Lectrosonics Mc49 Ta3F To Ta5F Adapter Cable 12"

Lectrosonics Mc49 Ta3f To Ta5f Adapter Cable 12"

Product Code: eq21681
Availability: In Stock

$402.00 $635.16

Qty

9 reviews Write a review

Description
Reviews (9)

The 12" Lectrosonics MC49 TA3F to TA5F Adapter Cable 12"from Lectrosonics MC49 TA3F to TA5F Adapter Cable 12"is for connecting a line level signal to a wireless transmitter. It can be used for audio applications such as mixers, recorders, and more. It features TA3F to TA5F connectors and is designed to work with Lectrosonics transmitters.

For Lectrosonics Transmitters Suitable for Mixers and Recorders

Parameters
Connector 1	TA3F
Connector 2	TA5F
Length	12" (30 cm)
Weight	Not listed by manufacturer
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	3.2 x 2.9 x 0.7"

Related Questions and Answers

Q: 1. Will this work with a Zaxcom rx200 reciever?

A: Yes, the Cable Techniques CT-LPST5A3M-24 LPS Low-Profile TA5F to Dual Right-Angle XLR3M Y-Cable is compatible for use with the Zaxcom R200 Wireless Receiver which has a TA5 (5-pin mini-XLR) output connector.

Q: 2. Can this adapter be used to bring sound from two different sources into a camera like the Sony A7 III?

A: Yes but be careful - the inputs on the camera are Mic level and if the sources are Line level they could overload the inputs and distort. Are you hoping to use them with a mixer or other source that has mini-XLR's (TA5)?

Q: 3. Will this Connector work with the Audio Technica ATW-T310?

A: Although the Tram TR50GSO- has a 4 pin hirose connector, it has been wired to work with Sony Wireless transmitters, and is not guaranteed to work with the Audio-Technica ATW-T310. These mics are not available for online purchase. Please call our sales team at 800.606.6969 to place a special order for the correct variant.

Q: 4. Will this Tram TR50 work with Sennheiser EW100 G3 system?

A: Yes, just make sure you have the right Sennheisser 3.5mm connector. I have bought 3 of these sor the g3's . They're a huge improvement over the sennheiser G3 Lav. They don't break as easy and they are pretty affordable to some of the alternatives. They are easily hidden and don't make quite the handling noise the originals do either. I use these as a back up for my MKH50 and occasionally have a hard time descending which is the better mic to use in edit.

Q: 5. Would the Lectrosonics MCSRTRS be the correct cable to work with a Lectrosonics SRb going into channels 7/8 on a Sound Devices 833?

A: That is correct so long as you have a proper output sled with two ta3m outputs for the SRb.

Q: 6. I have a COS-11D lavalier mic with TA5F connector for Lectrosonics. Will this adapt it for use on Sennheiser AVX transmitter?

A: The PSC Locking 3.5mm TRS to TA5F Cable for Lectrosonics PDR has a female TA5 connector meant for the Lectrosonics PDR's male TA5 input jack. It will not connect to a microphone's female TA5 output.

Q: 7. Does this cable split the signal coming from the TA5F into stereo left right, or is it a mono down mix?

A: The PSC Locking 3.5mm TRS to TA5F Cable for Lectrosonics PDR (6"), BH # PSC1134, may be used to record a stereo (left and right) signal going into the Lectrosonics PDR TA5M's stereo input.

Q: 8. Has anyone used this cable to feed the stereo out on the MIXPRE to a Lectrosonics SPDR to use as a backup recorder?

A: Feeding the Lectrosonics SPDR Stereo Portable Digital Recorder from the 3.5mm Stereo output of a Sound Devices MixPre Series recorder is an excellent application for the Remote Audio Unbalanced Adapter Cable 3.5mm RA to TA5F for Stereo Outputs into Lectrosonics Transmitters.

Q: 9. Is this cable balanced or unbalanced?

A: Yes this cable is balanced

Q: 10. If I wanted to us this with my mixpre10 II to send out of the two L,R TA3outputs to a camera 3.5mm line in ?

A: Yes it should work for your intended purpose.

Bob	07/09/2024
[0.04 lb] Cable works fine . Not sure why we have to have 2 separate cables for Mic and line level but we do. 5

anyonymous	17/08/2024
[0.04 lb] We used this cable to shoot MOTS (after a convention meeting), and we weren't tethered to the camera. We had more freedom of motion than if we'd been cabled to the camera. The audio was excellent and I'd recommend this cable to anyone in the industry! 5

Scott G.	14/08/2024
[0.04 lb] A great cable to have in the mix when working with Lectrosonics gear 5

John	04/08/2024
[0.04 lb] This product works as indicated. My main grip was that it is extremely expensive for a cable. 5

blestage	27/06/2024
[0.04 lb] I use this cable to power the Lectrosonics SRb receiver when attached to a professional camcorder. It provides a secure connection via the Lectrosonics locking connector, and the cables are cut to the perfect length to tap into most camcorders' accessory Hirose power taps. 5

Mike	19/06/2024
[0.04 lb] Ideal for plugging in the Boom for Wireless Booming or handheld XLR Microphones into Letrosonics Wireless packs. 5

David	07/06/2024
[TA5F] Pricey but the cost of doing business and I can count on it. 5

Jeffrey	15/05/2024
[TA5F] Only two ways to go here. It works and does what it was supposed to or it doesn't work at all. 5 stars pretty much indicates the thing works. Nuf said? 5