Psc 5-Pin Lemo To 1/4" Jack Time Code Cable 2'

Psc 5-pin Lemo To 1/4" Jack Time Code Cable 2'

Product Code: eq18549
Availability: In Stock

$222.75 $309.62

Qty

13 reviews Write a review

Description
Reviews (13)

The PSC 5-Pin Lemo to 1/4" Jack Time Code Cable 2'byPSC 5-Pin Lemo to 1/4" Jack Time Code Cable 2'is for connecting to a clocking device. It can be used to sync time code in various environments for applications such as, audio, video, film, networking and more.

For Syncing to Clocking Devices Suitable for Video, Film, Audio 5-Pin Lemo 1/4" Jack

Parameters
Connector 1	5-pin Lemo
Connector 2	1/4" (6.3 mm) phone jack
Length	2' (61 cm)
Weight	Not listed by manufacturer
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	6 x 3.5 x 1"

Related Questions and Answers

Q: 1. Can I use this on Mini LF to teardek Bolt TX?

A: Yes, the Tilta 2-Pin LEMO-Type to 3-Pin Fischer-Type Cable can be used with the 24-volt 3-pin Fischer output on the ARRI ALEXA Mini LF and Lens Mount Set (LPL) into the 2-pin power input on the Teradek Bolt 4K XT Transmitter.

Q: 2. Can this work with the red Komodo x 5 pin input?

A: No, not for timecode. The RED DIGITAL CINEMA KOMODO-X 6K Digital Cinema Camera uses a 9-pin LEMO connector for timecode. The Tentacle Sync C21 Tentacle to RED KOMODO Adapter Cable (B&H # TEC21) would be the cable to use for timecode with the RED Komodo-X. The camera's 5-pin LEMO connector is for audio input/output.

Q: 3. Has anyone used this for AUdio? I have a 5pin lemo audio out on my camera and would like to connect this to my stereo mini jack

A: This cable, as stated, is designed for Timecode. HOWEVER, if the connections inside cable and inside your camera are wired the same, it may work.Its impossible to tell without knowing the camera wiring of its connector. I would contact your camera manufacturer.

Q: 4. can you power the new SMALLHD INDIE 7 monitor with this cable?

A: No you can not. You should use this to power the Indie 7 Monitor instead. SmallHD D-Tap to L-Series Dummy Battery Cable (32") BH #SMDTSLFB • MFR #PWR-ADP-SONYL-DTAP

Q: 5. Is this male to male?

A: Yes, this is a Tilta 2-Pin to 2-Pin LEMO Cable (23") male to male.

Q: 6. Product description does not indicate if the 5 Pin Lemo is male or female. I would expect that it is Male?

A: Yes it is a male connector.

Q: 7. can this be used as a R/S trigger cable for RED V-Raptor with a 3-pin lemo female breakout box?

A: No, the Tentacle Sync 3-Pin LEMO to 3.5mm Mini Jack Microphone Adapter cannot be used as an R/S trigger cable for the RED DIGITAL CINEMA V-RAPTOR.

Q: 8. Does the bag have a belt loop so I can attach it to my belt while on set

A: This pouch does not have a belt loop; I have mine velcroed to my 1510 Pelican so I always know where it's at!

Q: 9. will this work with the RED DSMC2 Production Module? (with 5-pin 0B Lemo connection for timecode)

A: Yes, the Tentacle Sync Tentacle to 5-Pin LEMO Cable is compatible for use with the timecode connections on the RED DIGITAL CINEMA DSMC2 Production Module.

Q: 10. Can this work to power the Small HD cine7 monitor? I see someone has asked about indie7 but just wanted to check. I know they list it as for something teradek cube, etc. but what makes it different that it wouldn't work on the cine7?

A: This cable can power the SmallHD Cine 7 monitor. 2-pin LEMO cables are cross compatible with different brands that have a 2-pin LEMO port.

Paul	24/09/2024
[5-pin Lemo] I use this to send timecode from Tentacle to Red Komodo, via Mutiny I/O. 5

Adrian	28/08/2024
[5-pin Lemo] Works well. Do not get curious and unscrew the alum part (I did), it's hard to reassemble (I did that too) 5

Yuki	11/08/2024
[2' (61 cm)] If you have mini LF or Alexa 35, and want to use Tilta Nucleus M, this is a perfect cable for you. It connects to the 3pin port and power the motor. On top of that, it adds the ability to use run stop. 5

John	24/07/2024
[2' (61 cm)] Solid cable! Great connections. Sometimes P-Tap are loose and janky, but this one clicks right in. My only comment is that the correct product was delivered, but it's not as-pictured. The LEMO connection is partially wrapped in bright red rubber, which is great and should add to the longevity of the cable, but it's worth noting that the product differs than the photo on B&H. 5

Ryan	06/06/2024
[5-pin Lemo] It seems pretty good. No complaints. Its a well built cable 5

jim m.	16/05/2024
[6 x 3.5 x 1"] Good length, made well, works well. Hoping it last awhile. 5

Victor	15/05/2024
[6 x 3.5 x 1"] This short P-tap to lemo is prefect to connect the Bolt to our hand held director's monitor. (NOT COMPATIBLE WITH BARTECH) 5

Christian	14/05/2024
[2' (61 cm)] As with many things Tilta makes, a decent quality and a competitive price. These cables are far more from other brands, so I use this to power smallHD monitors which works well. I wish the cable wasn't as long on the connection point - they protrude quite a lot, but they have worked well so far. 5

Benjamin	06/05/2024
[5-pin Lemo] Great, but the price. The price is just stupid. It's so incredibly over priced for what it is. I'm certain this item won't fail me, but my god – the price for some cable. 5