The fifteen foot Kopul Y-Cable 1/8" TRS to 2 XLR Male 15'from Kopul Y-Cable 1/8" TRS to 2 XLR Male 15'is a sturdy and reliable Y-cable that sends a stereo signal from a 1/8" (3.5 mm) output to two XLR male connectors without any signal loss. The cable allows for a variety of cabling options including connecting the output of a portable audio device, personal music player, or computer to a mixer or other device that has XLR inputs.

The gold-plated 1/8" (3.5 mm) stereo mini plug and nickel-plated XLR connectors with silver-plated contacts assure the transfer of the audio signal without any degradation. Oxygen-free copper spiral shielding provides enhanced protection from interference while maintaining flexibility.

To provide strain relief to the 1/8" connector, the in-line molded splitter is positioned approximately halfway down the length of the cable. This means that when used to connect to two monitors, the split cables will allow you to spread them apart a maximum of fifteen feet, equal to the total length of the cable. Using an in-line molded splitter ensures maximum reliability and greater durability compared to Y-cables that are split at the 1/8" connector.

Gold-Plated 1/8" Rean Connector    Nickel-Plated XLR Connectors    No Signal Loss at the Two Outputs    OFC Spiral-Shielding for RF Rejection    Durable In-Line Molded Splitter

Gold-plated 1/8" (3.5 mm) TRS stereo mini connector manufactured by Rean, a Neutrik trademark

Nickel-plated male XLR connectors with silver-plated contacts and die-cast zinc housing with chuck-style strain relief

Premium OFC spiral-shield for enhanced protection from interference while still maintaining flexibility

No signal loss between the 1/8" output and the dual XLR connectors

In-line molded splitter provides strain relief and greater durability than Y-cables that split at the connector

Related Questions and Answers

Q: 1. Will this work to get a Sennheiser lav ew 122 or ME 2-II wired?

A: No, the adapter you need is the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). This adapter will convert the 3.5mm plug to XLR and also allow converts phantom power (typically 48V) from a mixer or recorder to plug-in power (approximately 3 to 5V) which the lav mic needs to operate. The Kopul adapter only converts the plug to XLR but will not convert phantom power to plug-in power.

Q: 2. Does this work with the DJI Wireless mic system?

A: Yes, the Kopul A-XMMF 3.5mm TRS Female to XLR Male Adapter could be used with the DJI Mic wireless system as long as the receiver's output is set to mono.

Q: 3. Will this work to plug Deity connect W-lav pro and W-lav micro lavalier mics into XLR plugs on a Tascam DR-40 linear pcm recorder and a Motu M2 and will I need to use these two devices with or without Phantom power?

A: No, the Kopul A-XMMF is not compatible. It is intended for use with microphones that have a 3.5mm connector and does not convert phantom power to plug-in power. The Deity W.Lav Pro and W.Lav Micro use a MicroDot connector. You can use the DPA Microphones DAD6001 MicroDot to 3-pin XLR Adapter (B&H# DPDAD6001BC) which has the correct connectors you need and will convert phantom power to plug-in power for the Deity W.Lav Pro and Micro lavalier mics.

Q: 4. Hello. I have a Salora Hi-Fi 6300 Micro with 2 Salora KS 430 Hi-Fi speakers, will it works fine? I mean, this speakers have a very high quality, and want to know if this will work enough or need some better

A: If the connectors are correct, they'll work. To prevent quality drop, use as short as cable as possible.

Q: 5. Will a wireless lav receiver with a 1/8 mono, male jack work with this adapter?

A: Yes, the Kopul XLR to Mini Adapter will adapt the 1/8 plug to XLR from a wireless lav receiver.

Q: 6. What gauge?

A: 24 AWG

Q: 7. Will this work with the microphone cable from the Nady QHM-100 Closed-Back Stereo Headphones with Boom Mic? I'm looking at using it for the BMD ATEM Talkback Converter.

A: Unfortunately the Nady QHM-100 will not operate when connected via an adapter to an XLR input. The mic requires power only able to be provided by a 3.5mm jack. You are able to connect a standard broadcast headset that features a dynamic mic which does not require power via the XLR jack. The Audio Technica BPHS-1 is currently the best we have to offer in terms of price and correct connections (XLR for mic, and 1/4 TRS headphone).

Q: 8. Can I use this cable to plug a Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface?

A: No, the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is not compatible for use with the Deity Microphones V-Mic D3 Pro Shotgun Microphone. The V-Mic D3 Pro requires plug-in power to function, so you will need to use an XLR adapter with a phantom power converter like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DEDXLR), which is the adapter that Deity includes with their location recording bundle for connection to an XLR input, and connect to a device that will supply phantom power. The D-XLR adapter will allow you to use the original 3.5mm TRRS smart cable that comes included with the microphone to convert the plug and enable compatibility for connection to the XLR input on the Focusrite Scarlett Solo USB Audio Interface. You will need to have the phantom power (48V) switch for the XLR input on the interface turned on in order to supply power the mic. If you need a longer cable, simply attach a standard XLR to XLR cable between the XLR input on the interface and the XLR output on the Deity D-XLR adapter. For example, you can use the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - 10' (B&H # KOM3010) or similar cable in any length you prefer for your extension.

Q: 9. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 10. Does this adapter convert 48v phantom power down to 5v?

A: This allows you to connect a mic equipped with a 3.5mm TRS connector to an XLR input. The mics you would be using will need to have their own power supply, it will not allow them to be powered through Phantom Power.