The black JBL PD6200/66 Passive Biamp Loudspeaker Blackis a versatile, high-output speaker well suited for professional installations such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live music venues, night clubs, sports facilities, and theme parks.

The PD6200/66 is comprised of the JBL CMCD-82H cone midrange compression driver with integral 8" diameter Differential Drive dual voice coil driver, and a 2432H, 1.5" exit high-frequency compression driver. The large format PT Progressive Transition waveguide provides a 60 x 60 coverage pattern. The waveguides are rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. The PD6200/66 will perform as either a bi-amped or passive cabinet, at the flick of a switch.

High Output    8" CMCD Cone Midrange Compression Driver    1.5" Exit HF Compression Driver    Progressive Transition Waveguide    Rotatable Horns for V/H Deployment    60 x 60° Coverage    Frequency Response: 200 Hz to 18 kHz    NL4 speakON and Barrier Strip Inputs    DuraFlex Finish    M10 Threaded Attachments for Rigging

•  High-power 8" dual-coil CMCD cone midrange compression driver provides high sensitivity and high-continuous SPL capability along with low distortion, extended bandwidth, and improved phase coherence
• Large-format neodymium HF driver provides clear, intelligible high-frequency projection
• Large PT Progressive Transition waveguides provide consistent 60 x 60° pattern control, low distortion at high SPL levels and smooth frequency response
• Rotatable mid- and high-frequency waveguides allow either horizontal or vertical cabinet orientation
• Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes

Related Questions and Answers

Q: 1. what would be a recommended amp to run four of these speakers?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will work well with the: Crown Audio DSi 2.0 Series LA4 1200W 4-Channel Amplifier for JBL Cinema Loudspeakers B&H # CRLA4 Key Features: For Professional Cinema Rooms JBL Cinema Speaker Tuning Presets 2200W at 4 Ohms per Channel DriveCore Technology for Reliability Intuitive LCD Screen for Set Up Onboard 96 kHz/32-Bit DSP Crossovers, EQ, Delay, Filters, Limiting RJ45 for HARMAN Audio Architect Software SNMP for Theater Management Systems

Q: 2. Recomended 8Ω JBL or CROWN amplifier for 2 per channel 18C/T?

A: The JBL CSA 2120Z Audio Amplifier - 2 x 120W (B&H # JBCSA2120Z) that James recommended is a good option since it can be used as a 70V or standard amp and its power rating makes it a good match for use with two of the JBL 18C/T speakers on each channel. Crown's XTi 1002 (B&H # CRXTI1002) is a standard stereo amp rated at 275W per channel at 8 Ohms which could also work for you. As another option, the QSC ISA300Ti Commercial Power Amplifier (B&H # QSISA300TI) is a standard amp rated at 180W per channel at 8 Ohms and also operates at 70V for a constant voltage setup.

Q: 3. Where are the mounting points? Will this unit work with the JBL mounting eyehook kit?

A: The JBL AM5212/95 Loudspeaker System has 15 mounting points - 4 on the top, 4 on the bottom, 2 on each side, and 3 on the back - which use M10 eyebolts with washers such as the JBL 229-00009-01 Eyebolt Kit for Select JBL Loudspeakers - Set of 3 (B&H # JBHKSPVS).

Q: 4. What warranty is on qsc e112

A: This QSC E112 12" Two-Way Passive Loudspeaker (Black) BH #QSE112BK • MFR #E112-BK would have a 3 year manufacturers warranty.

Q: 5. How would these be in a 700sq movie viewing room?

A: A pair or two of the JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would be thunderous in the small space you have described.

Q: 6. do these connect with a speaker wire or something else?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will require connection to an amplifier via speaker wire/cabling.

Q: 7. what mounting hardware would you use?

A: These are bookshelf speakers. I really wouldn't bother to mount them, you will probably loose a lot of low end. The best way to mount them would be a simple shelf.

Q: 8. Where did it make?

A: JBL manufacturers its products in several different parts of the world but does not specify where individual products such as the JBL Control 5 Passive 6.5" 2-Way 175W Loudspeakers are made.

Q: 9. What are the inputs?

A: The connectors are 6 x Removable Locking 2-Pin Connectors with Screw-Down Terminals.

Q: 10. Is the price for each or a pair?

A: The price is for a single unit, not a pair.