Tiltall Tripod Bh-20 Ball Head For Photography

Product Code: eq181273
Availability: In Stock

$472.50 $567.00

Qty

6 reviews Write a review

Description
Reviews (6)

Capable of holding any equipment weighing up to 55.1 lb, the Tiltall Tripod BH-20 Ball Head for Photographyfrom Tiltall Tripod BH-20 Ball Head for Photographyis well-suited for use with professional DSLR and mirrorless cameras. It comes with a quick release plate for fast operation, which attaches to your gear via a standard 1/4"-20 screw and locks onto the clamp by turning a knob on the side.

With a height of 3.9" and weight of 15.5 oz, this tripod head offers full 360° panning and a notch on the base for 90° tilting in one direction. A single locking knob is used to adjust tension and position and features friction control for making precise changes to your composition. Two bubble levels are offered, a rectangular one on the side of the base plate and a bull's-eye model built into the clamp knob. Additionally, graduated markings on the base of the ball head allow you to view your panning angle as you adjust it for more critical work such as panoramas or video recording.

Load Capacity: 55.1 lb Height: 3.9" Weight: 15.5 oz Quick Release Plate on Screw-Knob Clamp 360° Pan and 90° Tilt Friction Control Two Bubble Levels Graduated Scale for Precise Panning 1/4"-20 Screw for Mounting Gear

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male
Camera Plate	Quick Release: Arca-Type
Head Type	Ball Head
Drag Control	Yes
Load Capacity	55.12 lb / 25 kg
Weight	15.52 oz / 440 g
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male
Camera Plate	Quick Release: Arca-Type
Head
Head Type	Ball Head
Base Mount	Flat Base with 3/8"-16 Female
Counter Balance	No
Pan & Tilt
Drag Control	Yes
Vertical Tilt	No
Lateral Tilt	No
General
Load Capacity	55.12 lb / 25 kg
Bubble Level	Yes
Weight	15.52 oz / 440 g
Packaging Info
Package Weight	1.25 lb
Box Dimensions (LxWxH)	6 x 4.7 x 3.8"

Ball head with a height of 3.9" and weight of 15.5 oz, comes with quick release plate that goes on screw-knob clamp
Capable of holding cameras and other equipment as heavy as 55.1 lb, attaches to gear via 1/4"-20 screw
Full 360° panning range and 90° tilting in one direction
Single locking knob for position adjustments, offering friction control for precise framing
Two bubble levels: on the side of the base plate and inside the clamp knob
Graduated scale at the base for measuring the panning angle

Related Questions and Answers

Q: 1. Aside from the increased load capacity, how is this different from the BH-100?

A: The Vanguard Alta BH-300 is stronger, slightly larger in size/base diameter, as well as heavier than the Vanguard BH-100.

Q: 2. What is the diameter of the base plate?

A: The Vanguard Alta BH-100 Ball Head has a base diameter of 2.3 inches.

Q: 3. Can the ball head accomodate Small rig L plate for Canon R6 ? https://www.bhphotovideo.com/c/product/1583498-REG/smallrig_2976_l_bracket_for_canon_eos.html

A: Yes the SmallRig L bracket will be compatible with the Vanguard Alta BH 300 ballhead.

Q: 4. Will any standard Arca swiss plate fit this tripod?

A: Reported incompatibility of Arca-Swiss components usually centered around a lever activated clamp. Since this one has a knob clamp, you should have no issue.

Q: 5. What is the diameter of the base?

A: This head has a base diameter of 2.6 inches / 66mm.

Q: 6. Does the safety pin locks the peak design plate?

A: The Peak Design Dual Plate V2 can work with the safety pin on this Vanguard head.

Q: 7. Is the center column removable?

A: No, the center column of the K&F Concept F Series Travel Tripod with BH-25C Arca-Type Ball Head is not removable.

Q: 8. What is the diameter of the ball?

A: The ball of the Vanguard Alta BH-300 Ball Head (B&H# VAALTABH300) is approximately 2" in diameter.

Q: 9. Will this ball head fit on REDGED RTA 424 tripod legs?

A: Yes this head can fit a REDGED RTA 424 Tripod.

Q: 10. are other shoes available for this head? More specifically I need an extended shoe with 1 or ideally 2, 3/8 screws, not 1/4 20.

A: yes,you can get other plates that will fit the BH30,in my case i just replaced the hole top plate with RRS quick release system.this is a vary good ballhead fot the price.

Joseph	21/08/2024
[Yes] Needing an absolutely solid base for my Hasselblad 500cm, I found this very fine Tiltall BH-07 Ball Head mount for my new, Benro TMA47AXL Extra Long Series 4 Mach3 Aluminum Tripod. After many years of shooting with a very light weight, inadequate tripod with flat plate/head, I'm in heaven sighting in and adjusting my shot with this wonderful head! Thanks also to B&H tech support for confirming compatibility!! 5

Daryl	23/07/2024
[6 x 4.7 x 3.8"] I tested this product thoroughly and it is solid. It is easy to use, locks well, doesn't creep once locked with heavy weighty equipment in the unstable portrait orientation. This was rated very highly by a German Tester, he tested several parameters and is well worth checking this review for many ballheads. This ballhead is small, has multiple levels, well marked on the pan base for panoramas. 5

Peter	28/05/2024
[Yes] Fits atop my ancient Marchioni Tiltall with the new Gary Regester double-extension column perfectly, taking very little room.� Tight machining and smooth operation.� This thing is built to last.� With its slender profile and generous weight capacity, I can see this model renewing all manner of tripods. 5

david	14/04/2024
[Yes] I like this ball head because for it's size, it's the strongest and locks up the tightest of any other ball head I've owned (including: RRS, Kirk, SLIK, FLM, and Gitzo). 5

Johnny	05/04/2024
[6 x 4.7 x 3.8"] Haven't use it but a couple of time but locks well with a Sigma 300mm f2.8 lens mounted on a Pentax K-1. 5

Hiram	30/11/-0001
[1x 1/4"-20 Male] I use this for mounting my Panasonic UE150s onto mic stands, and it works really well. They have excellent form factor, and they can speak several languages. I recommend them. 5