The Lectrosonics SRDB25 Unislot Adapter for Audio Packsfrom Lectrosonics SRDB25 Unislot Adapter for Audio Packsis a unislot adapter for the Lectrosonics Duopack, Quadpack and Octopack units. It includes the end adapter only with the two mounting screws. It can be used to simplify the mounting and interconnection of wireless receivers to your camera.

For Lectrosonics Receivers    DB25 Connector with Two Mounting Screws

Related Questions and Answers

Q: 1. Does this come with a connector with 2 RCA males going to 2 RCA males?

A: Yes

Q: 2. I ordered this but need the bezel that was not included to mount it in my camera slot. How can I get one?

A: Which camera is it?

Q: 3. Will this device allow one to use red/white RCA cables to feed a stereo receiver that has red/white RCA inputs? I currently plug a 1/8 to RCA adapter into my receiver's VCR in to connect my phone to the stereo, but being tied to the stereo with a 2 cable isn't convenient.

A: Yes this device is designed exactly for the application you're inquiring about. The adapter has a 3 mm to left and right/ rca out or red and white connectors. You can use an auxiliary input to connect the adapter.

Q: 4. Will this give enough gain to power a DPA 4061 lav? The Tasman DR-10's don't...

A: No, the DPA 4061 microphone is not compatible for use with the Lectrosonics MTCR recorder, The DPA 4061 requires 5 to 10V to operate but the Lectrosonics MTCR can only supply 2 to 4V of plug-in power.

Q: 5. Will this cable work between a lavalier comes with TA5 connector and 3.5 mm Mic input Transmitter (like G3)? I need to use a lavalier mic on both Lectro Lma and G3 so need kinda cable like this.

A: This cable will not work. Generally, your mics have to be wired appropriately for each wireless manufacturer's system.

Q: 6. Will this power a lectrosonics src receiver?

A: Yes it will. But there is also a dedicated SR receiver battery sled that also has the audio output jacks on the bottom. Part number is SRBATTSLED. It comes in 2 versions, one for top and one for bottom of receiver mounting. a href= https://www.bhphotovideo.com/c/product/604141-REG/Lectrosonics_SRBATTSLEDBOTTOM_SRBATTSLEDBOTTOM_SR_Battery.html target= _blank https://www.bhphotovideo.com/c/product/604141-REG/Lectrosonics_SRBATTSLEDBOTTOM_SRBATTSLEDBOTTOM_SR_Battery.html/aa href= https://www.bhphotovideo.com/c/product/621589-REG/Lectrosonics_SRBATTSLEDTOP_SRBATTSLEDTOP_SR_Battery.html target= _blank https://www.bhphotovideo.com/c/product/621589-REG/Lectrosonics_SRBATTSLEDTOP_SRBATTSLEDTOP_SR_Battery.html/a

Q: 7. can I get it for block 25?

A: Yes. B&H # LEAMJ25 is the Lectrosonics AMJ Color Coded Whip Antenna for Lectrosonics Belt Packs that is for Block 25. We do currently have it available in stock. http://www.bhphotovideo.com/c/product/823689-REG/Lectrosonics_AMJ25_AMJ_Color_Coded_Whip.html

Q: 8. Can I use a Sanken COS- 11D mic with a TA5F connector on the MTCR?

A: Yes. This will accept a TA5F COS-11D wired for Lectrosonics.

Q: 9. Will this cable work between the Mozegear D-Mini Papi Red Version and the RED DSMC2 I/O V Lock Expander?

A: You would need to check your components for these connections:Connector 11/8 (3.5 mm) right angle TRS mini-jackConnector 2TA5FIf you are looking to connect a microphone , then this might work, depending upon the pin configuration of your microphone.

Q: 10. Does this have a limiter or at least dual-level ability like the far cheaper Tascam DR10L? I see things I like about it but with my talent flying solo out there it would be nice to at least equal the Tascam in reassurance for me.

A: Split Gain mode records two different tracks, one at the normal level and another at -18 dB as a “safety” track that can be used in place of the normal track in the event that overload distortion (clipping) has occurred on the normal track—up to 23 hours on a 32GB card. The recorder allows for a wide range of input gain adjustments for mic- to line-level signals.