Chrosziel 7-Pin Lemo Motor Cable For Al2/Magnum

Chrosziel 7-pin Lemo Motor Cable For Al2/magnum

Product Code: eq19876
Availability: In Stock

$822.00 $1,265.88

Qty

8 reviews Write a review

Description
Reviews (8)

Connect a motor to your Chrosziel 7-Pin LEMO Motor Cable for AL2/MagnumAladin or Magnum wireless follow focus receiver with the MOTD100 7-Pin LEMO Motor Cable. The motor cable is compatible with Heden M26VE, BTM, Scorpio SB92, and Preston DM2 digital motors.

39" in Length 7-Pin LEMO Connections Connects to Select Digital Motors

Parameters
Connector 1	7-pin LEMO
Connector 2	Angled 7-pin LEMO
Length	39" / 100cm
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	6.4 x 6.1 x 0.9"

Related Questions and Answers

Q: 1. Is this motor compatible with a Digital Bartech?

A: While we are not re-sellers of Digital Bartech products this motor is often bundles with those units. It should be compatible.

Q: 2. Is this male to male?

A: Yes, this is a Tilta 2-Pin to 2-Pin LEMO Cable (23") male to male.

Q: 3. I have a RED DSMC2 with Tilta's C1 cage, which has a 7 pin connector with "Motor" written on top of it. If I plug this cable into the MOTOR connector on my cage, will it provide power and camera control (REC start/stop) ?

A: No this will not work for Run stop controll of the camera this is used to connect a Nucleus-M 7-Pin Motor to Motor Cable from Tilta to connect one Nucleus-M lens control motor to another.

Q: 4. Would this work on a Heden Carat system to drive the motor?

A: According to Heden Engineering, yes, you can use this cable on the Heden Carat system.

Q: 5. What is the length of the cable?

A: Manufacturer confirmed that the cable is approximately 40 inches.

Q: 6. Will this connect to the z cam e2 s6 to ride video mic pro?

A: No, the Tentacle Sync Tentacle to 5-Pin LEMO Cable is not intended for use to connect a microphone to the Z CAM E2-S6 Cinema Camera. It is designed to send a timecode signal from a Tentacle Sync timecode generator to any camera or recorder using a 5-pin male LEMO input. The Rode VideoMic Pro has a 3.5mm TRS output which can be connected directly to the camera's 3.5mm TRS mic input. The camera's 5-pin LEMO port is intended to be used for dual-channel XLR microphones and requires an additional XLR audio connector like the CAMVATE Dual 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2723) or for single-channel, the CAMVATE 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2722).

Q: 7. Can I use this cable with CAMVATE V-Lock Mounting Plate Power Supply Splitter with 15mm Rod Clamp B&H#CAC1524 Mfr#C1524 ?

A: Yes, you can use this cable with the Camvate plate.

Q: 8. I wonder if this cable is exactly the same as the one that the follow focus brings? because on the pictures it looks different... it doesn't have the two protections before the lemo and dtap like the original.

A: The cable is a different design, but the ends are appropriate for powering the motors from a P/D-tap source.

Q: 9. Will this work with the Tiltamax Nucleus M wireless follow focus system?

A: This cable is specifically for Redrock Micro Product, it is not recommended for the Nucleus M. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com. From there we may be better able to find the proper product for your needs.

Q: 10. What is the difference between the CDM-100 and CDM-100W?

A: a LEMO 7-pin angled connector

Victor	27/09/2024
[7-pin LEMO] This short P-tap to lemo is prefect to connect the Bolt to our hand held director's monitor. (NOT COMPATIBLE WITH BARTECH) 5

Christian	18/09/2024
[39" / 100cm] As with many things Tilta makes, a decent quality and a competitive price. These cables are far more from other brands, so I use this to power smallHD monitors which works well. I wish the cable wasn't as long on the connection point - they protrude quite a lot, but they have worked well so far. 5

Marcin Majerski	04/09/2024
[39" / 100cm] Works Perfect! It is my First follow focus and it is very simply to use. Very good service and contact with sellers. Fo every questions i have fast feedback. Magnum its automatic calibrate and fast. He has a several options preset. It is also good work with hard cinema lenses and ring for lens. I recommend this product to professional work. In our TV also use this systems. 5

Billy N.	13/08/2024
[0.2 lb] Bought this for my Steadicam Flyer to mount RED batteries at the bottom of the sled and power everything up top. Does the job at a reasonable price. 5

Shawn	05/08/2024
[0.2 lb] Haven’t used it a ton yet. But compared it to the Teradek motor, and the Heden MV26 (paired with a It’s definiteky quieter and smaller - and about half the weight of the Teradek, which was already pretty light. I dig the ingenious rod clamp that adapts to either 15 or 19mm internally without the need for an adapter that you could lose. I am using it with my Chrosziel Magnum 200. Has no problem pulling stiffer cinema lenses. The only potential negative is that the cable that runs to the receiver is fixed. So while that reduces weight with the reduced connector, if the cable gets damaged, your motor is out of commission until the motor cable is repaired (taking the whole motor out of use). I intend on having a backup motor. Given that Chrosziels system is compatible with other brands of motors (unlike the Teradek), should be easy to find one to swap in. 5

Manuel	24/07/2024
[39" / 100cm] Chrosziel really stands for German quality and costumer service. I had the chance to test this and I can say it's a very strong motor, ideal for crash zooms but also for slow, smooth zooms on cine lenses! It also has a Photolens-Mode but for that it raises the minimum zoom speed. Also you dont need to own a FX6 or any of the other supported Sony cams. Just plug your LANC-Controller into the motor and you can use it with any camera. The Chrosziel Team also was very helpful with any questions I would have and offered great and fast costumer service which is something I value a lot! 5

Clifford	06/07/2024
[7-pin LEMO] I priced having this cable costume made to save some money but I couldn’t find a vendor that could do it. But if you have two motors it is worth having to lessen the cables on your camera. 5

Benjamin	05/07/2024
[39" / 100cm] Great, but the price. The price is just stupid. It's so incredibly over priced for what it is. I'm certain this item won't fail me, but my god – the price for some cable. 5