The 1SKB-56 Gibson Les Paul Guitar Case from SKB is designed to fit most Gibson Les Paul guitars. The arch top design offers full neck support and the EPS foam interior keeps the guitar from slipping during transport. The case's exterior features molded-in bumpers, valance support and 2 injection-molded feet. SKB's patented fiberglass reinforces the nylon trigger-release latches which are recognized and accepted by the TSA.

Neck support

EPS foam interior

Accessories compartment

Injection-molded feet located on neck and body of case

Bumper-protected valance

Cushioned rubber over-molded handle

Fiberglass reinforced nylon trigger-release latching system

TSA recognized and accepted locks

Related Questions and Answers

Q: 1. Will this fit a 12 fret 000 guitar? They are a different size than the 14 fret.

A: The SKB SKB-000 is not designed to house a 12 fret model and would not be recommended.

Q: 2. Hi there I have a Washburn wj7sceatbm-o electric acoustic it's a jumbo just wanting to no if you may no if it fits the case is universal so by definition it should fit just about ne jumbo guitar?

A: Washburn does not list the dimensions of the WJ7SCEATBM-O with the specifications for this instrument. The best way to confirm whether the case will fit is to measure the guitar and compare the measurements with the interior dimensions of the case. Use a tape measure and measure the length across the top of the guitar's body at the widest point of its lower bout and also at the widest point of its upper bout. Also, measure the depth of the guitar's body (thickness from front to back) at its widest point, and the total length of the guitar from the top of the headstock to the endpin. Please feel free to contact us through live chat on the website or by phone if you would like further assistance. As long as you can provide the dimensions of the guitar, we can check on whether it will fit inside this SKB case. It is "universal" but it is always best to compare dimensions of the instrument and case. Here are the maximum dimensions for guitar sizes that the case will accommodate: Body Length: 21.5" (546 mm) Body Depth: 5.63" (143 mm) Lower Bout: 17.25" (438.2 mm) Upper Bout: 12.5" (317.5 mm)

Q: 3. How dense and durable is the foam insert for the SKB 3I-20118LENS case? Will it holds its shape over time?

A: Hi David, Thank you for your interest in our cases. The foam uses a fine-cell formulation and is dense. The specific type of foam used in the base of the case is called Synergy 1000. It will hold up for 20 years or longer. It will hold it's shape over time without issue unless you put an item in with a lot of pressure in the pocket and then it will open up the pocket a little. You're welcome to contact our customer service department if you would like a technical sheet on the foam breakdown.Thank you,Will

Q: 4. Would this case work for the Sony Cine Alta 4K Primes?

A: Yes, you can fit all the Sony Cine Alta 4K primes within the case but the 135mm is looking to make it a tight fit. The length of the lenses is as follows - 20/25 mm: 137 mm (5 1/2 inches), 35/50/85 mm: 135.5 mm (5 3/8 inches), 135 mm: 160 mm (6 3/8 inches). The external diameter of the Sony lenses is 118 mm (4 3/4 inches). This SKB case has for its lens slots a diameter of 125mm and a base depth of 120mm. The useable lid depth is 35mm yield a maximum length of 155mm per lens.

Q: 5. Do the Rokinon Xeen fit?

A: Xeen's fit, but not well. The 16mm is a good fit, but the other lenses are taller than the holes, so about an inch of the lens hangs out. The case can still close, but it's tight. I bought this case specifically for my Xeen's and will be returning it because it's not a correct fit.

Q: 6. Maximum Length on Tokina Vista EF are 14.5cm / 145mm. I've been told they won't fit but it appears that they fit the specs. Has anyone used these for either the ATX or Vistas?

A: No this will Not support the tokina Vista primes. you'll need a case made to accommodate the depth and width of those lenses

Q: 7. How well does thius fit the Mackie DL-1608? Looks like it will work fine...

A: The case has Custom-cut PE foam to fit the QSC TouchMix-8. It has a removable foam section to fit the TouchMix-16. I would advise getting a case that was designed for the Mackie as well.

Q: 8. Where can I find front and rear recessed steel twist latches mechanism? we bought two of these 12U cases in April 2021. Each cover latches are not holding to main case keeper anymore. They just come loose when in transport or move between building. So frustrating. Thanks

A: I would recommend contacting customer support at SKB and making them aware of the issue with the latches not holding the covers securely. The case is still under warranty. SKB does have replacement parts and may be able to offer an option for a different type latch, possibly with a lock to prevent the covers from becoming loose during transport. As an additional option for extra security, you may want to use a strap or bungee cord wrapped around the exterior and running through the side handles. You can reach SKB by phone at 800-410-2024 or by email at customerservice@skbcases.com. Here is a link to view SKB's warranty information: http://store.skbcases.com/warranty-information/

Q: 9. Will these spaces fit Cooke Panchri i/Classic prime lenses?

A: Most of the lenses will fit but a few of them are too long/tall. (for instance the 65mm Macro).

Q: 10. is it also water resist?

A: The canvas bag is fairly heavy duty ... so it could with stand a little bit of moisture ... i.e. walking from vehicle to building in rain ... but I certainly wouldn't leave it anywhere it could get wet for any length of time since it stores electronics. It is not coated or treated for water resistance.