Redrock Micro Flexcable For Microremote Gimbal

Product Code: eq21618
Availability: In Stock

$297.00 $371.25

Qty

9 reviews Write a review

Description
Reviews (9)

The Redrock Micro flexCable for microRemote Gimballets you connect the microRemote Fingerwheel to the microRemote Basestation. This 50" version is designed to allow for full range of gimbal movement while using the Fingerwheel. It features a 3-pin connector on one end and 5-pin on the other.

Connect Fingerwheel to Basestation for Full Range of Gimbal Movement

Parameters
Length	50" (127 cm)
Connector 1	3-pin
Connector 2	5-pin
Weight	2 oz (57 g)
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	9 x 1 x 0.3"

flexCables are 35% lighter than most standard cables thanks in large part to the cable sheathing that's ultra-lightweight (yet still provides the required protection).

flexCables have a 200% greater flexibility than most standard cables, allowing for less drag and easier cable wrangling. These cables can be wrapped, twisted, and bent to keep your rig tight without damaging or crimping the cable.

flexCables are 20% thinner than most standard cables. You can more easily install them where you need to and secure them with less effort.

Related Questions and Answers

Q: 1. I want to use this on the Dji Ronin M, What else do I need to buy to make this work? Just a Ptap Cable to power it from the Ronin M? I basically want to be able to be a single operator with the thumb controller. Where Can I find out what all I need to make this work. I live in South America and do not want to have to order some other part after the fact. Thanks for any information as I am looking for a solution for one man operation with a ronin m, a7sII an Loxia lens. I know I need the gear straps for the lens, but is there anything else I need? Extra plates,arms or anything for the ronin to get this set up and work, Plan on using a smallhd502 on the ronin handles. Thanks for any information.

A: Hi EricThere's a lot of ground to cover there. what I recommend is picking up the remote fingerwheel bundle without cables, and get the DJI specific cable pack:a href= http://www.bhphotovideo.com/c/product/1140914-REG/redrock_micro_8_114_0011_microremote_handheld_fingerwheel_bndle.html target= _blank http://www.bhphotovideo.com/c/product/1140914-REG/redrock_micro_8_114_0011_microremote_handheld_fingerwheel_bndle.html/aa href= http://www.bhphotovideo.com/c/product/1111304-REG/redrock_micro_8_100_0007_dji_ronin_microremote.html target= _blank http://www.bhphotovideo.com/c/product/1111304-REG/redrock_micro_8_100_0007_dji_ronin_microremote.html/afor mounting the motor, you'll want the rhino mount, probably 4 a href= http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html target= _blank http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html/afor lens gears, you might be best to go with a kit that covers all possible lens sizes (though loxia are typically A or B sized lens gears)a href= http://www.bhphotovideo.com/c/product/748784-REG/Redrock_Micro_8_003_0107_microLensGears_Kit_4.html target= _blank http://www.bhphotovideo.com/c/product/748784-REG/Redrock_Micro_8_003_0107_microLensGears_Kit_4.html/aFor mounting the 502 monitor, you can look at the billie ball mount as a low profile ball mount that attaches to the DJI accessory platea href= http://www.bhphotovideo.com/c/product/970766-REG/redrock_micro_2_138_0001_billie_ball_mount.html target= _blank http://www.bhphotovideo.com/c/product/970766-REG/redrock_micro_2_138_0001_billie_ball_mount.html/ahope that helps

Q: 2. Can this rig work with the Ronin M?

A: Yes the Redrock Micro microRemote Handheld is so compact it is designed to work on stabilizers as well as conventional set-up's.

Q: 3. could it be used on a Juicebox battery 2 pin lemo going out to a Silencer Pro control box with JST input?

A: Hi Peta - thanks for asking. It may be possible, but we have no info on using it with those items and in reverse order (this is to draw power from jst and supply it to 2-pin) so we can't recommend it.

Q: 4. Will these cables work with the Ronin M?

A: Hi Stephanie - thanks for asking. Yes the flexCable wireless kit works for all Ronins including Ronin M

Q: 5. Will this work with the Tiltamax Nucleus M wireless follow focus system?

A: This cable is specifically for Redrock Micro Product, it is not recommended for the Nucleus M. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com. From there we may be better able to find the proper product for your needs.

Q: 6. How can you change the focus throw?? I get how to change Gain/smoothness but want to adjust the throw. At the moment, if you turn the Remote only a few millimetres it will focus the lens quite extremely. I hope that makes sense!?

A: Hi Dane - the microRemote has 270 degrees of throw which should be more than enough for almost any lens (with the exception of macro lenses that have )you can manually calibrate to a portion of the lens' throw so you can get even more granularity for shots that have limited range. If you are looking for additional support and you own a microRemote please contact our support group at support@redrockmicro.com - they can offer more assistance there. Thanks

Q: 7. Is this 3pin lemo connector compatiple with the 3 pin lemo port on the Steadicam Zephyr which is an 12-24v EGG-0B-0303?

A: Hi JB - thanks for asking. This cable is designed for the powerPack to power barrel connector devices such as compatible smallHD monitors.I think we saw a similar question coming from you earlier, so if you are looking for a custom cable you might drop us a line directly and see if we can solve your problem.

