Featuring both a 2.4 GHz wireless radio transmitter and receiver, the Yongnuo YN560-IV Speedlite Flashis a long range manual flash unit capable of triggering other flashes from up to 328' away as well as being triggered with the RF-603 and RF-602 wireless transmitters. The YN560-IV is powerful with a guide number of 190' at ISO 100 and 105mm. The unit is also quite versatile with a zoom range of 24-105mm, which is able to be expanded to 18mm with the built-in wide-angle diffuser. Additionally, this output can be adjusted from 1/1 to 1/128 power in 1/3 and 1/2 EV steps.

Full bounce and swivel lighting is possible due to -7 to 90° tilt and 270° of rotation with the locking flash head. The flash can also be triggered optically with either instant sync or skip pre-flash options for simpler off-camera firing. A built-in PC sync port further enhances the flash's connectivity and Multi-mode allows for stroboscopic lighting effects. The flash runs on four AA batteries or an optional battery pack via the HV connection and has a recycle time of about three seconds. It comes with a protective case and a stand.

2.4 GHz Transceiver with 328' Range    Guide Number: 190' at ISO 100 and 105mm    Zoom Range: 24-105mm (18mm with Panel)    Output Range: 1/1 to 1/128    Tilts -7 to 90° & Rotates 270°    Optical Slave Functionality    Recycle Time: Three Seconds    Multi-Mode for Firing Series of Flashes    PC Sync and HV Power Ports    Runs on Four AA Batteries

Features 3 groups and 16 channels for wireless operation

Can receive a wireless signal from YN560-IV, YN560-TX, RF-603 (I/II), and RF-602

Metal hot shoe for standard on-camera triggering

Large LCD screen for viewing settings and making adjustments

Socket for SF-18C or SF-17C external power pack

Audible flash ready indicators offer different sounds based on flash status

100-1500 flashes from one set of batteries

Automatically saves your current settings

Built-in bounce card

Color temperature of 5600K

Eight levels of flash output from 1/1 to 1/128 with 29 individual settings

Optical triggering range of 66-82' indoors or 33-49' outdoors

Related Questions and Answers

Q: 1. Is this compatible with 6d mark II

A: Yes, but it is not ttl, it is a manual flash and will work with any camera.

Q: 2. Will this flash work in manual mode with a YNE3-RX? I want to set power level REMOTELY with my YNE3-RT and don't need TTL. I am looking for a flash that I can set power level remotely with my existing RT system.

A: I bought it to use with a YNE3-RX and it cannot be controlled anyway as slave. It is only triggered and you have to set power manually in the flash unit...very stupid as Trigger and Flash unit are of same brand. I am very disappointed. I don't need TTL either, but power setting is the minimum,,,

Q: 3. Hello. Is it any way to make it work with Sony a7 III? I have couple of them, and I would love to use them with my new camera. I know I shoul buy a trigger dedicated for Sony (like Godox or something), but do I need a receivers too if these flashes have built-in 2.4 GHz transreceivers?

A: The only way to trigger these flashes is to get a transmitter and receivers from Godox. Click the link below to view your options; https://bhpho.to/2KrvLRf

Q: 4. it's hard to turn this flash, I'm afraid it will break my hotshoe if I turn it on the camera, can I loosen the swivel?

A: The flash was a gift for my son. I don't have any info about its operation.

Q: 5. Ser que o trabalho YN560-IV na A58 Sony?

A: Sim esse flash Yongnuo funciona com a Sony A58.

Q: 6. Will the Yongnuo YN-622C-TX control and fire the Yongnuo YN560-II using the Yongnuo 622 receivers?

A: Yes. The combination of these items will work together but the flash is manual only. When you take a shot it will only flash. It will not work in TTL and you will not have the ability to change the power settings from the camera, only from the flash.

Q: 7. Is this flash compatible with the Nikon D610 - can it be used with a Yongnuo YN-622N-TX?

A: Yes, you can use the YN560-IV speedlight with the D610 and YN-622N-TX.

Q: 8. Is this compatible w Fuji X?

A: Yeah, it works. Really large and heavy for fuji x systems. Used mine off camera with a fuji xe1 and some cheapo wireless triggers. Worked flawlessly. Controls are super simple and recycle time is short. Its a good buy.

Q: 9. Does this work with Canon E05 Rebel t3?

A: It should work with all cannon cameras with a hot shoe.

Q: 10. Will the YN-e3-rt II work with the yn560 IV and the yn-968n?

A: It will not you will need the YN-622C. https://bhpho.to/2X74ZS2