Jobu Design Quick Release Clamp

Jobu Design Quick Release Clamp - Extra Small

Product Code: eq22355
Availability: In Stock

$117.00 $161.46

Qty

7 reviews Write a review

Description
Reviews (7)

The Jobu Design Extra Small Accessory Quick Release Clamp is tiny in size but big on function. Featuring a 1/4"-20 female tapped hole, this little quick release fits onto a variety of devices that don't need the bulk and weight of bigger clamps.

Parameters
Mounting	1x 1/4"-20 Female
Plate Locking Method	Screw Knob
Quick Release Plate Type	Arca-Type
Quick Disconnect System	No
Bubble Level	No
Materials	Aluminum
Dimensions	2 x 1 x 0.75" / 5 x 2.54 x 1.78 cm
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	6 x 4.5 x 0.5"

A Black Rapid, Sun-Sniper, Joby, or other sling straps with a 1/4" screw, enabling you to leave your Arca-type plates on your camera or lens

Simple ball heads without a clamp, and with a 1/4" stud on top

Directly to the top of a monopod

Monopod tilt-head

Bush-hawk shoulder mount (check fittings on your model)

Most any other device with a 1/4" stud or threaded knob

Related Questions and Answers

Q: 1. Is the Wimberley C-30 Quick Release Clamp compatable with the Induro PL-70 plate?

A: Yes the PL70 will work in the C30 clamp.

Q: 2. does this clamp comes with an adapter bushing?

A: Yes it does, a 3/8 1/4 reducer. Just be sure and do not overlook it in the bubble packaging like I did initially. It is very small.

Q: 3. How much is this clamp weight in grams?

A: 136.078 grams.

Q: 4. What is the exact spacing between the three holes?

A: Spacing between the holes is 7/8".

Q: 5. I want to put this on top of the FEISOL PB-70 Panning Base, then fasten the whole thing to a Desmond DNR-180 Nodal Rail, and use the whole thing as the upper rail for a cheap panoramic solution. Will it even work, considering thread size and overall durability?

A: Yes , if one uses the reducer bushing :https://bhpho.to/2gGw2Pp on top of the Feisol PB-70 panning base, one can mount the Desmond DAC-38 Quick Release Clamp with a 1/4"-20 inner thread below..

Q: 6. would this work with the nikkor 200-500?

A: Yes, this plate will work with the Nikon 200-500mm lens.

Q: 7. How much is this clamp weight in grams?

A: The product weighs 136 grams.

Q: 8. Does the Jobu Design QRR-138, work with the plate that bolts to camera from the Fotopro C5i tripod?

A: The Jobu Design QRR-138 uses Arca-Type quick release plates, and according to the Fotopro site their C-51 comes with/uses the Arca-type quick release plate as well. So, the quick release plate from your C-51 should work in the Jobu Design QRR-138.

Q: 9. Will this be able to use a Induro PU-50 or 60 Camera Plate?

A: Though I don't have these plates, I do have three other brands of Arca-Swiss compatible plates that work well with this clamp. That's one thing I really like about using the Arca-Swiss system, compatibility between brands is very good.

Q: 10. Is able to hold Manfrotto RC2 plate ?

A: As the RC2 is not Arca-compatible, it will not work with the FLM QLB-80 Quick Release Clamp.

Gregory	16/09/2024
[Arca-Type] Fits the base of Hasselblad 907x with CFVii50c while not interfering with removal of the digital back as larger arca swiss compatible plates do. However, it is not rubberized where it makes contact metal to metal so marring is a potential problem. I found the following on Amazon, cut a small piece to shape - perfect solution to prevent marring. Xfenvs Enhanced Cuttable Rubber Grip Tape, Ultra-Thin Strong Adhesive Non-Slip Tape for Safer Handles and Surfaces - Customizable, Waterproof, and Versatile Anti-Slip Solution (Black, 4 PCS) Brand: Xfenvs 4.6 4.6 out of 5 stars 11 ratings \| Search this page 100+ bought in past month $12.99 $12.99 5

Vlado	23/08/2024
[0.2 lb] Great for attaching any small camera to Arca clamp without adding any extra weight to the bag. Regular size plates are too awkward to use with small bodies. Two negatives - need for allen key and lack of some soft layer on the top for preventing metal to metal contact. I guess I will just use a piece of duck tape. D-ring screw head would be nice to have instead of hex. It should be standard type used on all small plates. Five stars because it is the only choice in 0.75 size out there. 5

Vlado	21/08/2024
[0.2 lb] Custom made for minimalists. This is all you need for small cameras. If you use Arca style clamps. Warning: Easy to lose. 5

craig	15/08/2024
[0.2 lb] Does the job and is tough as nails. Would buy again. 5

Steve	22/06/2024
[Arca-Type] This converts your regular pod to an arcs swiss type. I have plates on my bodies and lenses that dont easily come off, so this is a nice solution to allow easy attachment. The other option are bigger heads, but this is a simple solution. 5

Tom	14/06/2024
[6 x 4.5 x 0.5"] I have purchased many (many) arca Swiss plates, mainly for DSLR and mirrorless cameras. I have also owned several small point and shoot cameras-all with the problem that the battery door/SD card compartment built so close to the 1/4-20 mount hole, that if a tripod plate was affixed to the camera, the battery door/SD compartment was not accessible. This is the ONLY plate I have found that I can affix to the point and shoot camera and still have access to the battery door/SD compartment without removing the plate. It is small, but with plenty of area to grip the tripod mount to hold the camera steady. This makes my point and shoot camera (currently Lumix ZS-200) tripod friendly-and if you are looking for an exceptional small, packable, travel tripod, check out the Aoka carbon CMP163CL-a gem. 5