Iluminar Wlc150-Poe Medium-Range White Light Illuminator

Iluminar Wlc150-poe Medium-range White Light Illuminator

Product Code: eq20559
Availability: In Stock

$747.00 $1,000.98

Qty

1 reviews Write a review

Description
Reviews (1)

The black powder coated Iluminar WLC150-PoE Medium-Range White Light Illuminatorfrom Iluminar WLC150-PoE Medium-Range White Light Illuminatoris designed to provide visible lighting for color network cameras via PoE (Power over Ethernet)-enabled network infrastructure. It employs 12 SMT (Surface Mount Technology) white LEDs that provide illumination up to 132' (40m). This IP66-rated illuminator is vandal-resistant and can be installed both indoors and outdoors. Its die-cast aluminum housing and tempered glass panel provide protection from harsh weather conditions and rapid temperature variations ranging from -40 to 122°F (-40 to 50°C). The illuminator features dual power input (12 VDC or 24 VAC) and automatic light on/off via built-in photocell.

White LEDs
Number of LEDs	12
Type	SMT (Surface Mount Technology) white LEDs
Color Temperature	6000 K
Luminous Flux	1440 lumens
Illumination Angle	30°
Illumination Distance	Up to 132' (40 m)
Electrical
Input Voltage	High Power over Ethernet (PoE+); IEEE.802.3at standard
Power Consumption	24 W
Certifications
Safety	Electrical Safety: EN60598:2004 Laser Eye Safety EN60825-1
IP Rating	IP66 in accordance with EN60529:1992
EMC	EN61000, FCC part 15.107, 15.108 class B
Others	WEEE 202/96/EC, RoHS 202/95/EC
General
Construction	Die-cast aluminum
Front Window	Tempered glass panel
Power Input Connection	IP66 rated RJ45 jack and CAT5e cable
Mount	Stainless steel wall mount adjustable via M6 Allen key (included)
Temperature	-40 to 122°F (-40 to 50°C)
Dimensions	5.4 x 4.4 x 3.5" (13.7 x 11.1 x 8.9 cm)
Weight	2.9 lb (1.3 kg)

Medium-range white light illuminator for color CCTV cameras

Illumination distance up to 132' (40m) and illumination angle of 30°

PoE+ powered (IEEE802.3at compliant)

IP66-rated weatherproof

Automatic light on/off via built-in photocell

Even illumination

Black powder coated stainless steel wall mount

Related Questions and Answers

Q: 1. Is this 32 inches across or 30 Is this 32 inches diameter or 30? It's listed as 32 but the specs show 30 x 30 inch working area.

A: The Westcott Illuminator Collapsible 2-in-1 Silver/White Bounce Reflector (32") is a total 32 inches across. But it has a board so the actual reflective area is 30 inches.

Q: 2. This will supply POE power to cameras located 800 feet away?

A: If you are speaking about the distance from the VHW-HWPS-C4 to the cameras, then we are looking at 100 meters which is the ethernet standard. However, the distance between the VHW-HWPS-B and the VHW-HWPS-C4 is 300 meters.

Q: 3. Any lumens rating for this unit?

A: Unfortunately the manufacturer doesn't have a specification for it

Q: 4. Does this model have PoE?

A: It is designed for Input Voltage 12 to 32 VDC or 24 VAC. Non PoE.

Q: 5. Can this be attached to Aputure 120d bowens mount?

A: This softbox can fit an Aputure C120d with the Photoflex Speed Ring for Bowens, Impact B&H # PHSRBT. https://bhpho.to/2iMEvAZ

Q: 6. Is this compatible with Profoto B1?

A: This softbox is compatible with the Profoto B1 monolight by adding the Photoflex Speed Ring for Profoto B&H # PHSRODPF. https://bhpho.to/2F8ECEG

Q: 7. what size is the battery for the flash light, Can't find it any where?

A: The ATN IR850 Pro Long-Range Infrared Illuminator takes an 18650 Rechargeable Lithium-Ion Battery (3.6V, 3500mAh).

Q: 8. Is this compatible with Bowens mount Godox 600pro?

A: To use this softbox with the Godox AD600 Pro monolight, you must use the Photoflex Speed Ring for Bowens, Impact B&H # PHSRBT. https://bhpho.to/2JnLyBQ

Q: 9. How do I supply 12V to this Iluminar IR919? The document describes the cable as a 6 wire in different colours - There is only 4 wires on the mounted cable!

A: Hello Bo. The Low voltage IR919-2 series unit has 6 wires. The black and red wire are for power. The other wires are not needed unless you want to bypass the photocell. a href= http://iluminarinc.com/images/pdf/iriluminators/IR919-2-Series-v2.0.pdf target= _blank http://iluminarinc.com/images/pdf/iriluminators/IR919-2-Series-v2.0.pdf/aa href= http://iluminarinc.com/images/pdf/Iluminar-installation-instructions-Series-II-v2.pdf target= _blank http://iluminarinc.com/images/pdf/Iluminar-installation-instructions-Series-II-v2.pdf/aIf you have an IR919-PoE-2 model then you will only have 4 wires. The PoE units will have two cables. One for a CAT5 cable. You need a Hi-PoE injector that can power a unit up to 60W. The second cable is for telemetry, which again, is for bypassing the photocell. a href= http://iluminarinc.com/images/pdf/iriluminators/IR919-PoE-2-Series-v1.0.pdf target= _blank http://iluminarinc.com/images/pdf/iriluminators/IR919-PoE-2-Series-v1.0.pdf/aa href= http://iluminarinc.com/images/pdf/Iluminar-PoE-installation-instructions-Series-II-v1.0.pdf target= _blank http://iluminarinc.com/images/pdf/Iluminar-PoE-installation-instructions-Series-II-v1.0.pdf/aRegards,Eddie Reynolds eddier@iluminarinc.com

Q: 10. Is this reflector black on both sides?

A: Yes

PAUL V.	21/06/2024
[2.9 lb (1.3 kg)] I upgraded from the illuminator provided with my scope , to the Supernova. As expected it gave me greater range. The unexpected bonus was the better duration of the battery. With the original, I had to change out batteries during a night's hunt. With this I have not. Finally, I own several ATN products and have found your technical support and customer service to be superb. Sign me a loyal and satisfied customer. 5