The black JBL PD6212/64 Passive Biamp Loudspeaker Blackis a versatile, high-output speaker well suited for professional installations such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live music venues, night clubs, sports facilities, and theme parks.

The PD6212/64 is comprised of the JBL M222-8A 12" low-frequency driver with a 3" voice coil and a 2453H 1.5" exit high-frequency compression driver with a 4" voice coil. The two PT Progressive Transition waveguides provide 60x40° of coverage and both are rotatable for deploying the loudspeaker system in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap, while a well-controlled off-axis response enhances arrayability. The PD6212/64 will perform as either a biamped or passive cabinet, at the flick of a switch.

High Output    Horn-Loaded 12" Low-Frequency Driver    1.5" Exit HF Compression Driver    Progressive Transition Waveguides    Rotatable Low- & Hi-Frequency Waveguides    60 x 40° Coverage    Frequency Response: 90 Hz to 16 kHz    NL4 speakON and Barrier Strip Inputs    DuraFlex Finish    M10 Threaded Attachments for Rigging

• 12" horn-loaded LF woofer and large format HF compression driver
• High-sensitivity design with high continuous SPL capability
• Large PT Progressive Transition waveguides provide consistent 60 x 40° pattern control, low distortion at high SPL levels and smooth frequency response
• Rotatable low- and high-frequency waveguides allow either horizontal or vertical cabinet orientation
• Sophisticated, steep-slope passive crossover network with switchable biamp/passive crossover modes

Related Questions and Answers

Q: 1. What amp would work with these speaker and theOklahoma Sound GSL-S-LWM-5 Greystone Lectern with Speaker and Wireless ?

A: JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would work well with a powerful amplifier like the: Crown Audio XLS 2502 Stereo Power Amplifier (775W at 4 Ohm) B&H # CRXLS2502 775W at 4 Ohm Per Channel Band Pass Filter Per Channel Selectable Input Sensitivity Security Settings Disables Menu Buttons XLR, 1/4", and RCA Inputs Integrated PureBand Crossover System Efficient Forced-Air Fans Remote Power Trigger Peakx Limiters Provide Maximum Output Remote Power Trigger

Q: 2. Can I use this on a 70v amp like the JBL CSA 1300z?

A: The JBL CSA 1300Z Single-Channel 300W Amplifier can operate at 8 ohms, so you can use it to power one JBL CBT 70J-1 Line Array Column Loudspeaker.

Q: 3. Is the price for each or a pair?

A: The price is for a single unit, not a pair.

Q: 4. What is the length of the C211 speaker

A: Dimensions 31" H x 40" W x 12" D (79 x 102 x 30.5 cm)

Q: 5. Is there a temperature range these can be installed in?

A: This is rated to work between -67 degrees to 120 degrees F. based upon a Mil Spec rating of 810 as listed in the product spec sheet. https://jblpro.com/en/site_elements/jbl-professional-specifications-awc82-spec-sheet

Q: 6. this loud speaker 3 way 4732 MADE BY USA / CHINA / KOREA ?

A: According to the information in our system provided by JBL, at this time the 4732-T is manufactured in Mexico.

Q: 7. Does this speaker support upper and lower pole mount options?

A: The Mackie C200 Passive 10" 2-Way Loudspeaker has a single pole mount socket on the bottom of the speaker and also has an asymmetrical trapezoidal cabinet for floor monitor positioning.

Q: 8. I am looking to have these speakers controlled by a lecture amp ?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 should have a minimum of 100 watts input at 8 ohms. Check your lectern's amplifier output rating.

Q: 9. What bracket do we use with the ac 28w speaker?

A: JBL recommends the JBL U Bracket f/Models AC28/XX white finish7. That would be B&H part number B&H # JBMTU28WH.

Q: 10. What are the inputs?

A: The connectors are 6 x Removable Locking 2-Pin Connectors with Screw-Down Terminals.