Q: 8. are both connectors Pin-1 +VDC? Thank you.

A: If I understand your question, you want Pin-1 to be +VDC. The answer then would come from what power source it is connected to. If that is Pin-1 +VDC, this would be as well.

Q: 9. Is it control by wireless only? Can it directly control by fingerwheel through the cable?

A: Yes, this particular bundle comes with the fingerwheel which is a wired connection. perfect for solo operators, very fast and responsive

Q: 10. Any suggestions for Power when used with a Sony A7sii rig with no V-tap battery source? Thanks!!!

A: Hi Homer - great question! you can use with pretty much any battery that delivers 12-18v power.if you have a Freefly gimbal you can use the lipo battery on that (you'll need an additional cable). if you have a ronin gimbal, you can use the onboard p-tap for powerif you have literally no other power supply and are looking for one, we typically use powerBase - this one is pretty great because it also provides power to your sony A7a href= http://www.bhphotovideo.com/c/product/1077507-REG/switronix_pb70_a7s_powerbase_70_battery_for.html target= _blank http://www.bhphotovideo.com/c/product/1077507-REG/switronix_pb70_a7s_powerbase_70_battery_for.html/ayou can also use camcorder batteries with built-in p-tap that are inexpensive, like this one a href= http://www.bhphotovideo.com/c/product/835236-REG/Ikan_IBS_U65_IBS_U65_BP_U_Ultra_High_Capacity.html target= _blank http://www.bhphotovideo.com/c/product/835236-REG/Ikan_IBS_U65_IBS_U65_BP_U_Ultra_High_Capacity.html/a hope that helps. If you need any additional tips drop us a line at sales@a href= http://redrockmicro.com target= _blank redrockmicro.com/a

Lucas	24/09/2024
[0.1 lb] This follow focus system is extremely simple to use. All you need is 2 AA batteries in the remote, and a power source for the basestation. We use this system on our RED Helium, and plug the basestation power cable into a v-mount battery on the back of the camera via the included D-tap cable. Once you connect the motor to a rail and plug it into the basestation, boom, it is up and running. Very reliable. 5

Gregory	05/09/2024
[2 oz (57 g)] I've been using this wireless remote since the beginning and im here to tell you that it's one of the best wireless follow focus that just works! COMPLETELY WORKS!! Since my initial review of I have always been confident of this device and it's clearly a winner. When RedRock added the newest software improvements for the remote (Artistry) this device ROCKS!! You WONT BE DISSAPPOINTED! 5

Thad	19/07/2024
[3-pin] Redrocks microRemote is a solid, dependable unit backed by good support. I have had mine for four years. At one point, I accidentally damaged the antenna on the receiver and needed to replace it. Redrock sent me the parts either for free or for a very small charge. They have been very quick to respond to me when Ive had questions as well. Redrock also updates the firmware periodically. The v4 update added remote calibration (so you can calibrate lenses from the remote instead of from the receiver). I cant count how many times Ive forgotten to calibrate after a lens swap and then walk away from the camera. Or if Im working with an AC, I often handle the motor gear setup and auto-calibrate for my AC. If I forget, now my AC can do it remotely. Great! The firmware is at v5 now, so that shows their commitment to providing product value. The unit is solid and well built. Ive never had an issue with the power of the motor when using it with the Rokinon set or Canons CN-E series. The motor has a nice feathering to avoid hard focus stops. And you can crank the gain up or down. Ive also never had a problem using it at a distance, but the remote is usually pretty close to the receiver in my setups. The ability to switch directions from the receiver is great. I tend to use it backwards from how traditional ACs do, so this helps a lot. Overall, this is an excellent product that I intend to keep using for years to come. The only issue I have with the unit is that the battery plate requires a small philips head screwdriver to remove. This can slow things down during production, so I discarded the screws and used gaffers tape to keep the plate in place. Much faster! 5

Run	14/07/2024
[50" (127 cm)] I love my microRemote. I've had mine for over a year and I have not had any issues with it. I do mostly concert and event shooting. It gives me freedom of running around and focusing instantly on any situation/scene. With the finger wheel attached to my microhandgrip my hands never leave the rig. This bundle was a great start for me. Since most of my shooting is run and gun I did not need wireless control. If you are a run and gun shooter this is a great tool. Its been very reliable. The auto calibration is my favorite feature. I can switch lenses and let the unit calibrate and I'm good to go. 5

Michael Digital	29/06/2024
[2 oz (57 g)] These are the best lightweight and flexible cables. �I'm upgrading all my rigs to them. 5

Kenji	23/06/2024
[2 oz (57 g)] Kit came with everything I needed. Wireless Focus has great range, but more impressive is the fingerwheel to pull focus on your own! Hard case to hold everything is a great plus, highly recommended! 5

Peter	28/05/2024
[2 oz (57 g)] The Tandem Bundle from Redrock is a serious kit to own! Both controllers are included for solo op or remote ac control, and loads of accessories. The carrying case is foam fitted, perfect for packing all of the gear on the go, and securing it safely. 5