The white JBL PD6212/95 Passive Biamp Two-Way Loudspeakeris a versatile, high-output speaker well suited for professional installations such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live music venues, night clubs, sports facilities, and theme parks.

The PD6212/95 is comprised of the JBL M222-8A 12" low-frequency driver with a 3" voice coil and a 2453H 1.5" exit high-frequency compression driver with a 4" voice coil. The two PT Progressive Transition waveguides provide 90x50° of coverage and both are rotatable for deploying the loudspeaker system in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap, while a well-controlled off-axis response enhances arrayability. The PD6212/95 will perform as either a biamped or passive cabinet, at the flick of a switch.

High Output    Horn-Loaded 12" Low-Frequency Driver    1.5" Exit HF Compression Driver    Progressive Transition Waveguides    Rotatable Low- & Hi-Frequency Waveguides    90 x 50° Coverage    Frequency Response: 90 Hz to 16 kHz    NL4 speakON and Barrier Strip Inputs    DuraFlex Finish    M10 Threaded Attachments for Rigging

• 12" horn-loaded LF woofer and large format HF compression driver
• High-sensitivity design with high continuous SPL capability
• Large PT Progressive Transition waveguides provide consistent 90 x 50° pattern control, low distortion at high SPL levels and smooth frequency response
• Rotatable low- and high-frequency waveguides allow either horizontal or vertical cabinet orientation
• Sophisticated, steep-slope passive crossover network with switchable biamp/passive crossover modes

Related Questions and Answers

Q: 1. Where are the mounting points? Will this unit work with the JBL mounting eyehook kit?

A: The JBL AM5212/95 Loudspeaker System has 15 mounting points - 4 on the top, 4 on the bottom, 2 on each side, and 3 on the back - which use M10 eyebolts with washers such as the JBL 229-00009-01 Eyebolt Kit for Select JBL Loudspeakers - Set of 3 (B&H # JBHKSPVS).

Q: 2. It looks like the C221 is side-ported. How much space is required between them in an LCR configuration for the ports to work as designed?

A: The Ports sum with the LF almost in place. As long as the ports are not obstructed, there shouldn’t be an issue.

Q: 3. Are these powered speakers?

A: They are not- they require a separate amplifier.

Q: 4. Is this for one or a pair?

A: This is a single speaker.

Q: 5. I know that the maximum throw is about 44 ft. But, what is the minimum distance? In other words, how close can I sit before integration is compromised? Is 10-12 ft too close?

A: The JBL Two-Way ScreenArray Cinema Loudspeaker (B&H # JBC211) has a minimum usable distance of about 3'. Ideally, listeners should be within a 20° angle of the front of the speaker.

Q: 6. Hi Im trying to get this speaker to Taiwan and wondering how much shipping do I have to pay? Can I pay by visa credit card?(all the pay method way you offered I dont use them) How does warranty work for Taiwan, please? Thank you !

A: Unfortunately the question you're asking cannot be answered with our Q+A feature. Please contact our Sales directly for assistance.Email: Sales@bhphotovideo.com

Q: 7. What kind of power amplifier do I need to power this passive speaker?

A: The Crown Audio XLi 800 Stereo Power Amplifier, B&H # CRXLI800, set to bridged mono mode, would be a good choice for powering one JBL PRX415M passive speaker, which requires 600 watts of program power.

Q: 8. Maximum throw distance is 15m, but how close can the front be before driver integration and directionality compromises performance? Is 10 - 12 ft too close?

A: For all of the C211, The Horn is aimed down 10° and the system sums at about 3’ feet between the Woofer and Horn. The C221, C222, C222HP use a dual dissimilar technology that beams the HF downwards as required for commercial cinemas with stadium seating. I would not recommended these for home installs(with Limited Height) if the seats are not within the -20° angle of the horn.

Q: 9. do these connect with a speaker wire or something else?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will require connection to an amplifier via speaker wire/cabling.

Q: 10. What amp would work with these speaker and theOklahoma Sound GSL-S-LWM-5 Greystone Lectern with Speaker and Wireless ?

A: JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would work well with a powerful amplifier like the: Crown Audio XLS 2502 Stereo Power Amplifier (775W at 4 Ohm) B&H # CRXLS2502 775W at 4 Ohm Per Channel Band Pass Filter Per Channel Selectable Input Sensitivity Security Settings Disables Menu Buttons XLR, 1/4", and RCA Inputs Integrated PureBand Crossover System Efficient Forced-Air Fans Remote Power Trigger Peakx Limiters Provide Maximum Output Remote Power Trigger