Impact Tilting Boom Pivot Clamp Tool

Product Code: eq21518
Availability: In Stock

$119.85 $166.59

Qty

13 reviews Write a review

Description
Reviews (13)

The Impact Tilting Boom Pivot Clamp Toolfrom Impact Tilting Boom Pivot Clamp Toolis a pivoting clamp for use with booms or poles with a diameter 1.37" (35mm). The clamp has a large ratcheting handle and will mount on a 5/8" baby pin.

Ratcheting Handle Supports 1.37"/35mm Booms or Poles For 5/8" Baby Pin Mounts

Parameters
Item Type	Boom Arm Clamp
Mount (to Stand)	5/8" Receiver
Compatible Pole Diameter	1.37" / 35 mm
Material	Aluminum
Weight	1.95 lb / 0.88 kg
Packaging Info
Package Weight	2.405 lb
Box Dimensions (LxWxH)	8.35 x 5.65 x 5.25"

Related Questions and Answers

Q: 1. Will my boom work if it is 1 5/16 or 33.33 mm? It says for 35mm in the specs.

A: It should be OK as there is some capacity to tighten. You could also wrap some rubber around your boom to make the clamp grip if it was a tiny bit too small.

Q: 2. Will this REALLY hold 8 lbs. if it extended out perfectly horizontally and the 8 lbs. is on the end?

A: Yes, the load capacity is based on the full extension of the arm, so it will hold up to 8 lbs.

Q: 3. Is that impact arm with lever better than the impact one with knob? How it's vs Manfrotto one?

A: The only difference between the Impact Pivot Arm 20" with Locking Lever included in the Impact Pivot Arm Kit and the Impact Pivot Arm 20" with Adjustable Wheel Lock Control, B&H # IMBHE115, or the Manfrotto 244N Variable Friction Magic Arm, B&H # MA244N, with its adjustable locking wheel versus the Manfrotto 143N Magic Arm without Camera Bracket, B&H # MA143N, with its pivot locking arm would simply be the locking mechanism; otherwise, they are identical in all other aspects. The Impact arms have a maximum load capacity of 8 lb (3.6 kg), whereas the maximum load capacity of the Manfrotto arms would be 6.6 lb (3 kg).

Q: 4. Can I attach a microphone (5/8 ) clip?

A: You probably can but it requires a few pieces of intermediate hardware: First get the Micro Clamp with Spigot Kit, then get a 3/8 female to 5/8 male adapter. Attach your 5/8 female mic clip. Voila!

Q: 5. Boom pole c stand holder

A: The Impact Tilting Boom Pivot Clamp attaches to a strong stand that has a 5/8 top like most C stands and others. This is some links to stand options, https://bhpho.to/3jWF6Rl, https://bhpho.to/3sh8O7v, https://bhpho.to/3AJNRFf . And this is some columns you can use as arms, https://bhpho.to/3sj2yMs . Note you will need a sand bag for the bottom of the stand and one as a counter weight, https://bhpho.to/3yUfJWE .

Q: 6. Will the smallest 8mm opening snugly hold a scrim flag such as the folding Impact or Westcott flags and scrims?

A: The Impact LSA-BC Light Stand Boom Clamp should work for holding flags. But most use one like this, BH #IMKCP200B (https://bhpho.to/3ZY7uJr).

Q: 7. Will this hold 1" tube like a C-Stand?

A: This C-Boom Clamp is only for 1-1/4" and 1-1/5" pipes.

Q: 8. Can the ball pins be rotated to various positions? If so, can they be locked in those positions?

A: Yes it does rotate

Q: 9. What booms or adapters do you carry that will fit this 1.37 inch clamp?

A: The Impact Tilting Boom Pivot Clamp only works with this boom a href= http://bhpho.to/1jjxsxb. target= _blank http://bhpho.to/1jjxsxb./a

Q: 10. how do you use it?? I just bought it. There are no directions!

A: The user manual to the arm can be found here: https://bhpho.to/2KjwXWF

Fawn	23/08/2024
[5/8" Receiver] I tried a few different microphone mounts in my audiobooth and was not able to get the results I needed. I use these arms in my video productions and thought why not try it as a microphone mount! It works great and gives me so much more flexibility than I had before. Check out my youtube review video to see: https://youtu.be/Gu9N1vjj4Fc 5

xchamp	21/08/2024
[2.405 lb] Great unit, but I had to mold half of a pvc tube to the outside of the boom and inside of the clamp to fit my boom ... I suppose professional booms are of standard size and will fit well, but mine is more of an amateur boom and needs some sort of liner to clamp well.� No issues other than fit ... it works great!� Very fast delivery, too! 5

Rodney	08/08/2024
[5/8" Receiver] I use two of these to hold a flash on each side of a tripod. It allows complete flexibility of the flash position without ANY movement when it is locked down. I used existing speedlights rather than an expensive dedicated macro flash device. This saved big $$. The quality is very good, heavy construction and rock solid. Well worth the cost. I find it easy to use and convenient to leave attached to the tripod. I spent about a month looking for a cost effective setup for macro flash until I found this. I am extremely happy with this product. 5

Tyler	15/07/2024
[Aluminum] Affordable option and works great 5

Greg	13/07/2024
[2.405 lb] I was looking for a boom arm setup specifically dedicated to place a small light on, when I discovered this pivot clamp. Already owning a mic boom, this clamp enables me to use something I already have on hand to put a light up high if I want or need to. A sand bag provides ballast, and the whole setup works well for my purposes. By using this, I have no need to spend a few hundred on a dedicated setup. I can now use gear I already have on hand to get the job done. 5

Roy	18/06/2024
[2.405 lb] Much stronger and more stable than the plastic ones. I have it holding a 12' boom pole with counterweight. I didn't trust the plastic one with a high dollar shotgun mic, out over someone head. Fiberboard insert is removable so you can use a slightly larger pole than stated. 5

Jason Harvey	11/06/2024
[Aluminum] Mounted a sony a6500 in a cage with a shotgun mic and a 7 inch monitor to a benro video tripod and it handled the weight like a champ!!! 5

Barrie	24/05/2024
[5/8" Receiver] This was a replacement part for a cheap boom pivot that had stripped its threads. High quality, solid replacement part. Be careful to get the correct size as there are a couple of alternative diameters around. B&H shipping is reliable and fast. 5

Thomas	16/05/2024
[2.405 lb] I purchased 3 clamps for use in my studio. I am located an hour away from Toronto Canada. Delivery was fast only a few days. Even with the exchange rate on our dollar still well worth it. Very well made and sturdy to handle most lights and softboxes. My only regret I should have got them years ago. I made do with cheap plastic clamps. would definitely recommend them. 5

John	15/05/2024
[Boom Arm Clamp] Great support arm. Works well with any brand of super clamp. I use this as part of a rig to mount a camera behind a backboard at college basketball games. 5