The blue CAT6 Unshielded Cable 1000' - 750 MHz, Bluefrom CAT6 Unshielded Cable 1000' - 750 MHz, Blueis a CAT6a, 23 AWG cable that provides 750 MHz bandwidth for high-speed signal transmission. It can be used in various environments for applications such as distributing data, voice and video on today's high speed ethernet and gigabit networks.

The CAT6AB-1000 cable meets all CAT6a TIA/EIA standards and features four-pairs of unshielded twisted pair cable. Each individual pair is properly spaced between the twists of the wire to greatly reduce signal loss compared to standard 100 MHz cable.

For Data, Voice and Video Networks    Rated CAT6a 750 MHz High Speed    4-Pairs of Unshielded Twisted Pair Cable    23 AWG Copper Conductors    RoHs Compliant    UL Rated    Lifetime Warranty

Durable, high-density polyethylene insulation, PVC jacket

Meets all Category 6a TIA/EIA standards

23 AWG solid bare copper conductors for superior conductivity

Applications include:

1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN 100 Mbps, TP-PMD (ANSI X3T9.5); 55/155 Mbps A, and voice

Related Questions and Answers

Q: 1. Is it compatible with technics rp-dh1200 headphones?

A: No. This is for the listed Senal headphones only.

Q: 2. Are the conductors in this cable made of stranded wire or solid wire?

A: The Bolide Technology Group CAT6 Twisted Pair Networking Cable (1000', White) BH #BOCAT6A1000W has a solid copper-clad aluminum wire under the PVC jacket.

Q: 3. Does it carry Phantom Power? No mention of shielding either.

A: This will carry phantom power. Here are more technical specs: • Inner conductor: 4 x 2 conductors / Bare Copper 7 x 0.20 mm (22 AWG) • Number of conductors: 8 • Inner conductor section: 0.22 mm² • Isolation: HDPE 0.95 mm • Conductor twisting: Yes • Outer jacket: PVC • Outer jacket color: Black • Outer jacket diameter: Ø 6.5 mm

Q: 4. What is the quality of the cable itself, not just the connectors? I'm looking for a road-worthy cable with a durable jacket.

A: The best cat5e cables that I've found for that purpose are made by Elite Core, not carried by B&H unfortunately. They are very flexible, almost as easy to handle as a good quality XLR cable.

Q: 5. Is this a shielded cable? Would it be suitable for AES500 connections?

A: Yes it is shielded and If the units being connected run over Cat6 Ethercon, than this should work.

Q: 6. What is the proper wire stripper for BNC ?

A: We recommend the Canare TS100E Coaxial Cable Stripper (Adjustable with 5 Presets), B&H # CATS100E, for this cable. https://bhpho.to/2BhYenu

Q: 7. one antenna to receive two different signals(frequencies) by two receivers ; is it possible to use in this way?

A: Yes, the RF Venue 2X1SPLIT Passive Splitter/Combiner can be used with one antenna to receive audio signal and then route it to two different receivers. The antenna and receivers that you use will also determine the capabilities of the setup. The 2X1SPLIT functions as a router.

Q: 8. Is this cable shielded?

A: The American DJ CAT6 Pro Series EtherCON Cable (50'), would be a shielded cable.

Q: 9. Have you tested thiscable for true Cat 6 speed? It feels thin and the outer skin is a bit weak.

A: The Cmple Cat6 Bulk Ethernet/LAN Cable (1000', Black) is rated for 10 Gb/s up to 165 feet and 1 Gb/s up to 328 ft.

Q: 10. Is this a shielded cable?

A: The American DJ CAT6 Pro Series EtherCON Cable (100'), would be a shielded cable.