The CARBONZX Carbon Fiber Gimbal Head with Accessories from Zenelli is a lightweight head made from 100% completely hollow carbon fiber. It includes a Save Lenses Lever, and a Quick-Release Lever. Hard-anodized aluminum and stainless steel hardware help ensure high resistance to wear and tear, and corrosion.

The gimbal has a full 360° range of motion for both the pan and tilt, and separate locks with tension control for each. The clamp is compatible with most Arca-type dovetail plates, and is opened and closed via a thumb screw. Grooves in the clamp allow for use of plates with safety stop screws. The base of the clamp can be adjusted 4.8" up and down to balance and adjust the nodal point.

The Quick-Release Lever allows you to quickly open and close the gimbal head's Arca-type clamp. The width of the lever can be adjusted and locked in place for different width plates, and a safety lock prevents the clamp from accidentally opening and releasing the plate.

The Save Lenses Lever is mounted onto the vertical arm of the clamp and when activated, prevents the clamp from tilting forward, which might smash the lens into the tripod. This is especially useful when changing camera bodies. A padded shock absorber on the lever protects the carbon fiber from being damaged.

Height: 9.25"    Weight: 2 lb    Arca-Type Compatible    Tension Control    360° Pan and Tilt Ranges    Anodized Aluminum and Stainless Steel    Adjustable Clamp Height    Quick-Release Lever    Save Lenses Lever    Bubble Level

Ratcheting pan lock

2mm thick hollow carbon fiber body

Bubble level

Related Questions and Answers

Q: 1. is this gimbal compatible with the Sirui W-2204 Waterproof Carbon Fiber Tripod?

A: Yes, the Sirui PH-30 Carbon Fiber Gimbal Head will be compatible with the Sirui W-2204 Waterproof Carbon Fiber Tripod.

Q: 2. Will a Wimberly or a Really Right Stuff quick release stage fit on this Gimbal?

A: Some owners the older Zenelli model have been able to fit a RRS cradle but not on the current model. I just received my Zenelli ZX yesterday and have confirmed it does NOT fit properly. The dovetail of the vertical arm of the Zenelli is slightly too narrow for the RRS cradle and thus the knob cannot be tightened enough to make up for the extra play.

Q: 3. Hi, I'm interested in this Zenelli . Can you get the Zenelli Acra Swiss quick release plate with the stops and bubble level built into the plate. And do you have a Zenelli Brochure showing accessories that you can send me ? FJD Sporting Collectables, Frank J. Dattalo Jr., 400 Sharon Drive, Rochester, NY 14626

A: The head does not really have any other additional accessories but what is listed and that is part of the head. And the only item it does not come with is the quick release plate. The plate is Arca-Swiss style and there are many plates available and it as to the correct one it depends on the lens you will be using on the head.

Q: 4. Is it compatible with the Sony 400mm f2.8?

A: Yes, this is compatible will large super-telephoto primes like the 400mm f/2.8. :)

Q: 5. Can I use this to Nikon z7ii without using the lens collar?

A: Yes, you can connect the release plate provided with Oben GH-30C Carbon Fiber Gimbal Head to your Nikon Z7 II mirrorless camera and balance your equipment.

Q: 6. do i need the Oben QR-53 for a Sigma 150 to 600 lens?

A: While not a requirement, a longer quick-release plate such as the QR53 would help make it easier to balance on the Oben GH-30C gimbal head.

Q: 7. how strong is the metal to CF bond in this foot? Hate for it to separate carrying 12 founds and $20+K of equipment by the CF foo

A: The Zenelli Carbon Fiber Lens Foot Plate for Nikon Z is extremely sturdy and the metal to CF bond in this foot is inseparable so you can easily carry 12 lb. and $20k worth of equipment by the CF foot.

Q: 8. What is the vertical range of this gimble?

A: Dear Sir Thanks for your message. You can adjust the vertical balance for 90 mm. At your disposal Zenelli Team

Q: 9. Is the suggest accessory Oben QR-53 Long Lens Quick Release Plate (5.3") really necessary? It comes with an arca swiss fitting.

A: The answer would depend on which lens you will be using on the camera. If you are using a telephoto lens that has a tripod collar with a short base (such as a 70-200mm lens, a 100-400mm lens or a 150mm/180mm macro lens), the If you are using a large telephoto lens that has a tripod collar with a longer base, or you need a longer plate to give you more room to adjust the camera/lens' center of balance on the gimbal head, then the longer Oben QR-53 Long Lens Quick Release Plate (5.3") may be better suited for your usage needs.

Q: 10. Where is it made?

A: The Oben GH-30C Carbon Fiber Gimbal Head is made in China.