Skb Iseries Waterproof Flight Case

Product Code: eq20919
Availability: In Stock

$1,049.97 $1,364.96

Qty

15 reviews Write a review

Description
Reviews (15)

The SKB iSeries Waterproof Flight Casefrom SKB iSeries Waterproof Flight Caseis designed to accommodate most SG-style guitars. The case's interior is plush-lined and injection-molded for neck and body support. Constructed of polypropylene copolymer resin, the case's exterior features a gasketed, waterproof, IP67 submersible design. It is also resistant to corrosion and impact damage.

The stainless-steel, molded-in hinge and patented trigger-release latch system is compatible with TSA locks. You'll also find four reinforced locking loops for your own supplied locks. The snap-down rubber over-molded grip handle and quiet-glide wheels are designed for easy transport. Its automatic ambient pressure-equalization valve is designed to miltary specs (MIL-STD-648C).

For SG-Style Guitars Dustproof, Waterproof & Impact-Resistant Polypropylene Copolymer Resin Shell Plush-Lined, Injection-Molded Interior Mil-Spec Pressure-Equalization Valve Over-Molded Grip Handle and Wheels

Parameters
Dimensions	Exterior L x W x D: 45 x 17 x 6.3" / 114.2 x 43.1 x 16.1 cm Interior Length: 40.5" / 102.9 cm Maximum Body L x D: 17 x 2.3" / 43.2 x 5.7 cm Instrument Lower Bout: 13.3" / 33.7 cm Instrument Upper Bout: 11" / 27.9 cm
Weight	19 lb / 8.6 kg
Packaging Info
Package Weight	20 lb
Box Dimensions (LxWxH)	46 x 17 x 7"

Made from polypropylene copolymer resin

UV, solvent, corrosion, and fungus resistant (based on results from test MIL-STD-810F)

Watertight gasket seal (based on results from test MIL-STD-C-4150J)

Automatic ambient pressure-equalization valve (based on results from tests MIL-STD-648C and IP67)

Resistant to corrosion and impact damage

Stainless-steel molded-in hinges

TSA approved trigger-release locking latch system with reinforced loops for customer supplied locks

Quiet-glide wheels

Rubber over-molded carrying handle and pull handle

Accessory compartment

Full neck support

Related Questions and Answers

Q: 1. Will this work with the Ten Point Stealth 450 with the Oracle X scope. It looks like it will but I just want to be sure.

A: The SKB iSeries 3613-12 Ultimate Waterproof Crossbow Case will not fit the Ten Point Stealth 450.

Q: 2. Will this fit Sony UWP-D26 kits?

A: BH #SK3I12083BH1 is better suited for the components in the UWP-D26 system. https://www.bhphotovideo.com/c/product/1524558-REG/skb_3i1208_3_bh1_iseries_waterproof_sony_uwpii.html

Q: 3. How much room does the think tank liner take up? Would the Matthews Dutti Dolly fit?

A: This has interior dimensions of 24.1 x 21 x 7". The Dutti Dolly is 20 x 24 x 3.5" / 50.8 x 60.96 x 8.89 cm (To Top of Wheel Guards). It will be a tight fit, but it should work.

Q: 4. Will this case fit the TenPoint RS440 with the Garmin Xero range finding scope?

A: The SKB iSeries 3613-12 Ultimate Waterproof Crossbow Case is not compatible with the TenPoint RS440.

Q: 5. will this work for ew100 series ? or is there something similar for 2 ew100 g4 ?

A: This will work well for your systems, and you will have some extra compartments for accessories.

Q: 6. Will this fit Sennheiser packs with the cold shoe plate on the bottoms in at least two of the cut outs?

A: Yes, it will fit 2 kits with coldshoe mounted

Q: 7. Will this work on R9 thru R29 ?

A: Hello John Unfortunately, No please see below... 3i-3613-BXB - for Ravin R9, R10, R15, R20, Tenpoint Stealth NXT, and Shadow NXT 3i301610B-R2 - for Ravin R26 and R29 3i-3613-BTN - for Nitro X, Nitro XTR, and Nitro RDX

Q: 8. Does the foam come pre-cut to fit the Zoom or can we cut it? The photo looks like it's the H4N and I have the H6N (slightly different form factor).

