Power various devices directly from your car lighter socket with Bescor's Car Lighter Adapter. This is a universal 12V adapter, measuring 10 ft long, that supports any center-positive 12 VDC device that uses a 2.5mm power jack. Supported Bescor LED lights include the LED-1000K, LED-1000KB, LED-1000S, and LED-1000SB.

Power Various Devices Right in Your Car    Supported Bescor Lights: 1000K/KB/S/SB    Supports 12V Devices with 2.5mm Jacks    10 ft Long

Related Questions and Answers

Q: 1. How long is this cable?

A: The Bescor Car Lighter Plug to D-Tap Female Adapter Cable is 3 feet in length.

Q: 2. How long can a BMPCC4K run on this?

A: This is a 98Wh battery, which is around 7 times higher capacity than the LP-E6 batteries the camera normally uses. You should expect to get 5-6 hours out of this battery depending on the shoot conditions and settings you use.

Q: 3. how long does a full charge last?

A: The battery is 98 watt hours. Divide the number of watts you are powering into that to determine the run time.

Q: 4. will this power and fint the 12v connection for the Blackmagic Video Assist 4K?

A: This battery solution can provide 12 volts which the Video Assist 4K can run off. The power plug is unfortunately not compatible with the Video Assist 4K. The Video Assist 4K uses a 2.5mm barrel port and this power cable can be considered to make the connection from the battery to the Video Assist 4k. Bescor XLR Male to 2.5mm Barrel Plug B&H # BEXLRM25PP MFR # XLRM25PP. https://bhpho.to/36GROMH

Q: 5. Hello, I was wondering if this will power a Roland R-88? Many thanks, M

A: This unit will work for it uses the same power connector as the recorder and it can also power FP batteries.

Q: 6. What is the total cable length?

A: The cable is an estimated 6 feet in length

Q: 7. Will this power the GH4 YAGH Interface?

A: The YAGH operates on a nominal 12VDC current. That is what this battery provides. You are good to go.

Q: 8. Will this setup power two items? Like will the battery power one item and the car adapter charge the other? (I have two low-power LED lights I would like to power that would work with this connection).

A: Enter I wish I could give you a good answer but unfortunately when I ordered this product I received the wrong items. The light kit I was going to use this on was pretty lame too so I sent everything back and got an IKAN light kit. You cant use the 12v car adaptor with the IKANs but you can use some rechargeable batteries mounted to the back of the lights. This was a much better option for me and I am looking to get more because they have worked so well.an answer to this question.

Q: 9. Will this power a Sony HVR-S270? I'm not sure if I can use a 12V battery for the 270 or if it has to be a 14.4V.

A: This battery may work with the Sony HVR-S270, however with the output being lower than the camera's needs I would not recommend it. For another solution IndiPRO tools has an inexpensive V-Mount Battery and Charger kit that you can use directly on the camera. This will work and it will be a bit more convenient to set up.

Q: 10. I have 2 of these and one of them is not working correctly. they light on it just stays green when it plug a battery to it. is there something wrong with it?

A: There is nothing wrong .The green light indicates that the battery is fully charged