This TrekPak Divider Kit for Pelican iM2950 Casefrom TrekPak Divider Kit for Pelican iM2950 Caseis designed for use within a Pelican iM2950 Travel Storm Case. It can replace an existing divider system, or be used to create partitions within a compatible and completely empty Pelican case. TrekPak divider kits utilize water, tear, and shred-resistant foam dividers with a corrugated plastic core, plus steel U-shaped divider-locking pins. Once installed, they maximize available carrying space, protect equipment or valuables for transport, and provide interior organization that can easily be rearranged or customized along with any changes to the contents of the Pelican case.

The divider kit's design allows one of the two prongs on a divider-locking pin to be inserted within a partition's corrugated core. Two adjacent partitions can accommodate both prongs on a single divider-locking pin, resulting in them being firmly held together. Each divider-locking pin features a nylon pull-tab for easy removal, and the rapid release of any connected partitions.

Included within this divider kit is a perimeter insert, two 28" divider sections, two 18" divider sections, 30 divider-locking pins, a divider cutter, and one bottom, as well as one convoluted, egg-crate top foam unit. To ensure that the dividers properly correspond to a Pelican iM2950 Travel Storm Case's 10.5" internal height, the bottom foam unit must always be used when installing this divider kit. The perimeter insert can then be placed on top of the bottom unit so it conforms to the interior sides of the Pelican case. Like the dividers, the perimeter insert is constructed from foam with a corrugated core, so a partition can be connected to the perimeter insert by a divider-locking pin.

Items to be stored within the Pelican case can then be arranged on top of the bottom foam unit and within the perimeter insert before they are segmented using the dividers. Like the divider-locking pins, the cutting tool integrates with the dividers' corrugated core. Multiple partitions can be quickly, easily, and precisely created by sliding the cutting tool through the dividers, which can then be arranged and rearranged per whatever is placed within the case.

A previously installed top foam unit within a compatible Pelican case's lid does not need to be replaced with the included convoluted, egg-crate foam. However, when in use, the egg-crate foam's soft peaks help maximize cushioning to the contours of items that come into the most contact with it.

Fitted for Pelican iM2950 Storm Case    Continuously Adjustable Divider System    Organizes and Protects Case Contents    Maximizes Available Space    Fast, Easy Configuration    Durable and Soft Foam Dividers    Water, Tear, and Shred-Resistant    Steel Divider-Locking Pins    Egg-Crate Lid Foam, Bottom Layer Foam    Made in the USA

• For use within a Pelican iM2950 Travel Storm Case
• Replaces an existing divider system, or can be used to create partitions within a compatible and completely empty Pelican case
• Maximizes available carrying space, protects equipment or valuables for transport, and provides interior organization that can easily be rearranged or customized
• Utilizes water, tear, and shred-resistant foam dividers with a corrugated plastic core, plus steel U-shaped divider-locking pins
• Divider kit provides a perimeter insert, two 28" divider sections, two 18" divider sections, 30 divider-locking pins, one divider cutter, and one bottom, as well as one convoluted, egg-crate top foam unit
• Cutting tool allows for quick, easy, and precise creation of multiple partitions from divider sections
• Divider-locking pins create firm connections among perimeter insert and partitions
• Nylon pull-tab on each divider-locking pin allows perimeter insert and partitions to be separated, for fast configuration changes
• Bottom foam unit ensures the included dividers properly correspond to the Pelican iM2950's 10.5" internal height
• Convoluted, egg-crate lid foam's soft peaks help maximize cushioning to the contours of items coming into the most contact with it

Related Questions and Answers

Q: 1. Is there any assembly required, other than setting top and base foam in place, then Trek Pak insert?

A: TrekPak Divider Kit for Pelican 1605 Air Case BH #TRPA1605CI uses pre-installed wall sections, divider panels, locking pins and tabs, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. 30 x Pins and Pull Tabs are provided with the divider kit.

Q: 2. can i fit a zhiyun weebill s?

A: You will be able store the Zhiyun Weebill S into the hard case.

Q: 3. Would these be able to be modified for a Nanuk 963 case?

A: You could probably make it work, it would certainly fit in the Nanuk, its an 1" or 2 larger in depth and width.

Q: 4. What is the included cutter tool for, specifically?

A: The cutter tool for the TrekPak Divider Kit for Pelican 1605 Air Case can be used to make exact spaces to fit specific pieces of equipment, to cradle them for improved security.

Q: 5. I don't need the whole kit, only a pair of dividers strips. Will any of the other Pelican divider strips fit?

A: Yes, they will fit. Click on the link below to view; https://bhpho.to/2N9zfZ9

Q: 6. Could this manage to fit in the HPRC2550W?

A: The TrekPak Divider Kit for Pelican 1535 Air Case would not fit as designed in the HPRC2550W Water-Resistant Hard Case--it would require modification.

Q: 7. Does this come with a layer of foam on the bottom of the case, or any sort of padding to keep your gear off of the hard plastic bottom?

A: The bottom of the case is padded.

Q: 8. Can I purchase more dividers if needed?

A: Yes, you can purchase more dividers if needed. TrekPak 1615TP Divider Strip for Pelican 1615 Case BH #TR1615TPDS https://bhpho.to/38q4jSt.

Q: 9. Does this also fit the 1535TRVL?

A: I'm sorry but it is not compatible with the 1535TRVL.

Q: 10. Are the bottoms of the dividers also secured in place by locking pins?

A: The bottoms of the TrekPak Divider Kit for Pelican iM2100 Storm Case and the larger TrekPak divider design are not intended to be secured from the bottom using the locking pins. That being said, the connection points that the pins go into to connect the dividers together do go all the way through the dividers, so you could put pins in the bottoms if you wanted to.