Blackmagic Teranex Mini Ip Video 12G Converter

Blackmagic Teranex Mini Ip Video 12g Converter

Product Code: eq181293
Availability: In Stock

$1,635.00 $2,566.95

Qty

18 reviews Write a review

Description
Reviews (18)

Supporting up to 12G-SDI data rates, the Teranex Mini IP Video 12G from Blackmagic Design is a 12G-SDI/Ethernet encoder/decoder that supports TICO encoding for high-quaity video over Ethernet transmission. The compact size of the Teranex Mini makes it very useful for portable racks at live events or in broadcast trucks. One unit is required at each end—multiple units can be used on the same network—controlled by a Mac or Windows computer using the included Blackmagic Video Hub software.

The unit supports up to 1080p60 over a Gigabit Ethernet LAN with higher data rates supported by using an optional 10G optical Ethernet connector. The Mini IP Video 12G has a single 12G-SDI input and two 12G-SDI outputs in addition to the Gigabit Ethernet connector and a slot for an optional 10G SFP. An optional Smart Front Panel with a built-in LCD display provides local setup and control and replaces the standard panel with DIP switch setup that comes with the unit. Up to three units can be easily installed in an optional 1 RU 19" rack tray, and it features a built-in 90-240V power supply, and all you'll need is a standard IEC power cable, sold separately.

Advanced High-Data Rate Signal Converter TICO Encoder / Decoder Supports up to 4K DCI 4096x2160p Signals Two Independent 12G-SDI 10-Bit Outputs Gigabit Ethernet for up to 1080p60 Optional 10G Optical Ethernet Support Supports Optional LCD Smart Front Panel Intelligent Thermal Heat Dissipation Manage Numerous Units from a Mac or PC

Inputs / Outputs
Video Inputs	1x BNC (12G-SDI)
Video Outputs	2x BNC (12G-SDI)
Other I/O	1x RJ45 Input/Output
Expansion Slots	1x SFP Slot
Format Support
Input Video Format	SDI (10-Bit 4:4:4/4:2:2 RGB, YUV) DCI 4K at 23.98/24/25 fps UHD 4K 23.98/24/25/29.97/30/50/59.94/60 fps DCI 2K 23.98/24/25 fps DCI 2KPsF 23.98/24/25 fps 1080p 23.98/24/25/29.97/30/50/59.94/60 fps 1080PsF 23.98/24 fps 1080i 50/59.94/60 fps 720p 50/59.94/60 fps
Output Video Format	SDI (10-Bit 4:4:4/4:2:2 YUV) DCI 4K at 23.98/24/25 fps UHD 4K 23.98/24/25/29.97/30/50/59.94/60 fps DCI 2K 23.98/24/25 fps DCI 2KPsF 23.98/24/25 fps 1080p 23.98/24/25/29.97/30/50/59.94/60 fps 1080PsF 23.98/24 fps 1080i 50/59.94/60 fps 720p 50/59.94/60 fps
Embedded Audio	SDI/LAN (RJ45)
Standards
Video Standard Compliance	SMPTE 259M/292M/296M/310M/425M ITU -R BT.601/BT.656
IP Streaming
Video IP Encoding	TICO: 4096 x 2160
Video IP Decoding	TICO: 4096 x 2160
Hardware
Media Card Reader	1x SD (Unspecified Type)
OS Compatibility	macOS Windows
Power
Power I/O	1x RJ45 (48 VDC ) Input 1x IEC C14 Input
Power Consumption	Device: 90 to 240 VAC (16 W)
Environmental
Operating Temperature	32 to 104°F / 0 to 40°C
Storage Temperature	-20 to 140°F / -28 to 60°C
Operating Humidity	0 to 90%
General
Dimensions	6.69 x 5.51 x 1.75" / 16.99 x 14 x 4.45 cm
Weight	1.28 lb / 581 g
Packaging Info
Package Weight	1.9 lb
Box Dimensions (LxWxH)	9 x 7.8 x 2.5"

Requires a minimum of two units—one for encoding the signal and one for decoding the signal.

TICO encoding is a visually lossless compression designed to let you distribute video across an IP network.

The unit supports signals up to 1080p60 over a standard Ethernet connection. For support of signals up to 12-G SDI (4K DCI or 4K UHDF), an optional 10G fiber optic Ethernet LC connector is required.

