The 24” 3RR-5U24-25B 5U Removable Shock Rack and Transport Case from SKB is lightweight, shockproof, watertight, dustproof, heat, and chemical resistant, suitable for protecting and transporting your sensitive electronic equipment. The interior of the case features a removable rack with a positive lock latching system that slides open like a file drawer, allowing full access to racked equipment.

Molded of LMDP (Linear Medium Density Polyethylene) plastic that meets or exceeds MIL-STD 810G standards, this case includes 8 elastomeric shock absorbers which allow a standard payload range of 40 to 150lb. An extended payload range (sold separately) of 160 to 300lb can be accommodated as a special order option, or field installed to a standard case by the customer.

This 3RR Removable Rack is 24” deep from rail to rail with a standard 19” rack width per ANSI/EIA-310-C specification and features square-hole rack rails to accommodate either #10-32 US standard, or 6mm international standard cage nuts, which are supplied with the case.

The rugged roto-molded shell ensures industry leading strength and impact resistance. The standard COTS (Commercial off the Shelf) case comes with a 2” deep front lid and a 5” deep rear lid to accommodate rack gear that is longer than 24”, and edge casters to allow convenient case transport. Molded-in stacking ribs and lugs are designed to stack with competitive manufacturers’ cases. Black powder coated stainless steel hardware is recessed for protection, as well as 8 comfort grip spring loaded lift handles allow for easy movement. An automatic pressure relief valve along with gasket sealed lids is included with convenient lid hangers to store your lids when your equipment is in operation. Besides, the included coupling straps secure the racks together when stacked. The interior rack is also completely removable, allowing complete frame access for bench integration.

Completely removable frame for access to bench integration

Meets or exceeds MIL-STD 810G

Standard payload range 40 to 150lb

Standard 19" rack width per ANSI/EIA-310-C

Standard rack depth 24" rail to rail

Square hold rack rails to accommodate either #10-32 US standard, or 6mm international standard cage nuts

2" front lid and 5" rear lid with edge casters standard, other options sold separately

Rugged roto-molded shell ensures industry leading strength and impact resistance

Molded in stacking ribs and lugs are designed to stack with competitive manufacturers' cases

Black powder coated stainless steel hardware (standard) which are recessed for protection

8 comfort grip spring-loaded lift handles

Automatic pressure relief valve (standard)

Lid hangers (standard)

Case coupling straps (standard)

Available in black, desert tan, or OD green finish

Related Questions and Answers

Q: 1. would this work with the cloudlifter cl-4?

A: Yes, the Cloudlifter CL-4 will fit in the SKB 2U Roto Rack Case. The CL-4 takes up one rack space.

Q: 2. does it include any screws?

A: Screws are not included. One may consider purchasing Raxxess # RAPTSW25.

Q: 3. Will the Apple Pro XDR display fit in this case?

A: This cases was not specifically designed for the Apple Pro Display. But it would still fit inside the case

Q: 4. is it also water resist?

A: The canvas bag is fairly heavy duty ... so it could with stand a little bit of moisture ... i.e. walking from vehicle to building in rain ... but I certainly wouldn't leave it anywhere it could get wet for any length of time since it stores electronics. It is not coated or treated for water resistance.

Q: 5. Will this fit on top of SKB Roto Molded Rack Expansion Case with Wheels (B&H #SKR1906 MFR #1SKB-R1906)?

A: The SKB Roto 1SKB-R1906 was designed to add expandability to the 1SKB-R102, 1SKB-R104, 1SKB-R106 and 1SKB19-R1208 as well as the 1SKB19-R1006(V) and the 1SKB19-R1010(V) only. It is not compatible with the SKB 8U Roto Rack Rack Case. By the way, there is an wheeled version of the this case; B&H# SKR8W.

Q: 6. Will this fit the standard 19" rack mount equipment?

A: Yes, the SKB 8U Roto Rolling Rack Case can be used with standard 19" rackmount equipment.

Q: 7. I'm considering this case for a Dell 24 computer monitor (P2415Q). Will it accommodate the attached stand and base?

A: Yes, it should not be a problem. We use it for a Lenova All-In-One 23 inch PC which has a stand with a wider base than the Dell monitor and it fits fine. Plenty of room for accessories also. The interior foam allows for a great deal of individualization.

Q: 8. Can I return the item for a full refund if it doesn't fit the monitor we have?

A: Should you be dissatisfied with an order, you have 30 days from date of purchase to make a return with all of the original materials included. Full details on our return policy can be found at the following link: http://bhpho.to/19fUBwL

Q: 9. Since any airlines list 22x14x9 as the max size for carry on is this guaranteed to be allowed to be carried on the plane?

A: Hello Mark Yes, the Model: 1SKB-iSF2U is is Guaranteed to be Carry-On size.

Q: 10. Does the measurement go from front mount to rear? Is there a little bit of room for my 4U rack to mount in front and stick out an inch or two in the back? Thanks

A: The total depth available on the SKB 4U Roto Rack Case rack (without front and back covers) is 17.6 . Whether or not your equipment would fit will depend on whether or not the piece of gear in question exceeds this dimension.