Linksys Gigabit PoE Injector for High Power Devicesprovides Power-over-Ethernet capabilities to a Provider Edge (PE) device and to your non-PoE network. This PoE injector is a reliable power source for Power-over-Ethernet devices, such as wireless access points and IP cameras. This injector offers two Ethernet ports. The Data port transfers data and the Data/PoE port sends data as well as 30W of power to a PoE device that you connect. The injector can power and transfer data up to a distance of 328'.

The PoE injector employs QoS prioritization to prioritize the data sent from different applications and users to ensure this data is sent first. QoS prioritization is especially important for real-time streaming audio and video applications such as VoIP, since these often require a fixed bit rate and are delay sensitive.

The PoE injector is fully compatible with powered devices that comply with the IEEE 802.3af and IEEE 802.3at standards. The PoE injector is housed in a metal chassis, and easily mounts to a wall with the included mounting hardware. A power cable and four foot pads are also included.

For Indoor Use Only    Transfers at Gigabit Ethernet Speeds    5 Gigabit Ethernet Auto-Sensing Ports    1 Data/PoE Port    1 Data Port    Quality of Service (QoS) Prioritization    IEEE 802.at and IEEE 802.af Supported    Access Points and IP Cameras Supported    Up to 328' Range    Up to 30W at 10/100 Mbps via CAT5

Related Questions and Answers

Q: 1. will this power my Ubiquiti UAP-AC-IW ?

A: Yes it Will.

Q: 2. Will this work with the Ubiquiti U6-LR

A: The Ubiquiti Networks POE-24-30W-G-WH PoE Injector (24 VDC, 30W, White) BH #UBPOE2430WGW will not support the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUS which requires higher voltage (DC Input Power - 44 57 VDC Power Consumption - 16.5 W). The Ubiquiti Networks 48V PoE Adapter with Gigabit LAN Port B&H # UBPOE4824WG is recommended.

Q: 3. This Wifi router constantly drops WiFi singal (moderm is OK). Turned it off/on many consecutive times, no WiFi signal. What is the problem and how to fix it?

A: Try to update the firmware of the router that's usually fixes it.

Q: 4. how many devices does it support?

A: Up to 40 devices.

Q: 5. Is this a POE+ (at) compatible unit?

A: This is not POE+, this is 24V.

Q: 6. Hi. I won’t need the power supply if I just need to extend a POE signal. Would I?

A: Yes, you would still need a power supply. We do offer other alternatives if you are looking to just extend POE without power.

Q: 7. Will this work on 2.5GbE links?

A: Yes, the TRENDnet TPE-319GI 10G PoE++ Injector should be backward compatible with 2.5GbE internet speeds.

Q: 8. Is this compatible with the Aputure Amaran F21/22 fixtures?

A: No, the ProLights Male USB-C Connector to USB-C Female Power Injector with Plus DMX In/Out is not compatible with the Aputure Amaran F21/F22.

Q: 9. What is the output voltage? 48V?

A: Delivers up to 30 W of PoE Power.

Q: 10. Which version is this? v1.0R, v2.0R or v2.1R?

A: At the time it was v2.1R, now 2.5 years later it is v2.2R.