Blackmagic Videohub Software can be used on Windows or Mac OS computers to turn them into a router server that can manage the connections between multiple units so you can build a large custom sized router on your network.

Supports AC voltage using an optional IEC cable (Blackmagic units do not ship with a power cable) or you can power it via PoE+ with a compatible router.

Setup is done via built-in DIP switches, Blackmagic Teranex setup software, or an optional Teranex Mini Smart Panel with LCD screen.

You can control your Mini 12G-IP via the optional Teranex Mini Smart Panel with LCD screen or Blackmagic Video Hub software.

Embedded audio is supported—there are no separate audio inputs/outputs.

Blackmagic Teranex setup and Video Hub software is included on the SD card that ships with your unit.

Related Questions and Answers

Q: 1. When using the converter to output analog, will the analog audio output to the XLR connections and the RCA connections at the same time? Thank you!

A: So that we may best assist you, please email us at provideo@bhphoto.com.

Q: 2. BMD Teranex Mini HDMI to SDI 12G Converter - Can this device Embed audio only without accompanying video signal?

A: yes

Q: 3. Timecode output.Is it LTC?

A: You may chose to extract timecode from the SDI input instead of audio out the XLR. Yes it is LTC.

Q: 4. Does this model have audio delay to adjust for lip sync?

A: No there are no delay adjustments.

Q: 5. What is the bit depth of the S-video to SDI A/D conversion?

A: 10-bit.

Q: 6. Can you input xlr audio into this with no video signal connection, then take the sdi output to control room? OR does it have to have a video signal?

A: You will need to feed an SDI video signal in order to embed audio.

Q: 7. Will it work as a second monitor on a mac?

A: You can connect the extended or mirrored desktop into this converter via HDMI and connect an SDI monitor to the output if you wish.

Q: 8. What is the latency of this unit?

A: Teranex Mini SDI to HDMI 12G currently has a one frame delay when Instant Lock is turned OFF but we are looking into doing an update in the future which will result in a few lines of delay only. If the Instant Lock feature is turned ON, the delay could be up to 2 frames.

Q: 9. Does it support 3D luts?

A: Yes

Q: 10. How does it connect with the Apple Pro Display XDR? Thank you.

A: It won't work with it. It takes the input of 4 12G-SDI signals and convert to 4 HDMI 2.0 signals.

Rusty	29/08/2024
[1.9 lb] Works great! 5

Ben	25/08/2024
[0 to 90%] controllable levels and details over the network. I found this unit doesn't care if it's connected to an HDMI end point or DVI. Works every time. 5

Trevor	12/08/2024
[0 to 90%] Easy to install. Works well. 5

MOTU User	07/08/2024
[SDI/LAN (RJ45)] works as described, I had to get four older PTZ cameras (Sony EVI-D100) to work with a Atem 1 m/e and this did the trick to get it functional. I had to use one teranek converter per camera 5

Ryan	07/08/2024
[SDI/LAN (RJ45)] Does what is advertised. Does 4K which is why it costs more. 5

Ben	06/08/2024
[0 to 90%] This unit over the DAC-70 is a toss up but you can't power the DAC-70 with PoE but you have an HDMI loop out with the DAC-70, but it doenst have XLR/ AES outs. I'd give the Teranex Mini 10 stars if it had a HDMI loop out. 5

Walt	26/07/2024
[0 to 90%] We got these as we were in a pinch. Set multiple to remote stages for our biggest festival. No it does not come with sfp's, but that allows you to decide what signal you need 3G/ 6G/ 12G and spend accordingly. Locking ps is a appreciated feature. Have performed flawlessly having traveled the country to various music events. These units are perfect for FOH positions as you can send video to DLX/ Servers and get a server feed or spy cam back. 5

Eric	14/07/2024
[9 x 7.8 x 2.5"] The device is improved in a number of ways over the previous generation. It's smaller, feels stronger, and has a threaded locking power supply port. It is a little awkward that you have to add your own SFP module, which is not exactly immediately clear, but it does keep the cost quite low for anyone needing only 1080 resolution. The 12G stuff makes this product more expensive than its 4k predecessor, so that's a drawback. But, having bi-directional function on these is a lifesaver in all sorts of situations - not the least of which is sending a confidence monitor signal to any given camera position, which really helps in engineering live events. 5