The twenty-five foot Kopul Y-Cable 1/8" TRS to 2 XLR Male 25'from Kopul Y-Cable 1/8" TRS to 2 XLR Male 25'is a sturdy and reliable Y-cable that sends a stereo signal from a 1/8" (3.5 mm) output to two XLR male connectors without any signal loss. The cable allows for a variety of cabling options including connecting the output of a portable audio device, personal music player, or computer to a mixer or other device that has XLR inputs.

The gold-plated 1/8" (3.5 mm) stereo mini plug and nickel-plated XLR connectors with silver-plated contacts assure the transfer of the audio signal without any degradation. Oxygen-free copper spiral shielding provides enhanced protection from interference while maintaining flexibility.

To provide strain relief to the 1/8" connector, the in-line molded splitter is positioned approximately halfway down the length of the cable. This means that when used to connect to two monitors, the split cables will allow you to spread them apart a maximum of twenty-five feet, equal to the total length of the cable. Using an in-line molded splitter ensures maximum reliability and greater durability compared to Y-cables that are split at the 1/8" connector.

Gold-Plated 1/8" Rean Connector    Nickel-Plated XLR Connectors    No Signal Loss at the Two Outputs    OFC Spiral-Shielding for RF Rejection    Durable In-Line Molded Splitter

Gold-plated 1/8" (3.5 mm) TRS stereo mini connector manufactured by Rean, a Neutrik trademark

Nickel-plated male XLR connectors with silver-plated contacts and die-cast zinc housing with chuck-style strain relief

Premium OFC spiral-shield for enhanced protection from interference while still maintaining flexibility

No signal loss between the 1/8" output and the dual XLR connectors

In-line molded splitter provides strain relief and greater durability than Y-cables that split at the connector

Related Questions and Answers

Q: 1. Fixing the XLR gender being wrong with adapters, will these extenders pass audio in both directions on the Ethernet cable?

A: XLR is not de-facto a directional medium, which is to say that it's really just a set of three pins with copper wire in between. Audio can only flow one way from an XLR connector to another, but it doesn't actually matter which direction that is. So, if for some reason you have audio passing from male jack 1 of the Kopul 4-Channel XLR Network Cable Extender Kit to female jack 1, that will work fine. You just can't have audio flowing both ways at the same time between two connectors.

Q: 2. Will a wireless lav receiver with a 1/8 mono, male jack work with this adapter?

A: Yes, the Kopul XLR to Mini Adapter will adapt the 1/8 plug to XLR from a wireless lav receiver.

Q: 3. Roland's list for this RCC-3-TRXM cable subtitles it a "balanced interconnect cable," but the product package diagram shows one lead and one shield; no 3rd lead for balancing signal. So which is this: bal/unbal?

A: The RCC-3-TRXM is a balanced audio cable. The XLR and 1/4" TRS connectors provide a balanced signal.

Q: 4. Is it feasible to connect a Rode VideoMic on a boom pole with this cable to a Saramonic SR-PAX2 mixer (or similar)? Or what cable(s) could I use, please?

A: Yes as long you have one of the Rode Videomic models where the cable detaches, it will work straight into the SR-PAX1 XLR input.

Q: 5. Will this cable allow me to attach a Rode VideoMic Pro Plus mic to the XLR input on Canon C100 Mark II video camera? THANKS!

A: No, you will use a Rode VXLR to make the conversion: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 6. Does this adapter convert 48v phantom power down to 5v?

A: This allows you to connect a mic equipped with a 3.5mm TRS connector to an XLR input. The mics you would be using will need to have their own power supply, it will not allow them to be powered through Phantom Power.

Q: 7. What gauge?

A: 24 AWG

Q: 8. Will this work with the microphone cable from the Nady QHM-100 Closed-Back Stereo Headphones with Boom Mic? I'm looking at using it for the BMD ATEM Talkback Converter.

A: Unfortunately the Nady QHM-100 will not operate when connected via an adapter to an XLR input. The mic requires power only able to be provided by a 3.5mm jack. You are able to connect a standard broadcast headset that features a dynamic mic which does not require power via the XLR jack. The Audio Technica BPHS-1 is currently the best we have to offer in terms of price and correct connections (XLR for mic, and 1/4 TRS headphone).

Q: 9. I have a Tascam DR40 and a AudioTechnica 3350 Lavallier mic. Is this going to work ?

A: This is the type of converter that is used for connecting mics with a 1/8 /3.5mm TRS plug into a device with a XLR plug. In other words, yes, it will work.

Q: 10. Can I use this cable to plug a Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface?

A: No, the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is not compatible for use with the Deity Microphones V-Mic D3 Pro Shotgun Microphone. The V-Mic D3 Pro requires plug-in power to function, so you will need to use an XLR adapter with a phantom power converter like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DEDXLR), which is the adapter that Deity includes with their location recording bundle for connection to an XLR input, and connect to a device that will supply phantom power. The D-XLR adapter will allow you to use the original 3.5mm TRRS smart cable that comes included with the microphone to convert the plug and enable compatibility for connection to the XLR input on the Focusrite Scarlett Solo USB Audio Interface. You will need to have the phantom power (48V) switch for the XLR input on the interface turned on in order to supply power the mic. If you need a longer cable, simply attach a standard XLR to XLR cable between the XLR input on the interface and the XLR output on the Deity D-XLR adapter. For example, you can use the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - 10' (B&H # KOM3010) or similar cable in any length you prefer for your extension.