You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Easyrig Vario 5 Strong Cinema 3 Vest 5" Arm

Easyrig Vario 5 Strong Cinema 3 Vest 5" Arm
  • Product Code: eq181297
  • Availability: In Stock

$14,949.00 $22,423.50

The Easyrig Vario 5 Strong Cinema 3 Vest 5" Armis a body-worn support system that is adjustable to support camera rigs weighing 22 to 55 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the Cinema 3 double shoulder vest, a Vario 5 Strong support bar, and a 5" extended support arm. A carrying bag is also included for convenient storage and transport of the Easyrig system.

22 to 55 lb Load Capacity    Reduces Strain on Arms, Neck & Shoulders    Adjustable Line Tension    Cinema 3 Vest    5" Extended Arm    Carrying Case

Parameters
Stabilizer TypeVest System
Load Capacity22 to 55 lb / 10 to 24.9 kg
Height38 to 45" / 97 to 114 cm
24" / 60 cm (Folded)
Weight13 lb / 5.9 kg
CounterweightsNo
Belt Size31 to 51" / 80 to 130 cm
Suspension Line Length35" / 88 cm
Operating ConditionsNot Specified by Manufacturer
Storage ConditionsNot Specified by Manufacturer
Packaging Info
Package Weight23 lb
Box Dimensions (LxWxH)36 x 20 x 13"

  • 22 to 55 lb load capacity
  • Adjustable line tension for different cameras and configurations
  • Lockable camera hook
  • Vest and waist belt are made of breathable material
  • Made in Sweden

Related Questions and Answers

Q: 1. The part of the vest that the arm attaches to, appears to be on the right side of the vest. Can that part be flipped to the left side of the vest so the arm extends to the left of the vest? Thanks ?

A: Yes, the bridge plate and socket block of the Steadicam Steadimate-RS Aero 15 Arm and Aero Vest Kit can be flipped to operate from the left side.

Q: 2. Does the CRANE 3S handle fit on the stud mount of the arm?

A: No it does not. at this time the only solution for the Crane 3S is the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for Select Handheld Gimbals (B&H # DITHANOSPC3 MFR # THANOS-PROC3)

Q: 3. Is the 15 lb Payload for the camera or for the camera plus sled / counterweights? If it's for the whole setup, what is the net max camera weight that can be used on this arm / vest combo?

A: The Steadicam Steadimate-RS Aero 15 will support up to 15lb camera payloads. 15 pounds would be the max weight supported.

Q: 4. Would this work with a Dji rs3 pro holding a sony a7s3 and a 24-70 lens?

A: Yes, the Flycam Galaxy Arm and Vest Stabilizer would work with the DJI RS 3 Pro Gimbal Stabilizer holding a Sony a7S III and a 24-70mm lens using the Flycam Arm and Vest Gimbal Adapter for Select Gimbal Stabilizers, B&H # FLCMGA, to mount the gimbal.

Q: 5. Will this work with a Ronin S?

A: The Flycam Galaxy Arm and Vest Stabilizer is meant to be used with Flycam Camera Stabilizers. If you wish to use a steadicam with the Ronin S, you will want to look at: Steadicam Steadimate-S Aero 15 Arm & Aero Vest Kit https://www.bhphotovideo.com/c/product/1493892-REG/steadicam_sdms_a15vk_steadimate_system_with_a_15.html/accessories?sts=pi-ps&pim=Y

Q: 6. Is it possible to mount a view screen onto this rig? I have a canon r5 c and the little built in monitor is... small!

A: The Steadicam Steadimate-RS Aero 15 Arm and Aero Vest Kit is designed to work with the cameras LCD display, and does not offer a monitor mount. If you are working with the DJI RS3 Pro you could consider the wireless image transmitter in the Combo kit. That would allow you to send video from the camera as well as control to a small phone at could be clamped to part of the column of the Steadimate RS. CAMVATE Super Clamp & Arm with Dual 1/4"-20 Knob Ball Heads & T-Handle BH #CAC2096 Phone holder: Ulanzi ST-27 Metal Smartphone Tripod Mount BH #ULST27

Q: 7. Can the arm be switched to the other/left side?

A: No, there are no "sides," with the Steadicam Steadimate-RS Aero 15 Arm and Aero Vest Kit. The column sits at your center of gravity, wherever you need it to be.

Q: 8. Dose this work with left handed people

A: Yes, this will work well with people who are either right or left handed.

Q: 9. Does this work with the Zhiyun Crane gimbal?

A: Unfortunately no.

Q: 10. Will a Glidecam XR-PRO fit onto the pin of this unit?

A: Flycam lists support for the Glidecam 4000 with this arm and vest kit. While not specifically listed, if it works with the Glidecam 4000 we believe it should work with the XR-Pro as well.

29/09/2024

[36 x 20 x 13"] Unless you're renting in LA or NYC, it's nearly impossible to find a Vario 5 with a small operator vest. I'm 5'6, medium build (34 waist), and still need to tightly strap up on this rig. That tells me it'll fit someone taller and bigger than me. This rig is perfect for larger/heavier camera rigs and a Movi Pro. Fitted correctly, you don't feel any of the weight and I can see it working well with female operators as well.

One thing Easyrig doesn't really make clear and immensely valuable to me is:

The rig can quickly be raised and lowered about 5-6 inches. That might not seem like a lot but I'm short at 5'6 and the increased arm height allows me to raise the camera/Movi to film taller people without having to shoot up at them. It's just 4 screws that can be quickly adjusted within 2 minutes.

Finding a proper hard case to fly with this rig is not easy/cheap. BUT the vest can be easily separated from the arm in order to make the entire rig smaller and portable. Just takes adjusting the same 4 screws. Also helpful if you want to throw on a standard/larger vest for other operators.


