Skb Iseries 2617-12 Waterproof Case

Product Code: eq21020
Availability: In Stock

$824.97 $1,154.96

Qty

6 reviews Write a review

Description
Reviews (6)

This SKB iSeries 2617-12 Waterproof Casefrom SKB iSeries 2617-12 Waterproof Caseis a pro audio utility case measuring 26" Long x 17" Wide x 12" Deep with a layered cubed foam interior for customization to your gear. It is molded of high-strength polypropylene copolymer resin, and features a gasketed, water and dust tight, submersible design (IP67). It is also resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) assists with moisture control. This model has no interior padding.

This pro audio utility case also features protected hinges with stainless steel pins to provide stability to the lid and SKB's "trigger release" latching system that is adaptable for TSA recognized and accepted locks. A double grip carrying handle helps balancing heavy loads, and the snap-down rubber over-molded cushion grip handles on each end assist two-person carry. An industrial strength injection molded pull handle and wide set double wheels offer a comfortable transport option.

Watertight, Dustproof Case Made of High-Strength Polypropylene Protected Hinges & Stainless Steel Pins Five Trigger Release Latches Adaptable for TSA Locks Rubber Over-Molded Cushion Grip Handles Double Grip Carrying Handle Pull Handle & Easy Glide Wheels

Key Specs
Color	Black
Carry/Transport Options	Handle, Retractable Handle, Wheels (Built-In) • Number of Wheels: 2
Type of Closure	Latch
Interior Type	Empty
Water Resistance	Waterproof
Dimensions	Exterior 28.63 x 20.25 x 13.5" / 72.72 x 51.44 x 34.3 cm Interior 26 x 17.5 x 11.88" / 66 x 44.5 x 30.18 cm
Weight	20.88 lb / 9.47 kg
Parameters
Carry/Transport Options	Handle, Retractable Handle, Wheels (Built-In) • Number of Wheels: 2
Type of Closure	Latch
Interior Type	Empty
Features
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof
Certifications	MIL-STD810H
Padded Interior	No
Materials	Exterior: Polypropylene
Dimensions	Exterior 28.63 x 20.25 x 13.5" / 72.72 x 51.44 x 34.3 cm Interior 26 x 17.5 x 11.88" / 66 x 44.5 x 30.18 cm
Weight	20.88 lb / 9.47 kg
Packaging Info
Package Weight	23.2 lb
Box Dimensions (LxWxH)	30 x 20 x 14"

Built-in pull handle and wide set double wheels

High-strength polypropylene copolymer resin

UV, solvent, corrosion and fungus resistant (MIL-STD-810F)

Gasket seal makes the case watertight (MIL-STD-C-4150J)

Automatic ambient pressure equalization value (MIL-STD-648C & IP67)

Resistant to corrosion and impact damage

Protected hinges with stainless steel pins

Five patented "trigger release" Latches

Adaptable for TSA locks

Oversized rubber over-molded cushion grip handle for a balanced load

Carrying handles on each end

Related Questions and Answers

Q: 1. Is it exactly 36" only at the top? I see it tapers down. I have a 37" item that's 3" deep, and wonder if it fits at the top?

A: Unfortunately, a 37 inch item will not fit in the SKB iSeries 3613-12 Waterproof Wheeled Utility Case (Empty). Also the top is just 2 inches deep.

Q: 2. Will it work on TenPoint Vapor RS470 Crossbow Package with Garmin Xero X1i Rangefinding Scope?

A: No, the SKB iSeries 3613-12 Ultimate Waterproof Crossbow Case (Black) will not the TenPoint Vapor RS470 Crossbow with the Xero X1i Crossbow Scope. For that setup go with the SKB iSeries TenPoint Vapor RS470 Crossbow Case which will fit everything comfortably, BH #SK3I3913VAP (https://bhpho.to/3PUDjuv).

Q: 3. Will a Sony 400mm 2.8 fit inside?

