type
Head Type	Ball Head
Drag Control	Yes
Load Capacity	44.09 lb / 20 kg
Weight	13.4 oz / 380 g
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male
Camera Plate	Quick Release: Arca-Type
Head
Head Type	Ball Head
Base Mount	Flat Base with 3/8"-16 Female
Counter Balance	No
Pan & Tilt
Drag Control	Yes
Vertical Tilt	No
Lateral Tilt	No
General
Load Capacity	44.09 lb / 20 kg
Bubble Level	Yes
Weight	13.4 oz / 380 g
Packaging Info
Package Weight	1.035 lb
Box Dimensions (LxWxH)	6.05 x 4.75 x 4.1"

Ball head with a height of 3.7" and weight of 13.4 oz, comes with quick release plate that goes on screw-knob clamp
Capable of holding cameras and other equipment as heavy as 44.1 lb, attaches to gear via 1/4"-20 screw
Full 360° panning range and 90° tilting in one direction
Single locking knob for position adjustments, offering friction control for precise framing
Two bubble levels: on the side of the base plate and inside the clamp knob
Graduated scale at the base for measuring the panning angle

Related Questions and Answers

Q: 1. Anyone have a problem with the rubber texturing coming off?

A: We have not had any reports of the rubber coming off of this head.

Q: 2. What is the diameter of the base plate?

A: The Vanguard Alta BH-100 Ball Head has a base diameter of 2.3 inches.

Q: 3. Does the safety pin locks the peak design plate?

A: The Peak Design Dual Plate V2 can work with the safety pin on this Vanguard head.

Q: 4. I'm wanting to replace an older SBH-100 ball head that is on an Alta Pro 264AT tripod with the newer Arca-Swiss Alta BH-100 head but I wanted to know if I can attach the "three legged thing" (QR-11 LC) L bracket to it without any issues?

A: There should not be any issues. This head has an Arca-Type Compatible Clamp, the QR-11 LC L Bracket has an Arca-Type Compatible Plate. This head and that plate are compatible.

Q: 5. What is the diameter of the ball?

A: The ball of the Vanguard Alta BH-300 Ball Head (B&H# VAALTABH300) is approximately 2" in diameter.

Q: 6. Aside from the increased load capacity, how is this different from the BH-100?

A: The Vanguard Alta BH-300 is stronger, slightly larger in size/base diameter, as well as heavier than the Vanguard BH-100.

Q: 7. Is thee BH-30 made in the USA?

A: Yes, the Matthews BH-30 is made in the United States.

Q: 8. Is the center column removable?

A: No, the center column of the K&F Concept F Series Travel Tripod with BH-25C Arca-Type Ball Head is not removable.

Q: 9. What is the diameter of the base?

A: This head has a base diameter of 2.6 inches / 66mm.

Q: 10. Can the ball head accomodate Small rig L plate for Canon R6 ? https://www.bhphotovideo.com/c/product/1583498-REG/smallrig_2976_l_bracket_for_canon_eos.html

A: Yes the SmallRig L bracket will be compatible with the Vanguard Alta BH 300 ballhead.

Joseph	04/09/2024
[Yes] Needing an absolutely solid base for my Hasselblad 500cm, I found this very fine Tiltall BH-07 Ball Head mount for my new, Benro TMA47AXL Extra Long Series 4 Mach3 Aluminum Tripod. After many years of shooting with a very light weight, inadequate tripod with flat plate/head, I'm in heaven sighting in and adjusting my shot with this wonderful head! Thanks also to B&H tech support for confirming compatibility!! 5

Robert	03/09/2024
[Ball Head] What makes this tripod amazingly versatile is the ability to position the center pole horizontally and then angle it up and down as desired. The lever release makes this operation smooth and effective. I have another high quality tripod that can position the center pole horizontally but it can't change the angle up and down. I have to do that by adjusting the legs. A bit clumsy at times. This tripod does it using the release lever. Much easier to do. 5

Ryan	02/09/2024
[1x 1/4"-20 Male] So much versatility. It's robust and easy to use for the most part. It's not as portable as some other tripods but that's not a big deal for me 5

Chris	01/09/2024
[1.035 lb] My primary interests are in landscape and macro photography. This tripod gives me exactly what I need for both of these in a single package. In the few weeks I've had it, it's already proven to be very versatile and easy to use. The balance between stability and weight have worked out well for me. I've found the multi-angle center column to be extremely versatile and flexible. 5

Tom	06/08/2024
[Ball Head] Have had this for only a short period of time but really like it; feels solid and not flimsy. Holds camera/lens and extender very well, does not slip. Other functions etc work very well. 5

david	04/08/2024
[1.035 lb] I like this ball head because for it's size, it's the strongest and locks up the tightest of any other ball head I've owned (including: RRS, Kirk, SLIK, FLM, and Gitzo). 5

Kieth	03/08/2024
[Yes] I am new to photography, and my last Walmart tripod broke. I bought this and it has a learning curve for me as it is a ball instead of the pan style head. I like the ball better I think as it keeps your hands closer and there is less movement than I had with my cheap pan style one. But this is 10000% better overall. Great height and movement. Have already used it to take some good Spider-Web, Moon, and Stars pictures. Would defiantly recommend to someone. If you want to go hiking with it I suggest the Carbon Fiber one as I feel the weight when charring it around even though it is not heavy. 5

annie	02/08/2024
[1x 1/4"-20 Male] A very versatile tripod with a very smoothly moving center articulating column and very easy to use large buttons to change the leg angles. I had a problem with my tripod after 4 months and their customer service was 5 star. 5

Graham	28/07/2024
[1x 1/4"-20 Male] Perfect hood mount. If you need to use a larger format camera the ball can be removed and replaced with a levelling ball head. 5

Ron	27/07/2024
[Ball Head] My most versatile tripod to date. Probably won't go hiking deep into the woods to photograph a waterfall with it, but roadside landscape/waterfall/long exposure or macro shots is what I got it for. I am very please so far! The carrying bag it comes with is expcetional as well! 5