Produce a defined light with a clean shadow and contrast with this Dedolight 50mm Projection Lens for DP1 & DP2from Dedolight. Designed for the DP1- and DP2-series imagers, this lens will help you control the beam angle and focus the light. It also features a large f/2.8 aperture to ensure a high light output. And, thanks to a durable all-metal and heat-resistant construction, users will be able to use it without worry on their light heads.

For DP1.1, DP1S, DP2.1, and DP2S Imagers    Control Beam Angle and Focus    Large f/2.8 Aperture for High Output    Designed to Withstand High Heat

DP1.1
DP2.1
DP1S
DP2S

Related Questions and Answers

Q: 1. What illuminance does this light have?

A: Dedolight does not list the lumens or lux on the Dedolight Neo Color Lamphead. They list the watts consumption. It is around 80 watts maximum.

Q: 2. How long does the entire shipping process to Taiwan usually take ?The DHL site shows that the item has been in Frankfurt since 6/22.I've long been waiting for it.A little quicker,please?

A: I apologize, but this type of request cannot be taken care of through this feature of our website. Please contact our Customer Service department by entering Live Chat, emailing directly to cs@a href= http://bhphoto.com, target= _blank bhphoto.com,/a or calling us toll-free at 800.221.5743.

Q: 3. Will this fit the DLED4.1 head?

A: Yes it will.

Q: 4. Will this fit on the DLED 2.1 as well? Their videos show a DP1s is this the same?

A: The B&H page that describes the DLED 2.1, in the Acessories section, lists the DPS1 as the recommended imager for the DLED 2.1.I use the MDLH4 with the DP 1.1 imager and the 85 mm 2.8 lens. As far as I can tell there are only single versions of the lenses for all their imagers, which makes perfect sense.Alternatively, if you have a Leitz slide projector, the Leitz projector lens will fit BUT without the safe travel groove on the lens AND with the danger of an indent mark on the lens if over tightened.The imager and lens combination works really well. I also use the iris diaphgram attachment to control the light spread - it all works beautifully well with my macro projects.(The iris control lever has quality issues - it is loosely glued rather than screwed in - and should never be used to remove the diaphgram from the imager. Instead, loosen the attachment tightening screw on the imager and push from the bottom. This is not in any Dedo information.)

Q: 5. Dear All, how close to the back ground wall can it be placed? Thanks

A: How close this lens can be placed in relation to a background wall would be dependent on the type of lighting being used. For example, if this lens was used with one of the Dedolight DLH4 Tungsten Lights, that would produce a greater amount of heat versus using the lens with a Dedolight DLED4.1 LED Light.

Q: 6. How much weight can it hold?

A: This scissor clamp would be limited by how well the ceiling was anchored and supported.

Q: 7. Why is this diffuser 4x more money than other brands? Can it handle higher temps?

A: Some brands are better than others. Some brands have more recognition than others and some prices are how the manufactures has it set to.Dedolight is a very good lighting manufacture. It cannot handle more temperatures than most other brands.

Q: 8. How many inches does this hang down from the ceiling?

A: Being that the stud of the Dedolight Scissor Clamp with 5/8" Stud (B&H# DECLAMPS) is 6.25" (15.7cm) long, the end of the stud will be a little over 6" (15cm) below the height of the ceiling when installed.

Q: 9. I would like to find something exactly like this projector for my elinchrom lights. Most importantly the ability to use metal leaves to control the light projection. Can anyone recommend something with similar features for elinchrom studio strobes? I see Westcott make an "optical spot" modifier. Is this the only option available for elinchrom?

A: The Westcott Optical Spot by Lindsay Adler for Elinchrom, BH # WEOSLAELNCRM would be the only projection attachment currently offered to fit an Elinchrom head. https://bhpho.to/3mKC2Km

Q: 10. Is this the DP 1.1 or the universal (older model)?

A: This is the DP 1.1. It is not the universal.