A: The foam in the SKB Custom Fit iSeries Waterproof Case for Zoom H4N comes pre-cut for the H4N recorder. Using this with the Zoom H6 would require a bit more foam to be cut out/removed.

Q: 9. 1. Will my Cort accoustic guitar fit in this case?2. From order time, when will my case arrive to my home in Hastings-on-hudson, NY?

A: The SKB Flight Case is specifically molded to fit SG style electric guitars. The interior depth will not support a body depth over 2.3 .

Q: 10. can this hold the hero 9?

A: The SKB iSeries 1309-6 Waterproof Dual-Layer Case for 4 GoPro Cameras case is meant to work with GoPro Hero 4 and earlier cameras. This will not fit the Hero 9 camera as they differ in size.

NCvideoguy	26/09/2024
[46 x 17 x 7"] Already pre cut inserts and ready to roll with my new camera and accessories. Love these cases. 5

shaunh14	13/09/2024
[20 lb] [This review was collected as part of a promotion.] This case is perfect for the extra broad heads you have laying around. Especially if you throw them into your hunting bag. This keeps them all secured in case one place and there’s no more snagging on your bags! 5

anyonymous	13/09/2024
[19 lb / 8.6 kg] It does what it is supposed to do. This case hold my three sennheiser handheld mics (two of the G3 with the fin on the bottom and one G2). It also holds my three beltpack transmitters and my single beltpack receiver. There are two areas for wires. One holds my 2 lav mics and the other holds misc wires (1/8 to 1/8 for wireless connectivity from a laptop, xlr to 1/8 to go from mixer into transmitter, and 1/8 to xlr to go from wireless receiver into speakers. While this is not designed specifically for the sennehsier mics, they all fit and are protected. My 4 sennheiser receivers are rack mounted in another case. You will not be able to fit the 1/2 receivers in this case. 5

Troy	06/09/2024
[46 x 17 x 7"] The foam is tough. Mics drop right in and are easily retrieved. The box is super sturdy and made in the USA, baby! 5

humbertom1	05/09/2024
[46 x 17 x 7"] [This review was collected as part of a promotion.] Great small box ideal for arrowhead transportation hard and resistant. You can use this for many different transportation options and carry other items too and safe waterproof I recommend if you like the outdoor life or hunting experience for only a few but its very safety I recommend this case! 5

John	05/09/2024
[46 x 17 x 7"] I am a professional musician and regularly travel with my instruments. I own other cases from SKB, but when checking my electric guitar on planes, I've been using a traditional ATA Anvil-style case, which is very heavy but provides great protection. I've heard good things about the iSeries flight cases and decided to use one for a recent tour. The case is a bit heavier than a standard SKB molded case, but MUCH lighter than my old ATA case. It is ATA approved, and holds up to baggage handling. This is now my favorite travel case for my main instrument. It's saving me money on every flight by being lightweight, and is much less cumbersome to carry. There are even a pair of handy wheels on one end to make it convenient to roll, but it's perfectly manageable as a hand-carry item. 5

anyonymous	22/08/2024
[20 lb] [This review was collected as part of a promotion.] Great case! Could be used for a lot of things if you make changes to the foam insert but it is great for housing broad heads. The only way to make it better would be to make one that would seal around an arrow so they could be stored together like a quiver. 5

anyonymous	21/08/2024
[20 lb] Just what I wanted 5

Dave	22/07/2024
[19 lb / 8.6 kg] This case is exactly what I wanted to make sure my bass will never suffer from outside influences when on the move. Sturdy is an understatement. Cradled in the lap of luxury surrounded by the best materials available. Latches that don't quit and it's TSA approved for travel on airlines. Who could ask for more! 5

Mark	17/07/2024
[20 lb] I use this product to house my Zoom H6 recorder and accessories. I find the pre-cut sections to be tight, but very protective, which is what I want. So far, no moisture inside the case. I would definitely recommend this case to anyone. 5