Ubiquiti Airfiber Af-4X 4.9 Ghz Backhaul Radio

Ubiquiti Airfiber Af-4x 4.9 Ghz Backhaul Radio

Product Code: eq181317
Availability: In Stock

$1,197.00 $1,627.92

Qty

17 reviews Write a review

Description
Reviews (17)

The Ubiquiti airFiber AF-4X 4.9 GHz Backhaul Radiofrom Ubiquiti airFiber AF-4X 4.9 GHz Backhaul Radiois designed for long-range, Point-to-Point (PtP) backhaul links. It features a high TDD throughput and Hybrid Division Duplexing (HDD) technology that helps the device achieve low latency. The airFiber AF-4X also allows users to customize backhaul links or upgrade existing PtP links.

The airFiber AF-4X operates using the 4.9 GHz frequency band and features a range of 656,168' / 200,000m. Included with this device is a GPS antenna mount, an external GPS antenna, a metal strap, two cable ties, a 24V/1A airFiber PoE adapter with a mounting bracket, and a power cord.

Range: up to 124 mi (200 km) Up to 500+ Mb/s Real Throughput Full Band Certification including DFS Operates using the 4.9 GHz Band Hybrid Division Duplexing (HDD) Low Latency Enhanced Spectral Efficiency Operation in Unlicensed Bands Co-Location GPS Sync & Clean Power Output

Specifications
RF Connectors	2 x RP-SMA Weatherproof (CH0, CH1) 1 x SMA Weatherproof (GPS)
GPS Antenna	External, Magnetic Base
Power Supply	24 V, 1 A PoE Gigabit Adapter (included)
Power Method	Passive Power over Ethernet
Mounting	airFiber X Mount (Rocket Mount compatible) GPS Pole Mount (included)
Certifications	CE, FCC, IC
Networking Interfaces
Data Port	1 x 10/100/1000 Ethernet Port
Management Port	1 x 10/100 Ethernet Port
System
Processor	INVICTUS IC
Maximum Throughput	500+ Mbps
Maximum Range	656,168' / 200,000 m
Encryption	128-bit AES
Operating System	airOS F
Wireless Modes	Master/Slave
Radio Frequencies
Operating Frequency	FCC: 4940 - 4990 MHz IC: 4940 - 4990 MHz ETSI: 4700 - 4990 MHz Other Regions: 4700 - 4990 MHz
Power	Max. Conducted TX Power: 29 dBm (Dependent on regulatory region)
Frequency Accuracy	± 2.5 ppm without GPS synchronization ± 0.2 ppm with GPS synchronization
Channel Bandwidth	10/20/30/40/50 MHz selectable Programmable uplink and downlink duty cycles
Environmental
Operating Temperature	-40 to 131°F / -40 to 55°C
Dimensions & Weight
Dimensions	8.82 x 3.32 x 1.89" / 224.03 x 84.33 x 48.01 mm
Weight	0.77 lb / 0.35 kg
Packaging Info
Package Weight	2.55 lb
Box Dimensions (LxWxH)	10.4 x 4.4 x 4.3"

Ubiquiti's INVICTUS silicon and radio architecture are designed specifically for long-distance, outdoor wireless applications. Their INVICTUS core communications processing engine surpasses virtually all of the limitations inherent to generic Wi-Fi chips to help provide superior performance, long-range capability, DFS flexibility, and power output.

Deploy the 4.9 GHz model that meets your specific spectrum requirements, anywhere around the world. The airFiber AF-4X features multiple channel width options to suit your deployment needs.

Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations virtually anywhere within the radio band to avoid local interference, and the channel centers are selectable in 1 MHz increments. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements

The airFiber AF-4X is designed to provide the highest TDD throughput and lowest latency available using proprietary Hybrid Division Duplexing (HDD) technology.

With tower space at a premium, the importance of being able to co-locate equipment is becoming an essential attribute for modern wireless networks. The airFiber AF-4X is engineered to permit multiple radios to operate side by side, allowing maximum spectral efficiency.

Precise GPS frame synchronization enables co-located airFiber AF-4X radios to transmit and receive data without interfering with each other, enabling better frequency reuse and increased network stability.

Using advanced digital signal processing, the innovative airFiber AF-4X radio design has an ultra-clean transmitter output, reducing broadband noise, facilitating co-location, and enabling higher-order modulations like 256QAM for greater throughput.

Related Questions and Answers

Q: 1. Is this compatible with Ranger?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) (B&H# TE110888V) is compatible with the Bolt 4K 4.9-7.3 GHz, and its antennas are tuned to those frequencies. The Ranger series uses a slightly different frequency range and thus would not be compatible.

