Redrock Micro 3-Pin To 2-Pin Lemo Flexcable 24"

Redrock Micro 3-pin To 2-pin Lemo Flexcable 24"

Product Code: eq21621
Availability: In Stock

$157.53 $244.17

Qty

16 reviews Write a review

Description
Reviews (16)

This 24" long Redrock Micro 3-Pin to 2-Pin LEMO FlexCable 24"is for powering a 2-pin Teradek or Paralinx wireless video transmitter from the 3-pin powerPack output port. Power is 12v regulated and delivers consistent, safe, and reliable power. Please note this is an Arri-Polarity wired cable.

Designed to be 200% more flexible than standard cables, which means easier cable wrangling and less drag when using accessories between the camera and gimbal frame, such as when using a Fingerwheel controller or for power connections.

Connects to Redrock Micro powerPack Supports 2-pin LEMO Teradek Transmitter Supports 2-Pin LEMO Paralinx Transmitter

Parameters
Length	24" / 61 cm
Connectors	Connector 1: 1 x 3-Pin LEMO Connector 2: 1 x 2-pin LEMO
Packaging Info
Package Weight	0.07 lb
Box Dimensions (LxWxH)	9 x 2.4 x 0.6"

Related Questions and Answers

Q: 1. Will these cables work with the Ronin M?

A: Hi Stephanie - thanks for asking. Yes the flexCable wireless kit works for all Ronins including Ronin M

Q: 2. Has anyone used this for AUdio? I have a 5pin lemo audio out on my camera and would like to connect this to my stereo mini jack

A: This cable, as stated, is designed for Timecode. HOWEVER, if the connections inside cable and inside your camera are wired the same, it may work.Its impossible to tell without knowing the camera wiring of its connector. I would contact your camera manufacturer.

Q: 3. Will this work with the Zacuto Gratical Eye?

A: Yes, Its workink

Q: 4. Does this have the LEMO FGG.0B.301 male connectors?

A: Unfortunately, Redrock Micro does not provide information on how their 7-Pin LEMO to 7-Pin LEMO flexCable is constructed. It is specifically made for use with their microRemote Torque Motor.

Q: 5. Can I use this to power my Heden Carat resceiver from my Steadicam Zephyr camera stage?

A: Hi JB - we don't have compatibility information regarding use of our cables with non-redrock gear, sorry. I'd suggest checking with Heden on their power requirements, just make sure you know if they use arri standard or US standard polarity (they are opposite of the two) and use the appropriate cable.

Q: 6. This ok to use on Teradek Cube? Thankssss

A: Yes, this meant for most any Teradek device.

Q: 7. this cable work with sound devices 633?

A: This will jam the sound devices 633 from the tentacle however it will not jam the tentacle from the 633 as it is only single direction

Q: 8. Will this power the Red Komodo and Cine 7?

A: The Red Komodo and the SmallHD Cine 7 both have a 2-pin LEMO power connector, so in theory it should work. However with out testing I cannot confirm. This cable is described to power an optional Redrock microRemote.

Q: 9. are both connectors Pin-1 +VDC? Thank you.

A: If I understand your question, you want Pin-1 to be +VDC. The answer then would come from what power source it is connected to. If that is Pin-1 +VDC, this would be as well.

Q: 10. is compatible with arri2 2 pin conector?

A: Lemo ports on Letus Helix are reversed polarity from most equipment with Lemo connections. Not sure but Arri might also be reversed polarity.

Paul	28/09/2024
[24" / 61 cm] I use this to send timecode from Tentacle to Red Komodo, via Mutiny I/O. 5

Michael Digital	26/09/2024
[0.07 lb] These are the best lightweight and flexible cables. �I'm upgrading all my rigs to them. 5

Yuki	07/09/2024
[0.07 lb] If you have mini LF or Alexa 35, and want to use Tilta Nucleus M, this is a perfect cable for you. It connects to the 3pin port and power the motor. On top of that, it adds the ability to use run stop. 5

Tony	22/08/2024
[0.07 lb] Great 5

Jorge	18/08/2024
[9 x 2.4 x 0.6"] It works. 5

Didier	17/08/2024
[0.07 lb] those connectors and kind of cable are always expensive as usual, but they do what they are built for. So far, nothing to complain about it. Buy this one for my Teradek Ace 800, so I can always have a back-up one on any shooting in case the original is lost or broken. It is identical to the original that came in the ACE 800's box. 5

Matt H.	04/08/2024
[0.07 lb] Fits and works on bolt pro 600 receiver and transmitter. 5

Benjamin	18/07/2024
[9 x 2.4 x 0.6"] Great, but the price. The price is just stupid. It's so incredibly over priced for what it is. I'm certain this item won't fail me, but my god – the price for some cable. 5

Malc84	14/07/2024
[9 x 2.4 x 0.6"] A sturdy reliable product. 5

John	29/06/2024
[9 x 2.4 x 0.6"] Solid cable! Great connections. Sometimes P-Tap are loose and janky, but this one clicks right in. My only comment is that the correct product was delivered, but it's not as-pictured. The LEMO connection is partially wrapped in bright red rubber, which is great and should add to the longevity of the cable, but it's worth noting that the product differs than the photo on B&H. 5