The AJA HDP3 3G-SDI to DVI-D Audio Converterfrom AJA HDP3 3G-SDI to DVI-D Audio Converteris a compact converter with support for 3G-SDI input up to 1080p60 and 1920 x 1200, and a DVI-D output for devices such as LCD, DLP, and plasma monitors or projectors. The converter scales, deinterlaces, and automatically resizes 4:3 or 16:9 video input and outputs to a DVI-D display. The converter can input and output up to eight channels of embedded audio over DVI-D and the 3G-SDI loop output as well as split the audio output to the stereo 2RCA analog output.

Convert 3G-SDI to DVI-D and Analog Audio    Output Video to Monitor, Projector, DLP    Up to 1080p & 1920 x 1200 Resolution    24-Bit and 30-Bit Deep Color Support    Auto-Scaling to/from 4:3 and 16:9    2-Channel RCA Audio Output    HD-SDI Loop Output

• HD-SDI/SDI to DVI-D
• HDMI 1.3a support via DVI-D connector, including deep color 30-bit video (24-bit also supported), 2 or 8 channels of embedded audio
• Automatically adapts to popular LCD / DLP / Plasma monitors and projectors up to 1920 x 1200 and 1080p
• High-quality scaling engine for proper display of 4:3 or 16:9 content
• 1 to 1 scaling for appropriate monitor configurations
• 2-channel RCA analog audio output (user-assignable channels)
• HD-SDI/SDI looping output
• Setup via Windows/Mac using USB port and supplied USB cable (USB configuration software application supplied on CD)

The HDP3 is small enough to fit behind a monitor, in the back of a rack, or directly on a camera rig

Ships with a universal power supply unit that includes international plug connections for use around the world, and it plugs into the unit's locking power connector

Related Questions and Answers

Q: 1. Does this card integrate with Avid Media Composer 2020?

A: yes thwe AJA kona card will work with AVID media composer

Q: 2. I have 1 sdi camera that connects this capture card https://a href= http://www.bhphotovideo.com/c/product/766050-REG/Blackmagic_Design_BDLKULSASDI_UltraStudio_SDI.html target= _blank www.bhphotovideo.com/c/product/766050-REG/Blackmagic_Design_BDLKULSASDI_UltraStudio_SDI.html/aHow would I connect audio from my mixer board to this device and then into capture card ?

A: Connect your SDI camera to the input to the Mini Converter. Connect your audio console analog audio to the audio inputs to the Mini Converter. The output of the mini converter connects to the Ultra Studio

Q: 3. can this convert incoming H265 to H264 signal output?

A: The AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter can support an H.265 signal in and an H.264 signal out, though this would be a codec conversion that's dependent on the software being used. This converter would only do resolution and framerate conversion.

Q: 4. what happen if just only audio input without video input. Could audio input Embed to SDI output without video?

A: With no SDI Video input, an output will be generated but you will not have control over the resolution and rate.

Q: 5. Do I have embedded audio singal on the SDI-output of this converter?

A: This converter will de-embed audio from the SDI Input. The SDI Output will be the same as the SDI Input. No change to the signal. So if there is audio on the SDI input, there will be audio on the SDI output.

Q: 6. will it do 10-Bit?

A: Hi Nathaniel...Video processing is 10 bit.Audio processing is up to 24 bit 96Khz

Q: 7. Trying to compare to BM 12x12 router. Does Kumo have reclocking on all SDI inputs? How loud is the fan? The BM is unbearable loud

A: The SDI connections will re-clock. This product is designed to allow you to assign any of the 16 SDI inputs to any of the 16 outputs. Because of that you should expect it to make some level of noise from the fan cooling it down.

Q: 8. I see there are mini switches on this, what numbers to do you have on?

A: This all depends on your particular usage of the device. - Do you want to get analog or AES audio from it? Dipswitch #8 determines which one is output. - An SDI signal can carry up to 16 channels of audio - but this device can only output 4 for analog and 8 for AES at a time - so dipswitches #5 & 6 determine which group of audio channels is output.In my particular usage for this device - I want analog audio - channels 1-4 from the unit. So I leave all 8 dipswitches in the OFF position.

Q: 9. Can I use a second one of these to convert audio back to analog?

A: No. This device is not a cross converter; it only converts from analog to digital.

Q: 10. Does this also come with a full size bracket? Can this be used in a full size pc tower?

A: This does not come with any enclosure or expansion chassis. You can ether place it right in your PC tower or get an expansion chassis separately