Bosch Mic Hinged Dca Mount

Bosch Mic Hinged Dca Mount - Black

Product Code: eq20764
Availability: In Stock

$428.85 $638.99

Qty

14 reviews Write a review

Description
Reviews (14)

The black Bosch MIC Hinged DCA Mount - Blackis designed for MIC7000 & MIC IP fusion 9000i cameras. This mount enables the camera to be temporarily hung during installation for easier connection of cables/wiring. The mount is made from aluminum and comes with a sand finish. It has two M25 holes for conduit/cable glands. Included in the mounting hardware is an O-ring that seals the camera and mount interface to deliver an IP68 rating for water protection.

Hinged Mount for MIC7000 & MIC IP fusion 9000i Cameras

Parameters
Cable Routing	2x Opening with M25 Thread
Color	Black
General
Materials	Aluminum, Polyester
Dimensions	5.18 x 4.7" / 131.6 x 120 mm
Weight	5.5 lb / 2.5 kg
Packaging Info
Package Weight	6.1 lb
Box Dimensions (LxWxH)	8 x 7.3 x 7.2"

Related Questions and Answers

Q: 1. Hows the connection between the NVR to the display i.e the inputs and the output of the VIDEOJET decoder 3000?

A: The connection between this encoder and the display is HDMI, or composite BNC output.

Q: 2. Can this be used with the RED/Small HD DMC3 monitor on Komodo X? It will fit but does monitor have to connect to pins on cam top

A: Yes, the GLOBAL DYNAMICS UNITED Hinged KOMODO Monitor Mount would support the komodo-X, and allow you to mount a SmallHD brand display.

Q: 3. Is this compatible with SmallHD 702 for komodo?

A: The Global dynamics model shows it works with 5" displays. However, yes it will work with the SmallHD 702. Another good choice is this SmallRig model. https://bhpho.to/3EhOJEd

Q: 4. Hi. Am I right this one does not have the rear wall? Is there an optional real wall? Thank you.

A: You are correct. The APC NetShelter WX 9U Wall Mount Cabinet does not have a rear wall. It is designed to mount flush against your wall. With this design, any cables routed from inside of you wall can easily attach to the equipment mounted inside of the cabinet.

Q: 5. Is this Compatible with the outrigger Handle?

A: Yes, in the description it clarifies that the KOMODO Monitor Mount can be used while the RED OUTRIGGER handle is attached to your camera.

Q: 6. Can this be used with a small DSLR such as Sigma Fp to get an overhead shot by mounting to the ceiling?

A: Yes, the 1/4 20 screw connection on the Bosch TC9208 Indoor Camera Mount could connect to smaller cameras, and the mount could connect to a wall or Ceiling for installation. Drop ceiling version: ALZO Suspended Drop Ceiling Video Pico Mini Projector Mount BH #AL1238 • MFR #1238

Q: 7. Is this compatible with RED's DSMC2 Line?

A: No, this is only compatible with the RED Komodo.

Q: 8. is this compatible with the Andyince Cage for the Atomos Shinobi?

A: Yes, the GLOBAL DYNAMICS UNITED K-MT-M will attach to the Andycine Cage for Atomos Shinobi.

Q: 9. If my system is running on a Bosch DIVAR IP 7000 that is 128 channel in total,can the VIDEOJET decoder 3000 display all the cameras or only 1 channel as indicated being one of the feature of the VIDEOJET decoder 3000?

A: This unit can do a quad view if you have standard definition cameras. If you are using HD cameras then you can only see 1 camera using this device.

Q: 10. Can this support the Atomos Shogun 7?

A: The GLOBAL DYNAMICS UNITED Hinged KOMODO Monitor Mount is designed for SmallHD 5 and Portkeys BM5 monitors.

Brent	29/09/2024
[8 x 7.3 x 7.2"] This is a very good mount that fits easily atop my Komodo. It rotates well and remains stable. 5

Richard	25/09/2024
[Black] Well-built and surprisingly bright for a short range illuminator. My only gripe is the user manual I received, it came in every language except English. I would have preferred more technical information about optimum placement and more intelligible graphs for the various diffusers. Even so, not a big issue. A couple minutes of trial and error and you'll have the neighborhood lit up nicely. Definitely recommend. 5

Alex	21/08/2024
[Black] After using Smallrig and Tilta hinges for the Atomos Ninja V on my FX3, I was pleasantly surprised as just how sturdy this little piece of metal is! It bolts on well, stays solid and allows you to tilt the monitor and keep it where you want it. hinge won't come loose like the others! 5

Chris	09/08/2024
[6.1 lb] Bought 2 after other cheaper illuminators were low-light. THey run off a 12 V 7AH battery and the beam means they illuminate objects within 50 ft or more! 5

anyonymous	29/07/2024
[8 x 7.3 x 7.2"] Very east to use and hook up. 5

Nourished	09/07/2024
[Black] I called B&H customer service and told them what I was looking for and they searched for this item and recommended two - both of which were within my budget. GREAT customer service!!! 5

Fausto	01/07/2024
[6.1 lb] I am using this bracket as a replacement for the one that came on the package with the Brinno lapse time camera. It is well built and easy to set up. Perform as well as the most expensive, with same characteristics. 5

Aik Fong	03/06/2024
[8 x 7.3 x 7.2"] Very Good Products & Fast Delivery. 5

John M.	01/06/2024
[8 x 7.3 x 7.2"] We bought this cabinet to house a video security system since we didn't have time to build the cabinet ourselves.� We were very pleasantly surprised at the quality of the housing and the smart engineering that allowed for ease of wall mounting and set up.� We will definitely use this product again. 5