The IndiPRO Tools 24" Dummy Battery Cable for Sony L-Seriesis designed to work with optional select IndiPRO Tools POWER POD systems to provide power to devices that accept Sony L-Series type batteries. The cable is 24" long and polarity tested with the optional POWER POD systems, so you don't have to worry about crossed polarity when powering devices.

For Select IndiPRO Tools Power Pods    Accepts up to 19 VDC    24" Long    Polarity Tested

This 24" long cable features a 2.5mm coaxial power connector to a Sony L-Series type dummy battery.

Although you can use this cable to connect optional power solutions with a 2.5mm connector to power your device, the cable has only been polarity tested with the optional IndiPro Tools POWER POD Dual & Quad LP-E6 (7.2 & 14.4 volt) battery mounting plates.

Please note that this cable is not power regulated and will pass whatever voltage through it that you connect the cable to.

The cable is rated to handle 19 volts at 5 A.

Related Questions and Answers

Q: 1. can this be used to power a7sii with zhiyun crane 2 power output?

A: Included in the box is a cable that can charge the Sony camera. However, you cannot charge and control at the same time according to ZhiyunTech.

Q: 2. I have an 8v output on a battery plate, but the camera is 7.2. Will this be safe?

A: This cable is compatible with 7.2 - 8V sources. It will be safe.

Q: 3. Does this work with the Sony A6500

A: Yes it should. The A6500 uses the same battery as the NP-FW50 style battery as the cameras listed, it should work as well.

Q: 4. Work on Z6ii?

A: Yes, this will work with the Nikon Z6ii.

Q: 5. Will this downconvert from standard 14.8V D-Tap on a V-mount battery, or is it intended for lower voltage power sources?

A: This cable have been regulated to output 7.4vs. If your using a standard 14.8V D-Tap the cable will down convert to to the 7.4v regulated output. Also all of our cable are regulated inline to ensure no video noise or overheating that you may get when the regulation is in the dummy battery itself.

Q: 6. I know Atomos wanted to make their own L-Series D-Tap accessory because of spikes in power draw when recording, but will this handle the Atomos Shinobi without any issues?

A: Yes our L series dummy batteries can handle the spike, our boards are rated up to 5amp

Q: 7. Hi, can I use this to power atomos shinobi from indipro v mount battery ?

A: Yes you can. The Shinobi uses Sony NP-F style batteries.

Q: 8. How to return

A: If you wish to return or exchange within 30 days of purchase from B&H, please contact our Customer Service department. Please see the following link. https://bhpho.to/2caRE5L

Q: 9. Does this work with A7siii?

A: Just to provide even more clarification due to conflicting answers: no, this will not work with the A7SIII. This model is for the A7II-generation and A6000-series cameras (except the A6600).

Q: 10. is there a way to run this with a normal quick charge power bank?

A: ive had success with both Xtpower banks off amazon. You will need a 2.5mm to 2.1mm adapter and add some copper in the center connector. The two indipro battery cables i ordered, the inner connector was deeper then the adapters and xtpower banks so it wasnt a solid connection and only worked sometimes. The copper fixed it and made it reliable. Worked great. ran the A7sII through hdmi for a live feed off a 20,000 milamp xtpower battery for 4hours and battery showed 73% left.