Q: 2. This is working for Bolt 6 LT as well?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (Gold Mount) is compatible with the Teradek Bolt 6 LT HDMI 750 Wireless Receiver, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver (Gold Mount), the Teradek Bolt 6 LT 1500 3G-SDI/HDMI Wireless Receiver (Gold Mount), and the Teradek Bolt 6 LT MAX 3G-SDI/HDMI Wireless Receiver.

Q: 3. Is the battery mount to power the array or to power the receiver you bring to the dance?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz comes with either V-Mount or Gold Mount battery plates attached.

Q: 4. Js this worldwide version?

A: This is USA version.

Q: 5. Will this help when experiencing interference from concrete and steel walls?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz can be used to allow for much greater distance or amplify the RF signal when encountering difficult wall types.

Q: 6. Is this a USB-C or standard USB connection?

A: The Ubiquiti Networks Instant 802.3af to USB Adapter BH #UBINS3AFUSB uses a USB Type-A port.

Q: 7. Do I need 2 of these to make them work properly? or just with one sending the signal and another one cheaper receiving it?

A: Yes, 2 are required.

Q: 8. Is this compatible with the Teradek Bolt 4k 750?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (Gold Mount) is compatible with Bolt 6 / Bolt 4K systems.

Q: 9. Is the there a floor standing mounting pole for this?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) mounts easily to any stand with a junior pin.

Q: 10. This device works for me when connected to a POE switch, but does NOT work when connected to a stand-alone Ubiquiti POE injector. Is there a way to make it work with the injector?

A: The Ubiquiti Networks Instant 802.3af to USB Adapter supports the Max. Power Input / Output 48V, 0.26A 5V, 2A Check the specs of the PoE injector.

James	27/09/2024
[2.55 lb] Works great special for long range 5

David	27/09/2024
[INVICTUS IC] Purchased these Ubiquiti Antennas to get Internet into my shop from the house. They are working great and I'm happy to finally have internet in the shop! 5

Jamie	21/09/2024
[128-bit AES] Short and sweet: pros: -Management radio (really easy to set up) -2 ports (It will pass passive poe or 802.3af. AWESOME!) -Airmax 8 is solid Cons: - No mount? Really? How are you supposed to aim them at all with just a zip tie? The nanostation mount doesnt fit these. I don't believe these can act as an AP to say something like your phone. I'll update this if I try but pretty sure Airmax stuff only works together and cant be turned off on this model. Other comments: Ubiquiti's own Nanoswitch needs 802.3at so I could get another couple ports and not start mixing in odd equipment. But thats just something I wish I could use with this. 5

Michael	15/09/2024
[2.55 lb] The NanoStation AC loco was super easy to install and was exactly what I needed. B&H has the best service and shipping! 5

Jose	03/09/2024
[2.55 lb] We have been using Ubiquity products for more than 5 years, we are very satisfied with this product, we highly recommend this units as they are workhorses for the type of surveillance wireless networks that we sell & service. 5

David	19/08/2024
[2.55 lb] Needed to set up a point to point radio link as Cat 5 distance was too long. Never implemented a point to point radio link before. Very much enjoyed the learning process, watched videos on YouTube. Set up was easy, one big advantage of the Nanostation AC is PoE passthrough to the secondary port, however wasted a few hours wondering why the remote camera was not working - Ubiquiti provide a 24V PoE power supply with the unit, the camera requires 48V PoE. The Nanostation AC works with either 24v or 48V PoE. I purchased a 48V PoE installed it and thereafter everything worked well. Very pleased with the product. 5

Bob	08/08/2024
[CE, FCC, IC] I have been testing several ways to improve my network speeds to a building about 300 feet away (Tried network router bridges, extenders and wireless AP uplink from Ubiquiti) The Wireless Uplink method from Ubiquiti was not bad but soon as I installed Nanostations up high, I began receiving full speeds close to the AP I connected to the Nano Station and about 80% of the speeds in nearby areas further which is MAJOR improvement from previous ways of bridging the network. Easy to setup, recommend getting the PoE surge protectors as well for these in areas that experience thunderstorms. Overall, I think I solved the problem for stable and reliable speeds without the option of getting a wired connecting to the building. Highly recommend, just ensure during installation that you test to ensure the locations are optimal for the link before permanently installing it. 5

Lance	01/08/2024
[2.55 lb] Upgraded from the M5 loco, they were overheating in our climate. This unit is faster, easier to set up, and doesn't overhead. Plan on adding cameras to the second port. 5