This TrekPak Divider Kit for Pelican 1550 Casefrom TrekPak Divider Kit for Pelican 1550 Caseis designed for use within a Pelican 1550 Medium Protector Case. It can replace an existing divider system, or be used to create partitions within a compatible and completely empty Pelican case.

TrekPak divider kits utilize water-, tear-, and shred-resistant foam dividers with a corrugated plastic core, plus steel U-shaped divider locking pins. Once installed, they maximize available carrying space, protect equipment or valuables for transport, and provide interior organization that can easily be rearranged or customized along with any changes to the contents of the Pelican case.

The divider kit's design allows one of the two prongs on a divider locking pin to be inserted within a partition's corrugated core. Two adjacent partitions can accommodate both prongs on a single divider locking pin, resulting in them being firmly held together. Each divider locking pin features a nylon pull tab for easy removal, and the rapid release of any connected partitions.

Included within this divider kit is a perimeter insert, two 13.75" divider sections, two 20" divider sections, one 6" divider section, 20 divider locking pins, a divider cutter, and one bottom as well as one convoluted, egg-crate top foam unit. To ensure that the dividers properly correspond to a Pelican 1550 Medium Protector Case's 7.72" internal height, the bottom foam unit must always be used when installing this divider kit. The perimeter insert can then be placed on top of the bottom foam unit so it conforms to the interior sides of the Pelican case. Like the dividers, the perimeter insert is constructed from foam with a corrugated core so a partition can be connected to the perimeter insert by a divider locking pin.

Items to be stored within the Pelican case can then be arranged on top of the bottom foam unit and within the perimeter insert before they are segmented using the dividers. Like the divider locking pins, the cutting tool integrates with the dividers' corrugated core. Multiple partitions can be quickly, easily, and precisely created by sliding the cutting tool through the dividers which can then be arranged and rearranged according to whatever is placed within the Pelican case.

A previously-installed top foam unit within a compatible Pelican case's lid does not need to be replaced with the included convoluted, egg-crate foam. However, when in use, the egg-crate foam's soft peaks help maximize cushioning to the contours of items that come into the most contact with it.

Fitted for Pelican 1550 Protector Case    Continuously-Adjustable Divider System    Organizes and Protects Case Contents    Maximizes Available Space    Fast, Easy Configuration    Durable and Soft Foam Dividers    Water, Tear, and Shred Resistant    Steel Divider Locking Pins    Egg-Crate Lid Foam, Bottom Layer Foam    Made in the USA

• For use within a Pelican 1550 Medium Protector Case
• Replaces an existing divider system, or can be used to create partitions within a compatible and completely empty Pelican case
• Maximizes available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged or customized
• Utilizes water-, tear-, and shred-resistant foam dividers with a corrugated plastic core, plus steel U-shaped divider locking pins
• Divider kit provides a perimeter insert, two 13.75" divider sections, two 20" divider sections, one 6" divider section, 20 divider locking pins, one divider cutter, and one bottom as well as one convoluted, egg-crate top foam unit
• Cutting tool allows quick, easy, and precise creation of multiple partitions from divider sections
• Divider locking pins create firm connections among perimeter insert and partitions
• Nylon pull tab on each divider locking pin allows perimeter insert and partitions to be separated for fast configuration changes
• Bottom foam unit ensures that the included dividers properly correspond to a Pelican 1550 Medium Protector Case's 7.72" internal height
• Convoluted, egg-crate lid foam's soft peaks help maximize cushioning to the contours of items that come into the most contact with it

  Related Questions and Answers

  Q: 1. Would the 1535 TrekPak fit in a Nanuk 935 case?

  A: This would work in the Nanuk 935 if you notch the corner of the TrekPak for the wheels in the Nanuk.

  Q: 2. can i fit a zhiyun weebill s?

  A: You will be able store the Zhiyun Weebill S into the hard case.

  Q: 3. Are the bottoms of the dividers also secured in place by locking pins?

  A: The bottoms of the TrekPak Divider Kit for Pelican iM2100 Storm Case and the larger TrekPak divider design are not intended to be secured from the bottom using the locking pins. That being said, the connection points that the pins go into to connect the dividers together do go all the way through the dividers, so you could put pins in the bottoms if you wanted to.

  Q: 4. Would these be able to be modified for a Nanuk 963 case?

  A: You could probably make it work, it would certainly fit in the Nanuk, its an 1" or 2 larger in depth and width.

  Q: 5. What is the included cutter tool for, specifically?

  A: The cutter tool for the TrekPak Divider Kit for Pelican 1605 Air Case can be used to make exact spaces to fit specific pieces of equipment, to cradle them for improved security.

  Q: 6. Will this fit the 1555?

  A: The dimensions of the two cases are quite a bit different. The right Insert for the 1555 is BH# PEDS1555

  Q: 7. I don't need the whole kit, only a pair of dividers strips. Will any of the other Pelican divider strips fit?

  A: Yes, they will fit. Click on the link below to view; https://bhpho.to/2N9zfZ9

  Q: 8. Can I purchase more dividers if needed?

  A: Yes, you can purchase more dividers if needed. TrekPak 1615TP Divider Strip for Pelican 1615 Case BH #TR1615TPDS https://bhpho.to/38q4jSt.

  Q: 9. Will this fit a Nanuk 935 case?

  A: Given that the dimensions of the 2 cases are virtually identical, I would say definitely yes it will fit.

  Q: 10. Is there any assembly required, other than setting top and base foam in place, then Trek Pak insert?

  A: TrekPak Divider Kit for Pelican 1605 Air Case BH #TRPA1605CI uses pre-installed wall sections, divider panels, locking pins and tabs, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. 30 x Pins and Pull Tabs are provided with the divider kit.