The Serene Arm is amazing. Paired with a Movi/Ronin, proper handling, and rolling your steps, you can get some amazingly smooth footage. Remember to adjust the tension of your Serene Arm so it's parallel to the ground. Also remember to loosen the Serene Arm while traveling so you can safely bend it and make your rig smaller for packing.

5
11/09/2024

[Vest System] Extremely well made

5
05/09/2024

[36 x 20 x 13"] After years of renting Easy Rigs, dealing w/ the uneasy feeling knowing that other people probably sweat in them as much as I do and not knowing how good the rental houses clean these things, I finally got around to investing in one of these. Perfect for low mode where it can hold the camera weight chest height or lower, or static shoulder shots to give the shoulder a break. I've used this countless times over the years and finally got one. Should have done it sooner. Now I gotta save up for the Stabil arm

5
01/09/2024

[Vest System] I don't know how I ever left home without it. My new favorite piece of gear.

5
25/08/2024

[Vest System] Fantastic, I was mot a fan of Easy Rigs till I met the Vario 5

5
09/08/2024

[23 lb] Unless you're doing gimbal work, this is the best EasyRig for most setups.


The Vario gives the user the ability to adjust tension for a wide range of camera sizes and weights. The gimbal vest is great for waist support, much preferred over the original vest in my opinion. The 5 arm is the perfect size to get the camera off your shoulder but not be obtrusive in your environment.


Only wish I bought this sooner.

5
05/08/2024

[36 x 20 x 13"] This is great for a cinema style camera build. I fly a Arri Amira with zoom lenses, FIZ and teradek, so something in the 25lb range. This system allows for me to go hand held all day with minimal effort. I'm a large guy, 220lbs and 6' tall, and the cinema 3 vest fits me just fine with plenty of room for larger guys. These things are built like tanks, you can zip tie the bag shut and check it on airlines no problem.

Easyrigs are basically career extenders that save your back.

5
19/07/2024

[36 x 20 x 13"] Good Lord I waited too long to buy this. It's a hefty purchase (for me), but I've been spending too much money renting this same Easyrig since this particular nonsense came out.

The first week I had it I was strapped to an Arri Amira and some cinema zoom lenses that would've otherwise not been possible for me to operate handheld for as long as we were shooting. Had zero issues adjusting back to my much lighter RED DSMC2 and prime lens package.

I went with the Vario 5 because I knew I'd be using this Easyrig with multiple camera packages and weights. The 5 Extended Arm option was great for me because it allows me to reposition for different camera builds, center of gravities, and easily switch between shooting a balanced shoulder mount or from the hip. I chose the Cinema 3 Vest over the Gimbalrig because I like the smaller profile and it fits me better. I'm about 5'8, 160lbs, and I'm a 30-31 waist size.

5
22/04/2024

[23 lb] I rented and used different version of the Easy Rig and I Think this has to be one of the better builds. It allows me to go all day handheld without the stress on my back or arms. I've done gigs all handheld without a rig and now with a rig. I have to say that I will never go back to without a rig. This support system is putting years back onto my career. It's pricey, but then what not expensive in our business. Solid build, sturdy, and well crafted. There are other rigs that are out there that less expensive. I know. I've used them. They pale in comparison to this one. So, do yourself a favor and buy once and don't settle for a cheap imitation.

5
03/04/2024

[Vest System] Have used now on four shoots, two all-day hand held, two Movi. At 45, I have back pain on almost any shoot where I have to go handheld for over 15 minutes with my large camera package. I had tried other rigs for the Movi, but never fully evading the 'end of the day discomfort' that was sure to show up. This package changed all of that. Of all the gear I've bought over the years, this has to be my best purchase.

The impact was immediate... walked away from two 14 hour days with zero pain or stiffness. Next shoot, Stabil arm worked so well with my Movi walk-and-talk, again.. no back pain.

The quality and build of this rig is top notch. Nothing overlooked, no expense spared with build quality. And to top it off... takes seconds to 'rig up' with the help of the easy lock waist belt. If I was hot, I'd easily take it off between setups. I could rig-up as late as talent walking to set which is something I could never do before with the movi and other setups.

Bottom line, this rig is an investment in your future as a DP if you suffer from any kind of back pain. Wish I had purchased 10 years ago.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Easyrig Vario 5 Strong Cinema 3 Vest Standard Arm

$14,436.00 $20,932.20

Easyrig Vario 5 Strong Cinema Vest Quick Release

$14,949.00 $22,423.50

Easyrig Vario 5 Strong Extended Arm Gimbal Vest

$15,435.00 $23,306.85

Easyrig Vario 5 Strong Gimbal Vest Extended Arm

$14,814.00 $18,369.36

Easyrig Vario 5 Strong Cinema 3.0 Vest With Top Bar

$14,436.00 $17,756.28

Easyrig Vario 5 Strong Gimbal Rig Vest Standard Arm

$14,949.00 $23,768.91

Easyrig Vario 5 Strong With Stabil G3 & Gimbal Vest

$20,790.00 $26,611.20

Easyrig Vario 5 Extended Arm Gimbal Vest

$14,949.00 $18,237.78

Easyrig Vario 5 Cinema Flex Vest With Top Bar

$14,436.00 $17,756.28

Easyrig Vario 5 Cinema Flex Vest With 9" Top Bar

$14,436.00 $22,087.08

Products You May Like

Haida V-pro Irnd Filter 4x5.65" 1-stop

$717.00 $982.29

Pro Co Sound Roadmaster 12 Channel Snake 100'

$2,470.50 $3,038.72

Tiffen Full Spectrum Irnd Filter 6.6x6.6 10-stop

$1,845.00 $2,952.00

Vixen Optics A80mf Telescope Ota Apz Mount

$4,091.97 $6,137.95