Kaiser 26Mm Push-On Lens Cap - Durable Protection

Kaiser 26mm Push-on Lens Cap - Durable Protection

Product Code: eq2056
Availability: In Stock

$33.00 $41.58

Qty

16 reviews Write a review

Description
Reviews (16)

The Kaiser 26mm Push-On Lens Cap - Durable Protectionis designed to fit any camera, enlarger lens, binocular, tele-, micro-, or spotting scope lens. It is for lenses having a front or rear ring with an outside diameter of 26mm. The cap should fit snuggly but not so tight that it is hard to remove.

Designed for 26mm Outer Diameter Push-On Design Protects Front Element of Lens Spare or Replacement Item

Parameters
Type	Front
Size	26 mm
Attachment Method	Slip-On
Packaging Info
Package Weight	0.02 lb
Box Dimensions (LxWxH)	3.2 x 2.75 x 0.5"

Related Questions and Answers

Q: 1. How deep is it? I want something more than 10mm.

A: This cap is about 5.6 mm deep on the inside edge.

Q: 2. Will this work well with the 42mm lens shade for a Pentax 8x42 7.5 monocular?

A: Be sure that the outside diameter of the shade is 42mm. A typical 42mm filter is larger than 42mm at the outside diameter. I have B&W filters, and they are 2mm larger than the thread size. So if I need a cap for a 50mm filter, the cap has to be 52mm. I would recommend you measure the shade to be absolutely sure.

Q: 3. Is the inside diameter dimension of this cap exactly 100mm?

A: I shrunk this lens cap in the oven to about 97mm to fit my Tiffen ND Filter nice and snuggly. Put it on wax paper and pop it in the oven at about 140 degrees C monitor it closely. Took about 10mins to shrink it! Stay close to the oven and make sure tou dont melt it though!

Q: 4. What is the diameter of the inside of the raised rim that slips onto the lens?

A: This Push-On Lens Cap fits on to 72mm diameter lenses.

Q: 5. Would this fit a 25 mm 0.95 Voightlander lense

A: If you are referring to the Voigtlander Nokton 25mm f/0.95 Type II Lens for Micro Four Thirds B&H # VO25095M43 MFR # BA259M2 that lens uses a 52mm lens cap.And this is one of many 52mm lens caps Sensei 52mm Center Pinch Snap-On Lens Cap B&H # SELC52 MFR # LC-52.

Q: 6. Will this fit on a Nikon 50mm lens?

A: No, 50mm is the focal length and not the outer dimension of the front of the lens. You will need to measure the outer diameter of the front of your lens to determine a push on cap size.

Q: 7. Is the inside diameter of the cap 48mm?Thanks,Dave

A: Yes, the inside diameter of the Kaiser 48mm Push-On Lens Cap is 48mm. However, do note that it is often recommended to purchase push-on lens caps 1-2mm larger than the diameter of the item upon which it is to be placed. Getting a size exactly the same size as your item would not fit.

Q: 8. Does it fit on Heliopan 62mm Variable ND filter?

A: If your ND filter have the female thread to receive it, it will work. This one have no female thread, only the male one, so it must be the the last one to be mounted.

Q: 9. Will this fit a pentagon 50 mm 1.8 mc lens?

A: The front diameter of your lens is 60mm, so the Kaiser 60mm Push-On Lens Cap, BH # KALC60 would be more suitable. https://bhpho.to/3nzuMlU

Q: 10. Is 43mm the inside diameter of this cap?

A: Yes. Sizes are inside diameter of the cap

Louis	08/09/2024
[0.02 lb] Whenever I buy a new lens I replace the pinch cap with the slip on cap I like them much better. They do not break give better protection and old school which I like 5

Michael	24/08/2024
[0.02 lb] Used on 46mm B&W filters replacing clip-on style lens caps. Much easier to deal with. 5

anyonymous	05/08/2024
[26 mm] I was told by other retailers that finding a lens cap for my camera would be impossible and the only way to obtain one would be to find it on .... Knowing the outer diameter of the lens barrel, and hoping I got it right, I ordered this item and it fits perfectly! Since it's a push on type lens cap, it's easy to remove with a quick flip of the thumb, no need to unscrew anything as with the original one. 5

Robert	27/07/2024
[0.02 lb] Lost lens caps for older Swift binoculars, Japanese made. I carefully measured the outside of the barrels with a accurate micrometer and ordered. The new caps fit perfectly and the 48mm has a little tab or ear that allows a tether to slip through. The smaller cap has no tab, so I used a stick on lens keeper, all from B&H. Very happy. The cap material is just slightly flexible, so is not brittle. There is a slightly raised rib around the outer edge that makes the caps easy to pull off. 5

Daryl	06/07/2024
[Front] In general I prefer these Kaiser caps over pinch caps, they add protection to the side and don't spring off. They fit filters and need to be 2mm larger than the filter diameter. They fit B+W 60mm filters well. If you get one that is slightly loose then add a bit of tape to the internal and custom fit it. These Kaiser caps are made well enough to last many years, I have similar caps that are 40+ years, they take a beating. Easily fit into a pocket. 5

Mike	03/07/2024
[Front] Fit is very snug which means it won’t come off when stuffed into a bag or case. Hope I never loose it. Looked for this a long time. 5

Allen	04/06/2024
[26 mm] The cap arrived today, 5 days earlier than originally stated. All is good. Perfect fit and in a reasonable time period. Thank you. 5

Fred	23/05/2024
[Slip-On] This fits well and covers the retractable lens without coming off. It protects the lens leaves which cover the glass and eliminates dirt or dust getting in collecting on the retract mechanism. Doesn't remove paint from gripping the control ring. Sized just right. 5

anyonymous	22/05/2024
[Front] This is the right size and fits well. 5

Harvey	03/05/2024
[Front] Perfect for the Canon G7xii. Aside from protecting the blades, it also doubles as a way to prevent the lens from having dust infiltrate into the lens barrel and the sensor. 5