Pro Co Sound 3' Stereo Phone To Xlr Cable

Product Code: eq2229
Availability: In Stock

$58.50 $93.60

Qty

12 reviews Write a review

Description
Reviews (12)

This Pro Co Sound 3' Stereo Phone to XLR Cableis a 3' long patch cable that is perfect for balanced line-level patching. This cable features Pro Co's 224S Armorflex jacketed 2-conductor cable with spiral shield, with a ShowSavers T/R/S plug on one end and a Neutrik XLR female

on the other end.

Parameters
Connector 1	1x 1/4" TRS Male Straight
Connector 2	1x XLR 3-Pin Female
Cable Length	3' / 0.91 m
Connector Brand	Neutrik
Wire Gauge	23 AWG
Shielded	Yes
Color	Black
Packaging Info
Package Weight	0.3 lb
Box Dimensions (LxWxH)	6.5 x 3.5 x 0.2"

2 x 23 AWG Pro Co 223B wire in black

94% Coverage copper braid shield

Related Questions and Answers

Q: 1. What are the dimensions of the XLR box itself? Specs say 19" x 19" but that seems way too big. The picture looks more like 8" x 8" or 9" x 9". Can you verify?

A: I called and Woody at Pro Co looked it up; it's 7 x 7 x 3"

Q: 2. Hello, Is this cable compatible with the canon c100 mark II? Thank you.

A: Yes, the Pro Co XLR cable is compatible for use with a Canon C100 Mark II camera.

Q: 3. Some Ethercon cables have a stiff cable that feels like plastic and then some are soft more like a xlr cable. What kind of cable is this?

A: This cable does has have a more rigid feel to it.

Q: 4. Is this cable shielded through the shell of the ethercon?

A: Apologies but that information is not provided/published by the manufacturer. That noted, any proper termination of a cable to RJ-45 plug includes the shielding as not doing so would risk damaging the fragile-like nature of the contained copper conductor(s). Even when exposed, single copper conductors can easily break off during the crimping process.

Q: 5. Good dayCan I use this cable to connect my behringer x32?

A: Yes, you can use this cable to connect the Behringer x32.

Q: 6. Do you pseudo design these to make them balanced cables? Soldering the (-) to the ground ?? I have klark teknik dn 504 quad compressors and need at least six of these cables re-configured.

A: We cannot offer modification advice.

Q: 7. Is this compatible with the input and output connectors on AJA KiPro 12G?

A: The Pro Co DA88XF-5 can be used to connect eight XLR audio outputs from a mixer to the DB25 input on the AJA Ki Pro Ultra 12G. You would need a cable with DB25 to male XLR connectors to connect the DB25 output from the AJA Ki Pro Ultra 12G to the XLR audio inputs on a mixer, recorder or other audio input device. B&H # PRDB258XM5 is the same type of Pro Co cable with male XLR connectors.

Q: 8. Will this cable work with on the inputs of the passive Mixcube series? Seen here: https://www.bhphotovideo.com/c/product/867116-REG/Avantone_Pro_PM_Avantone_MixCubes_Full_Range_Mini.html

A: Yes, the Pro Co Sound S14BQ-6 Excellines Series Banana to 1/4" Male Phone Speaker Cable could be used to connect an amplifier's powered 1/4" output to the input connections on the Avantone Pro Avantone MixCube Full-Range Mini Reference Monitor, which accept bare wire or banana plugs.

Q: 9. Looking for a mic cable with high quality transmission plus extra strength for hanging microphone arrays. Does the kelvar reinforcement in this cable make it strong enough to suspend mics and array hardware from just the mic cables?

A: Yes, the Pro Co Sound AmeriQuad 3-Pin XLR Male to 3-Pin XLR Female Lo-Z Microphone Cable can be used with hanging microphone arrays. As with any cable that will be used to suspend a microphone, just be aware of the weight of the mic and test it beforehand to make sure that it is secure.

Q: 10. The picture says shows a 16 channel snake. Model # and description are for 24 channel snake. Is this a 24 channel snake priced at $279.95?

A: Yes, it is a 24-channel snake based on the model number and description.

YO'nas	19/09/2024
[23 AWG] I use this cable for my home studio monitors. There's nothing special about it but quality is pretty good and it serves the purpose well especially for the paid price. 5

Arnel	22/07/2024
[Yes] Fantastic , a little expensive but it's worth ,, good sound , good music . 5

Spam	06/07/2024
[0.3 lb] Perfect gear for hooking up Mackie 1602VLZ to the EQ. 5

Zman	27/06/2024
[Neutrik] I use this to split 3-Pin DMX lighting data. 5

Mike	21/06/2024
[Yes] gets used everyday and has never let me down ! 5

Jeff	17/05/2024
[Neutrik] I have been using ProCo cables for many years and in my experience they are very durable and sound great. If you want the best, get ProCo. 5

No More Talk	16/05/2024
[0.3 lb] way better than other inferior brands. very well put together. I use this with mono mics on location or in studio. 5

The Dude	15/05/2024
[Neutrik] does what it's supposed to 5

anyonymous	01/05/2024
[23 AWG] We are using them in a mixer for our drummer; they go into the direct outs in the board to the stage jacks XLR. So that our drummer can mix what he wants to hears and it does not affect the house mix. 5

anyonymous	09/04/2024
[Black] These cables are great in quality! Price is reasonable and I would but them over Monster Cable. Remember, that cables only push through signal, and the shielding keeps signal from loss and keeps other RF from coming in. At 20' you will not have signal loss unless the cable is total junk. These cables have great connection points and are high quality. Monster cable is just that - a monster who rips you off with impressive thickness and specs that mean very little. 5