The white JBL PD6322/64 Passive Three-Way Loudspeaker Whiteis a versatile, high-output speaker delivering clear and intelligible high-frequency projection, an extended low-frequency response, and low distortion at even the highest drive levels. The loudspeaker is well suited for professional installations such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live music venues, night clubs, sports facilities, and theme parks.

The PD6322/64 is comprised of two JBL 2206H 12" Vented Gap Cooled (VGC) low-frequency transducers with 4" voice coils, a CMCD-82H 8" cone midrange compression driver with a 3" voice coil, and a 2432H, 1.5" exit compression driver with 3" voice coil. The midrange compression driver consists of a driver/phasing plug assembly providing high output with low distortion. The two PT Progressive Transition waveguides provide 60x40° of coverage and both are rotatable for deploying the loudspeaker system in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap, while a well-controlled off-axis response enhances arrayability. The PD6322/64 will perform as either a tri-amp or bi-amp (passive mid-high) cabinet, at the flick of a switch.

High Output    2 x Slot-Loaded 12" Low-Frequency Drivers    Horn-Loaded Midrange Compression Driver    1.5" Exit HF Compression Driver    Progressive Transition Waveguides    Rotatable Mid- & Hi-Frequency Waveguides    60x40° Coverage    Frequency Response: 49 Hz to 16 kHz    NL8 speakON and Barrier Strip Inputs    M10 Threaded Attachments for Rigging

• Two high-power 12" transducers in a compact slot-loaded configuration for low-frequency extension to 40 Hz
• High-power Cone Midrange Compression Driver (CMCD) with a driver/phasing plug assembly provides high sensitivity and high continuous SPL capability along with low distortion, extended bandwidth, and improved phase coherence
• Large format neodymium HF driver provides clear, intelligible high-frequency projection
• Large Progressive Transition(PT) waveguides provide consistent pattern control, low distortion at high SPL levels, and a smooth frequency response
• Rotatable mid- and high-frequency waveguides allow either horizontal or vertical cabinet orientation.
• Sophisticated, steep-slope passive mid/high crossover network with switchable tri-amp/bi-amp crossover modes

Related Questions and Answers

Q: 1. What bracket do we use with the ac 28w speaker?

A: JBL recommends the JBL U Bracket f/Models AC28/XX white finish7. That would be B&H part number B&H # JBMTU28WH.

Q: 2. Where are the mounting points? Will this unit work with the JBL mounting eyehook kit?

A: The JBL AM5212/95 Loudspeaker System has 15 mounting points - 4 on the top, 4 on the bottom, 2 on each side, and 3 on the back - which use M10 eyebolts with washers such as the JBL 229-00009-01 Eyebolt Kit for Select JBL Loudspeakers - Set of 3 (B&H # JBHKSPVS).

Q: 3. How would these be in a 700sq movie viewing room?

A: A pair or two of the JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would be thunderous in the small space you have described.

Q: 4. Is the price for each or a pair?

A: The price is for a single unit, not a pair.

Q: 5. What is the length of the C211 speaker

A: Dimensions 31" H x 40" W x 12" D (79 x 102 x 30.5 cm)

Q: 6. do these connect with a speaker wire or something else?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will require connection to an amplifier via speaker wire/cabling.

Q: 7. Is this for one or a pair?

A: This is a single speaker.

Q: 8. What kind of power amplifier do I need to power this passive speaker?

A: The Crown Audio XLi 800 Stereo Power Amplifier, B&H # CRXLI800, set to bridged mono mode, would be a good choice for powering one JBL PRX415M passive speaker, which requires 600 watts of program power.

Q: 9. this loud speaker 3 way 4732 MADE BY USA / CHINA / KOREA ?

A: According to the information in our system provided by JBL, at this time the 4732-T is manufactured in Mexico.

Q: 10. Is there a temperature range these can be installed in?

A: This is rated to work between -67 degrees to 120 degrees F. based upon a Mil Spec rating of 810 as listed in the product spec sheet. https://jblpro.com/en/site_elements/jbl-professional-specifications-awc82-spec-sheet