For connecting to a one channel balanced input, the PSC Red Epic XLR to 1/8" Stereo Mini Jack CablefromPSC Red Epic XLR to 1/8" Stereo Mini Jack Cablecan get the job done. It can be used for various devices in audio, for applications such as, cameras, recorders, microphones and more. The 3-pin XLRF to stereo 1/8" (3.5 mm) balanced jack is suitable for connecting 3-pin XLRM dynamic microphones to consumer cameras.

For Cameras, Recorder and Microphones    Balanced Input

Related Questions and Answers

Q: 1. Is shielding/xlr design strong enough for this to be run next to a power strip or two (hehe) and have less distortion than a standard or high quality 3.5mm cable?

A: No guarantees - but it very well may help.

Q: 2. Will this cable allow me to attach a Rode VideoMic Pro Plus mic to the XLR input on Canon C100 Mark II video camera? THANKS!

A: No, you will use a Rode VXLR to make the conversion: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 3. Hello. I have a Salora Hi-Fi 6300 Micro with 2 Salora KS 430 Hi-Fi speakers, will it works fine? I mean, this speakers have a very high quality, and want to know if this will work enough or need some better

A: If the connectors are correct, they'll work. To prevent quality drop, use as short as cable as possible.

Q: 4. Is the xlr connector balanced or unbalanced? Will this work with Sennheiser ew100 series receivers?

A: This Comprehensive cable is not going to work as an output cable for a Sennheiser ek100 camera-mountable receiver. The 3.5mm end needs to be a locking 3.5mm TRS connector and the XLR connector would need to be male. The Sennheiser CL100 cable (B&H# CL100) is the same cable that is included with the ek100 receiver and in ew 100 series wireless microphone systems that include the camera0mountable receiver. This cable is unbalanced. The Sennheiser CL500 cable (B&H# SECL500) is the same balanced receiver output cable that is included with the ek500 receiver and with ew 512P and ew 500 FILM wireless mic systems.

Q: 5. Is it feasible to connect a Rode VideoMic on a boom pole with this cable to a Saramonic SR-PAX2 mixer (or similar)? Or what cable(s) could I use, please?

A: Yes as long you have one of the Rode Videomic models where the cable detaches, it will work straight into the SR-PAX1 XLR input.

Q: 6. Will this power the red raven dsmc2 with base i/o expander?

A: In order that we may better assist you, please write us with further detail. provideo@bhphoto.com.

Q: 7. Is the XLR terminal a MINI?...can it be used in the blackagic pocket 6K camera?

A: Hi Angel. It is a mini XLR Male, I apologize that that info was missing. As far as using this with a Blackmagic Pocket 6K, we can't say for sure- these were designed for RED Cameras, however if the pinout is similar on the Blackmagic camera then this should work. Thanks!

Q: 8. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 9. what size is the external mic jac on a sony ax700?

A: The mic input on the Sony AX700 is 1/8" / 3.5 mm.

Q: 10. Can this be used for other wireless receivers, to feed an XLR input on a recorder?

A: Yes you can!