The blue CAT6ASHB-1000 650 MHz Shielded Cat 6a Cable 1000'from CAT6ASHB-1000 650 MHz Shielded Cat 6a Cable 1000'is a shielded Cat 6a, 23 AWG cable that provides 650 MHz bandwidth for high-speed signal transmission. It can be used in various environments for applications such as distributing data, voice, video, and more on today's high-speed Ethernet and gigabit networks.

The CAT6ASHB-1000 cable meets all Cat 6a TIA/EIA standards and features four pairs of shielded twisted pair cable. Each individual pair is properly spaced between the twists of the wire to greatly reduce signal loss compared to standard 100 MHz cable. The CAT6ASHB-1000 cable is RoHS compliant and has a limited lifetime warranty.

For Data, Voice, and Video Networks    Rated Cat 6a 650 MHz High Speed    4 Pairs of Shielded Twisted Pair Cable    23 AWG Copper Conductors    RoHs Compliant    UL Rated    Limited Lifetime Warranty

Durable, high-density polyethylene insulation, PVC jacket

Meets all Category 6a TIA/EIA standards

23 AWG solid bare copper conductors for superior conductivity

Applications include:

1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mb/s Token Ring (IEEE 802.5); 100 VG-AnyLAN 100 Mb/s, TP-PMD (ANSI X3T9.5); 55/155 Mb/s A, and voice

Related Questions and Answers

Q: 1. Is this Cat5 retro-compatible too?

A: I am only seeing Cat 6A capability.

Q: 2. The leads look to be about 24", is that close?

A: Yes, the four cables are about 24 inches long each.

Q: 3. Will this support PoE?

A: Yes.

Q: 4. This may seem stupid but is feedthrough meaning you can just connect cat5 or six cables on either end? no terminating?

A: Yes, the Neutrik NE8FDX-P6-B D-Shape Cat 6a Shielded Feedthrough Panel Connector (Black) BH #NENE8FDXP6B has a jack on both sides.

Q: 5. What is the AWG of the pairs? Is it 23 or 24 awg? Are the wires stranded or solid? Are the wires 100% copper or some type of alloy?

A: The Tera Grand Premium Cat7 Double-Shielded 10Gb 600 MHz Cable (Black, 75') BH #TECAT770075K has 27 AWG and stranded tinned copper wires.

Q: 6. Are these compatible with all Neutrik Ethercon shells?

A: The Neutrik etherCON Cat 6a Feedthrough Coupler mates to all etherCON Cat 6 (NE8MX*) and etherCON Cat 6A (NE8MX6*) cable connectors and cable connector carriers. The Neutrik etherCON Cat 6a Feedthrough Coupler does not mate to etherCON Cat 6 (NE8MC6-MO and NKE6S-* cable assemblies).

Q: 7. Is this cable plenum rated?

A: This Comprehensive Cat6 550 MHz Shielded Solid LAN Cable (1000', Black) is not plenum rated.

Q: 8. Is this good from a modem to a switch, if I'm just on ADSL2+ bonded?

A: It is a better cable than cat 5 or 6. So I would use it on everything

Q: 9. I would think you need 2 of these units send and receive ?

A: Depending on the application, you may need both male and female versions of the SoundTools CAT Tails MX Four XLR Male Audio Lines Down Shielded Cat 5/6/7 Cable. For instance, if you use this cable to send an analog signal over Cat cable and the device at the receiving end needs to make analog XLR connections.

Q: 10. Which patch panel are these connectors compatible with?

A: You would use Neutrik NZP1RU-12 Angled Rack Panel with Twelve D-Shaped Cutouts (1 RU) (NENZP1RU12) or Neutrik NZP1RU-8 Angled Rack Panel with Eight D-Shaped Cutouts (1 RU) (NENZP1RU8).