Lineco Single Wall Corrugated Boards, 10-Pack

Lineco Single Wall Corrugated Boards, 10-pack

Product Code: eq21403
Availability: In Stock

$89.85 $129.38

Qty

18 reviews Write a review

Description
Reviews (18)

This pale blue-gray 10-pack of Lineco Single Wall Corrugated Boards, 10-Pack from Lineco Single Wall Corrugated Boards, 10-Pack can be used for print backers, picture framing, boxmaking, as dividers, or in any other application requiring a light, sturdy board. Each board is 0.125" thick, and made of bleached virgin fibers which are acid and lignin free.

Lineco employs alkaline buffering in their manufacturing processes to improve archival protection from acidic contamination. This buffering is accomplished with a 3% calcium carbonate reserve infused in all three layers.

Use for Print Backers & Picture Framing Suitable for Boxmaking & Dividers Smooth and Lightweight 0.125" Thick Acid and Lignin Free Alkaline Buffered / 3% Carbonate Made of Bleached Virgin Fibers

Parameters
Thickness	0.125" / 0.318 cm
Material	Fully bleached virgin fibers Acid free Lignin free Alkaline buffered with 3-percent carbonate
Packaging Info
Package Weight	2.04 lb
Box Dimensions (LxWxH)	18 x 14 x 1.2"

Related Questions and Answers

Q: 1. Will these fit an 8 x 10 photograph?

A: Yes, it will fit an 8x10 photo.

Q: 2. What's the vertical distance between the two screw holes for mounting to a wall stud?

A: The mounting plate's mounting holes for the Mount-It! Single Monitor Wall Mount Arm for 32" Displays BH #MOMI765 are about 6 inches apart.

Q: 3. how many mm between the 4 mounting screws ? I ask because when drilling holes in a brick wall it might be too close to the edge.

A: The manufacture does not provide the mounting hole distance for the Sonos Era 300 Wall Mount (Single, White) BH #SOERA300MW. However it is recommended that it is made to be installed to a stud.

Q: 4. There are two sides of adhesive - does it stick to the mat and mat board?

A: You apply these strips to a backing board with their adhesive tape -- for your purposes the adhesive tape is 1-sided, being already attached to the firm plastic strip.The adhesive doesn't cover the full width of the plastic strip; it leaves perhaps 1/5 of plastic free to act as a trap for the item being mounted. There is no adhesive in direct contact with the mounted item's surface.This is ideal for use on a backing board where glass and/or matting will keep the artwork from falling out of the strip's thin rim of plastic. It wouldn't work for a large paper item which lacked a glass in front -- the paper's weight would pull it out of plastic edges, I suspect. The role of this is to prevent artwork from shifting around after it matted and framed.Note that the adhesive holding the mounting strip is outside the dimensions of the artwork: the backing board needs to be around an inch wider than the artwork to have room for the strips.

Q: 5. Roughly how many standard prints can be stored in each sleeve? I'm not looking to jam 30 inside but how many will fit in comfortably?

A: I have put about 8 5x7's plus a few 4x6's in one sleeve with no problem.

Q: 6. Is it for printing right on board , or is it adhesive board?

A: Thank you.

Q: 7. Do these have a flap closure? The photo looks like it's an open ended sleeve. Thank you.

A: It's open-ended.

Q: 8. Do these come uncut?

A: Yes Lineco Conservation Mat Board (32 x 40", White, 10-Pack) is uncut mounting board.

Q: 9. Is it necessary to use this product for a fragile document if I'm conservation framing?

A: The Lineco Self-Sealing Mylar L-Velopes - 16 x 20 (Pack of 5) is for storage. If you are putting the document in a frame most do not use that.

Q: 10. Does the mentioned plastic strip go under or over the photo print? I have used positionable mounting adhesive in the past, are ?

A: When using the Lineco "See Thru" Mounting Strips, the plastic strips will go above, below, and on the sides of the photo print in order to cradle it so it is ready to be framed.

aciint	22/09/2024
[2.04 lb] I really depend on these easels, they stay where I put them and they are my go-to item when I need an easel back. They are as described and I would recommend them to anyone needing this item. 5

Terry	19/09/2024
[18 x 14 x 1.2"] Well made No loose seams Very clean & smooth (Very) Small nit: They come loose in a box. It is sturdy, but I wish they am in packaged bundles. 5

Michele M.	08/09/2024
[2.04 lb] Since we order this to complete a job for one of our clients (we do this job a few times a year) and up to now we have had no complaints; I have to assume the item is performing well and doing it's job. 5

Randy	07/09/2024
[2.04 lb] These glassine envelopes are are a good product, at a great price, and fast shipping! Thanks B&H! 5

Artist Italiana	22/08/2024
[2.04 lb] I spray adhesive to a photo or laser print and adhere to foam core. Then I take an easel back and stick it to the back so it will stand. They are easy, fast and affordable!! 5

Terry	08/08/2024
[2.04 lb] I use these for every print I make. Just a bit larger, so an 8x10 slips in easily. Highly recommended. Good price. 5

brandonslu	05/08/2024
[18 x 14 x 1.2"] we use the backs for table display posters. It works very well because it is sturdy and will lock in place to stand up to even heavier posters. 5

SANP Planner	26/07/2024
[18 x 14 x 1.2"] We are doing an auction fundraiser and are using the easel backs to display descriptions of the items being auctioned. In prior years the easel backs were hand-made by volunteers; your product is soooooo convenient; particularly being self-adhesive. Saving me a lot of time! 5

anyonymous	18/07/2024
[2.04 lb] Great value. These stands are well made and are perfect for my projects. 5

Barbara	12/07/2024
[2.04 lb] These small easels are reusable and are perfect for my Vintage Vamp earring displays. One word of caution - even though they come through with adhesive on the back, you have to apply a coating of your own glue if you want them to stay in place for longer than 15 minutes; Lineco could save some $$$ by forgoing the glue strip! 5