The DPA AHM6000-S is a lightweight, low-profile headband that supports the DPA 4066, 4067, and 4088 miniature microphones. The adjustable headband provides hands-free, comfortable operation while remaining unobtrusive.

Weighing only 4 grams, you won't get weighed down by this easy-to adjust headband

Related Questions and Answers

Q: 1. Would this work on the Sennheiser ME2?

A: Hi Timm,I believe it will work, although our official recommendation based on testing is the following:a href= http://mymic.rycote.com/products/lavalier-solutions/lavalier-windjammer/black-lavalier-windjammer/ target= _blank http://mymic.rycote.com/products/lavalier-solutions/lavalier-windjammer/black-lavalier-windjammer//aThere is a slight difference in capsule diameter and length, but the 4080 Mini WJ should cover everything as intended. Please note that you probably won't be able to use the supplied clip with the ME 2 if you use this solution.

Q: 2. How would I use this microphone with a GoPro Hero5? I would like to keep it as simple as possible.

A: This DPA 4060 has a locking 3.5mm connector and it also requires 5 to 10V of plug-in power so I would not recommend it for use with the GoPro Hero5. The 4060 is really designed for use with a wireless transmitter, not for direct connection to a camera. Additionally, the 3.5mm GoPro mic adapter has a standard non-locking input so the mic will not be connected securely and it is very likely that the mic may require more voltage than the camera can supply. You definitely can use the DPA 4060 with a wireless mic system such as the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System - A: 516 to 558 MHz (B&H # SEEW112PG4A) -- you can choose the frequency band. The wireless transmitter will supply the proper voltage for the mic and the wireless receiver will connect to the GoPro Pro 3.5mm Mic Adapter (B&H # GO35MA) without any problems. We also have other wireless mic systems that use the same type of locking connector and wiring as Sennheiser which would be compatible with with the 4060 mic. We can also help you to select a different mic if you do prefer to use a wired mic with the Hero5. Please contact us by phone or through live chat on the website for further assistance.

Q: 3. Is this the exact replacement cable for the DPA 6066, beige, service connector from the mic boom to wired TA4F?

A: This DPA Microphones Microphone Cable is designed for the DPA D:Fine headset microphone with an S2 connection. It is not intended for the DPA 6066.

Q: 4. Can this be positioned upside down? As in clamped to a shelf overhead?

A: Yes you can clamp the Mount-It! Adjustable Microphone Boom Arm in an upside down position if needed.

Q: 5. How's this mic function with the Sennheiser G4 system?

A: This mic does not include a connector for any wireless system directly. To make this work with a Sennheiser G4 system, you will need to purchase the DPA Microdot connector for a Sennheiser system BH #DPDAD6034.

Q: 6. hello, 3 pin lemo is compatible with shure bodypack?

A: Shure uses a TA4 connector for body packs.

Q: 7. Hi, DPA only sells a Microdot to XLR adapter. What adapter would be compatible with this TA4F connector? I read on the DAD6001-BC XLR adapter Review page that the adapter is designed to work with the DPA Micro dot only, so I'm assuming the reverse would be true regarding the TA4F. thank you.

A: DPA Microphones DAD6010 Microdot to TA4F Adapter B&H # DPDAD6010 MFR # DAD6010 https://bhpho.to/3z49hfD Adapts DPA Mic to Wireless Transmitter For Shure Transmitters with TA4M Also for Line 6 XD-V70L & TOA WM4300 Microdot to TA4F Switchcraft Connection

Q: 8. What adapter to get this TA4F to MXLR?

A: This mic is specifically wired for wireless transmitter that uses a TA4 connection, and provides plug- in power at about 5 volts. In order to connect it to a XLR, you would also need an adapter that can convert plug in power to accept 48-volt phantom power from an XLR source. Voice Technologies VT1126 48V Phantom Power Adapter for Wireless Lavalier Microphones (TA4 to XLR), BH #VOVT0137 would be an appropriate adapter for this purpose.

Q: 9. Could work with Sony EWP D SERIES ?

A: Yes. The DPA Microphones 4060-OC-C-C00 CORE Normal-Sensitivity Omni Lavalier Microphone has a Microdot connector which can be used with an adapter to enable compatibility with Sony UWP-D series transmitters. For example, you can use the DPA Microphones DAD6019 MicroDot to 1/8" Mini Connector for Sony (B&H # DPDAD6019).

Q: 10. Does this mic plug into amp and work straight away?

A: It is a hard wired Headset that will plug directly into Anchor speaker with 1/4 inch Mic Jack. Should also work with any other 1/4 inch powered Amp with 1/4 inch mic jack