Part of the Cyclone windshield system, this pair of Rycote Cyclone Universal Lyres is designed to effectively isolate microphones from handling noises and vibrations. These Lyre clips have a 62-shore hardness and are compatible with compact and lightweight shotguns microphones with a diameter ranging from 0.74 to 0.98" (19 to 25mm).

The Lyres have a proprietary design that's extremely robust and virtually unbreakable, as they do not use elastic or rubber components, which are prone to wear and tear. These completely backward-compatible Lyres have replaced the original silicone O-rings suspension and can be bought separately to upgrade older suspensions.

The soft-grip internal surface on the clip helps prevent the mic from twisting or slipping. It also keeps powder-coated mic's surface scratch-free.

For Cyclone Windshield System    For Lightweight 0.74-0.98" Diameter Mic    Prevents Handling Noise & Vibrations    Rigid Clip with Soft Grip Surface

Related Questions and Answers

Q: 1. Will the Rode NTG4+ fit inside this blimp (size medium)?

A: Yes it will. Just ensure that you position it properly on the mounts.

Q: 2. Can you purchase extensions for this blimp?

A: A boompole such as : https://www.bhphotovideo.com/c/product/326895-REG/K_Tek_KE_110CC_KE_110CC_Avalon_Series_Aluminum.html Additionally: https://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/accessories

Q: 3. Can i use with Rode Blimp??

A: These will work with a Rode Blimp as it is suitable for 19-25 mm diameter microphones.

Q: 4. Does it comes with screws?

A: Per Rycote, yes, screws are included: https://mymic.rycote.com/products/windshield-solutions/cyclone-windshield-kit/cyclone-pair-of-universal-lyre-72-shore/

Q: 5. I would like to remove the handle from this and mount it to a camera cage with a 3/8-16 or 1/4-20 screw. Would that be feasible by threading it through the hole the handle clamp screws through?

A: No problem grippper will attach to your rig as long as you have a 3/8 thread

Q: 6. hello I'm lookin for Rycote Lyre for an old system which are screwed from the front and rear (not top to bottom) ? thanks you for your answerBruno

A: Rode does carry parts for their older mics. Hopefully they can help to get you the correct Rycote Lyre shock mount for your mic. You can reach their customer service department by phone at 562-364-7400. Their US offices are based in California.

Q: 7. Will it fit Synco D1 ?

A: The Synco Mic-D1 Hypercardioid Shotgun Microphone is too long for use within the Rycote Super-Shield Kit for Shotgun Mics (Medium). The Rycote Super-Shield Kit for Shotgun Mics (Large) (BH #RYSSKL) is the proper choice for use with the Synco Mic-D1: https://bhpho.to/3U26PkT

Q: 8. Will these work for the RDE videomicro. I see the diameter matches but can it be put on the cold shoe part?

A: Hi Jason: thanks for your question! The technology behind the Lyres originates with Rycote; however, we have licensed Rde to manufacture their own version, and so the Lyre that comes with and fits the VideoMicro and similar/other products is designed and manufactured entirely by them. Rycote's official Lyres are not incorporated: any versions you see on Rde products are made by them using their own materials and production methods under licence. Please get in touch with Rde to resolve the issue here:a href= http://en.rode.com/contact target= _blank http://en.rode.com/contact./a

Q: 9. Would this Super-Shield be too large for the DPA 4018B?

A: This windshield kit should be compatible with this version of the 4018, https://www.bhphotovideo.com/c/product/1050594-REG/dpa_microphones_4018a_full_size_super_cardioid.html. Any other version may be too small.

Q: 10. this is good for MKE 600I still have ME67ME66What else do I need to purchase?It can be applied

A: To clarify: Modular 5 will accommodate only the MKE 600 and ME 66; Modular 7 will accommodate all three, but is larger than required for the MKE 600 in particular.