The IndiPRO Tools 63PPC Cable for BMPCC 16" 2.5mm to 0.7mmis designed to work with optional select IndiPRO Tools POWER POD systems or an optional power source with a 2.5mm coax connector to power your Blackmagic Design Pocket Cinema Camera. The cable is 16" long and polarity tested with the optional POWER POD systems, so you don't have to worry about crossed polarity when powering devices.

For Blackmagic Pocket Cinema Camera    16" Long    Polarity Tested    Accepts up to 19 VDC

This 16" long cable features a 2.5mm coaxial power connector on one end and a 0.7mm coax connector to power a BMPCC.

Although you can use this cable to connect optional power solutions with a 2.5mm connector to power your device, the cable has only been polarity tested with the optional IndiPro Tools POWER POD Dual & Quad LP-E6 (7.2 & 14.4 volt) battery mounting plates.

Please note that this cable is not power regulated and will pass whatever voltage through it that you connect the cable to.

The cable is rated to handle 19 volts at 5 A.

Related Questions and Answers

Q: 1. Will this work with a GH5 setup and a dummy battery for the Ninja V monitor?

A: It'll work, however, you won't be able to connect the power cord into the GH5, as it's meant for the BMPCC4K. It'll work by mounting the battery on the plate, which will, in turn, give power to the dtap port. I would recommend not buying this plate for the GH5, however.

Q: 2. Would this work with a Zacuto Gratical Eye?

A: This cable is intended for the RED Komodo camera specifically and may have a different polarity than a standard LEMO 2 pin. We would recommend a cable such as a CAMVATE D-Tap to Right Angle 2-Pin LEMO Cable CAC1983. https://www.bhphotovideo.com/c/product/1474922-REG/camvate_c1983_male_d_tap_to_right.html/qa

Q: 3. Sis this come with the dummy battery, or does it connect directly to the DC port of the Pocket 4k

A: Yes dummy battery included

Q: 4. Does this work with the BM Studio Camera?

A: No. This product works with BMP 4/6 K Pro. Please review the following item https://bhpho.to/3nWxTDy

Q: 5. Will this work with the Pocket 6K Pro?

A: Yes it should.

Q: 6. How long is this cable?

A: 3 feet or 1 meter

Q: 7. is this compatible with the Odyssey 7Q unit? Thanks.

A: Yes

Q: 8. One photo shows 2 pin power connector and another the dummy battery. Which is it? I do not want this if it is the dummy battery connector.

A: This listing comes with the dedicated 2-Pin BMPCC 4K/6K Connector.

Q: 9. will it work with the bmpcc 6k PRO?

A: Yes it will work. it is compatible.

Q: 10. Can you mount a monitor mount to the top? I am assuming so but not sure what monitor mount might work?

A: There are three threaded 1/4"-20 holes on top of the IndiPRO Tools Universal Power Grip. You will be able to mount any accessories with a 1/4"-20 screw.