The Firefield Agility 1x25 Multi-Dot Sightfrom Firefield Agility 1x25 Multi-Dot Sightis a reflex sight with 1, 3, 5, and 10 MOA multi-dot red-green reticle, five brightness levels, and is free of parallax at 20 yards. It features anti-reflection multicoated optics with 1x magnification, and a 25mm objective diameter. To help you compensate for wind and projectile motion, the sight has 200 MOA windage and elevation adjustment range.

The matte black aluminum housing is weatherproof, nitrogen-purged fogproof, and fits on a Picatinny or Weaver mount. Also included with the sight, is one CR2032 battery, protective objective caps, and a lens cloth.

Multi-Dot Reticle: 1, 3, 5, and 10 MOA    5 Reticle Brightness Levels    Parallax-Free at 20 Yards    1x Magnification / 6.5° AFOV    25mm Objective Diameter    Anti-Reflective Multicoated Optics    200 MOA Windage & Elevation    Fits to Picatinny, Weaver Mount    Nitrogen-Purged Fogproof    Weatherproof Aluminum Housing

1x magnification
• 25mm objective diameter

• 34' @ 100 yd linear field of view

• Anti-reflective multicoated optics
  • 1, 3, 5, and 10 MOA dot reflex reticle
  • Red or green illumination option
  • Five brightness levels
  • Parallax-free at 20 yards
  • 200 MOA windage and elevation adjustment range
  • Runs on included CR2032 battery
  • Secures to Weaver or Picatinny mount
  • Aluminum housing with matte black finish
  • Nitrogen-purged fogproof
  • IPX6-rated weatherproof

  Related Questions and Answers

  Q: 1. Does this have an off and on switch, or does it sleep when covered?

  A: The Barska 1x22 Multi-Reticle Electro Sight Riflescope does not have an on and off switch. All you have to do is turn the dial to zero and that will turn the scope off.

  Q: 2. Will this telrad be able to mount to an orion dob? Or will I need a special adaptor?

  A: The mounting base will mount to anything with a curved surface. It uses 2 strips of double sided tape (pre-attached). Just peel and press. It also has 2 pre drilled holes if you want to secure it with screws. There is a slight issue with it: the mounting surfaces are angled slightly toward each other, to better fit a curved surface. If you try to mount this on a flat surface (using only the tape) not all of the tape will make contact, weakening the joint. With a Dob, screwing it in is your best bet. Just remember to angle your tube down when you do this, to avoid accidentally dropping something on your mirror! Otherwise, this is an awesome finder. I also use the 4 extender to give me a little more headroom. Hope this helps.

  Q: 3. Can a ratchet handle be used to replace the fixed handle?

  A: It cannot you will void the warranty.

  Q: 4. What is the maximum recoil this scope can handle, such as caliber?

  A: I have it on my 91 30 mosin nagant and it's great

  Q: 5. origin?

  A: This item is made in China.

  Q: 6. why aren't there actual sizes listed on a lot of the mouse pads? Including this one - geez I don't care box size!

  A: The dimensions of the MSI AGILITY GD20 are as follows: 320mm(L) x 220mm(W) x 5mm(H).

  Q: 7. Does it co-witness with the iron sights on the Hi-Point 995 carbine?

  A: The BSA Optics 30mm Huntsman should co-witness with the iron sight on your Hi- Point 995 carbine. It has fixed focus, and 1/2 windage and elevation adjustments.

  Q: 8. Will any 50mm sunshade work with this scope?

  A: no you have to get the threads right for each scope

  Q: 9. What is the actual color of the bushnell lettering on this model? Also is the source of the red dot inside in the 4 o'clock position or 6 o'clock position?

  A: Holy cow.... there's a couple of obscure questions. The 'Bushnell' lettering on my red dot is kind of an od green color. I'm just guessing about the 'source' of the illumination, but would say it's from the 4 o'clock position. Hope this helps.

  Q: 10. can you ship to uk?what if so what is total cost

  A: Due to export regulations and/or manufacturers restrictions, we are unable to accept orders with a shipping address in UNITED KINGDOM for this item.