A: Hello Douglas Yes. a Sony 400mm 2.8 will fit inside the 3i-2617-12 case. Just an FYI, sometimes some camera lens hoods might be slightly big which might could cause it not to fit.

Q: 4. Will a 600D fit in here with additional space for a smaller light, plus stands & accessories?

A: The SKB iSeries 3613-12 Case with Think Tank Lighting/Stand Dividers & Lid Foam (Black) has enough room to carry an Aputure 600d light fixture, plus stands, accessories, and a smaller light.

Q: 5. Will the case fit the R10 with the Xero X1i Crossbow Scope?

A: Yes it will fit the R10 and the Xero X1i scope.

Q: 6. Would this case work for 2 Lightstorm LS1s kits?

A: Yes it can hold 2 Aputure Lightstorm LS1s kits.

Q: 7. Will this work on R9 thru R29 ?

A: Hello John Unfortunately, No please see below... 3i-3613-BXB - for Ravin R9, R10, R15, R20, Tenpoint Stealth NXT, and Shadow NXT 3i301610B-R2 - for Ravin R26 and R29 3i-3613-BTN - for Nitro X, Nitro XTR, and Nitro RDX

Q: 8. Will this case fit the TenPoint RS440 with the Garmin Xero range finding scope?

A: The SKB iSeries 3613-12 Ultimate Waterproof Crossbow Case is not compatible with the TenPoint RS440.

Q: 9. Is there an optional storage option for the lid?

A: Unfortunately, there is no lid organizer compatible or dedicated to this case. The lid on the case is 36 x 13.5 and has a 2" depth. YOu can use the BH #PELO1510 but it won't be a perfect fit.

Q: 10. What are the exterior dimensions on this case?

A: Exterior Length 38.67 in 98.22 cm Exterior Width 16.05 in 40.77 cm Exterior Depth 12.84 in 32.61 cm

John	02/09/2024
[23.2 lb] After doing online research on where to buy a case with the right dimensions for my DJI Phantom 2 Vision + (with installed propeller guards), I found this case to be the best choice. It is best to cut the foam with a sharp knife for a cleaner, more professional look. Inside, there are 5 layers of 2 foam materials (not counting the bottom and top foam attached to the lid) You don't need the first layer. Set it aside as a spare. On the second layer, trace the profile of your drone and cut only that layer. On the next 3 layers underneath, cut the exact space where the landing skid and camera with gimbal would sit. Now the drone should sit snugly within the cutout sections; and about an inch from the top of the drone is still sticking out. That 2 space is necessary to prevent the top cover from putting too much pressure on the propellers when closed. You are done with layer #2. Remove and set aside layer#2 and work on layer #3 for the rest of the gear. Lay out the controller, batteries, cables, monitors, accessories, etc, within the remaining space and cut the foam for custom fit. When all accessories are in place, nothing should be sticking out of that layer. Replace layer #2 back on top of layer #3 and set the drone into it. It should look nice and neat with no visible clutter other than the drone. View attached photo of the finished case. 5

Thomas	23/08/2024
[Black] Fits the switcher perfectly. Has a good amount of storage underneath the switcher. High quality case, ability to lock w/ padlocks. Great product. 5

Chris	12/08/2024
[30 x 20 x 14"] I've been looking for a case like this for a while, glad I waited. The fact this is an American company, and more affordable is a major plus. This is for my Atlas equatorial mount for a telescope it's got extra room to put in other items. Tried it in the field because I go to very remote locations that can be dusty and rough off-road, and so far perfect. Thanks for the speedy delivery, great proc 5

NCvideoguy	13/06/2024
[Empty] Already pre cut inserts and ready to roll with my new camera and accessories. Love these cases. 5

Timothy	05/06/2024
[Latch] Excellent fit and protection. No worries on traveling with switcher. B&H shipped safe and fast as always! 5

Patrick C	18/04/2024
[30 x 20 x 14"] I have been a customer with B&H for a while and they never let me down on shipping quality equipment all the way to Guam ! Very satisfied with my SKB case for my Brompton folding bicycle when traveling - it's bomb proof ! 5