Pelco Fmci-Bf1Mm1St Ethernet-Fiber Media Converter

Pelco Fmci-bf1mm1st Ethernet-fiber Media Converter

Product Code: eq22377
Availability: In Stock

$1,260.00 $1,965.60

Qty

11 reviews Write a review

Description
Reviews (11)

The Pelco FMCI-BF1MM1ST Ethernet-Fiber Media Converterfrom Pelco FMCI-BF1MM1ST Ethernet-Fiber Media Converteris designed to receive 10/100 Mbps data over multimode optical fiber with ST optical connector. The electrical interface will auto-negotiate to a 10 Mbps or 100 Mbps Ethernet rate without any adjustments and the optical interface operates at a 100 Mbps Ethernet rate. This FMCI series media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status and monitoring critical operating parameters.

Data
Number of Channels	1
Data Interface	Ethernet
Data Rate	10/100 Mbps
Operating Mode	Electrical Port: Full duplex or half duplex Optical Port: Full duplex
Optical
Connector	ST
Number of Fibers	1
Mode	Multimode
Wavelength	1310/1550 nm
Power Budget	10 dB
Transmission Distance	2 miles (3 km)
Electrical
Power Input	8 to 24 VDC
Current Protection	Automatic resettable (solid state current limiter)
MTBF	>100,000 hours
LED Indicators	Optical link, data; electrical link, data; power
General
Connectors	Power: Terminal block TCP/IP: Port RJ-45
Number of Rack Slots	1
Certifications	CE, Class A; FCC, Class A; UL/cUL listed; C-Tick; RoHS; IEEE 802.3; designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards
Operating Temperature	-40 to 167°F (-40 to 75°C)
Storage Temperature	-40 to 185°F (-40 to 85°C)
Relative Humidity	0 to 95%, non-condensing
Dimensions	6.1 × 5.3 × 1.1" (15.5 × 13.5 × 2.8 cm)
Weight	1.0 lb (0.5 kg)
Packaging Info
Package Weight	1.1 lb
Box Dimensions (LxWxH)	10.5 x 6.1 x 3"

10/100 Mbps Ethernet (10Base-T/100Base-TX electrical port; 100Base-FX optical port)

Electrical port supports auto-negotiation for 10 Mbps or 100 Mbps, full-duplex or half-duplex data

Optical port supports 100 Mbps full-duplex data

Automatic MDI/MDI-X (medium dependent interface/medium dependent interface crossover) operation

Multimode fiber support for distances up to 2 miles

Transparent to data encoding/compatible with major data protocols

Designed to meet NEMA TS 1/TS 2, and Caltrans traffic signal control equipment environmental standards

ST optical connector

1-fiber design

Flexible option for operating AC/DC power

Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events

No performance adjustments required

LED status indicators for monitoring all critical and normal operating parameters

Standard size is hot-swappable in the card cage

Compliant with IEEE 802.3 standard

Related Questions and Answers

Q: 1. does it work with a ds control point?

A: This controller that has USB connectivity has limited control with DS ControlPoint for additional specs you will need to contact the manufacturer directly.

Q: 2. Will an ATEM switcher control tally via ethernet or do you still need to run a GPI Tally Interface for these?

A: The ATEM switcher provides tally over the SDI connection. You connect the ATEM Program out to the Studio Fiber Converter SDI input #1 and assign a camera number. The camera will get tally in this way. You may optionally wire a 3rd party tally to the DB-25 connector but that has nothing to do with the ATEM and is not necessary.

Q: 3. Will this fit the Panasonic WV-CP630 Super Dynamic 6 700 TVL box cam?

A: This camera will be able to fit into this housing. The housing internal dimension is 11 inches long, The camera 5.2 inches long without a lens. As long as the camera plus the lens is less than 11 inches the camera will fit.

Q: 4. Does this support a bidi SFP? If so which one/which brands would be compatible?

A: The StarTech Gigabit Ethernet Fiber Media Converter BH #STMCM1110MML does not support BiDi SFP.

Q: 5. Does the Talkback 4K come with the Fiber connector as pictured in your description for the Talkback 4K interface? Can I connect BMD Talkback 4K Fiber Connectors to the BMD Studio Fiber connector and have intercom at the BMD URSA Broadcaster Camera Fiber back?

A: The Talkback 4K does not include fiber SFP modules, they can be purchased separately: 3G - https://www.bhphotovideo.com/c/product/654839-REG/Blackmagic_Design_ADPT_3GBI_OPT_Adaptor_3G_BD_SFP.html 6G - https://www.bhphotovideo.com/c/product/1076394-REG/blackmagic_design_adpt_6gbi_opt_adapter_6g_bd.html 12G - https://www.bhphotovideo.com/c/product/1447935-REG/blackmagic_design_adpt_12gbi_opt_12g_bd_sfp_optical.html Yes, you can connect the Talkback 4K to the Studio Converter to get talkback on an URSA Broadcast camera with a Fiber Converter attached. You will need an ATEM switcher to pass the talkback channels through. Newer ATEM switchers have talkback built in, so you only need the Talkback 4K if you're using an older model. Consult your manual to see if your ATEM model has talkback built in.

Q: 6. Would these work with Hikvision 4k cameras in a 200 foot run of coax. And live in an outdoor encloser?

A: The Lorex Coaxial to Ethernet Converter Kit is not rated for outdoor use. However, if you protect the kit in an enclosure it would work. Also, note that Cat6a, and Cat5e cables can be run and work over 200ft. Another good option for your needs is listed below. EverFocus PALUN II Ethernet over Coaxial Converter with PoE BH #EVPALUNII

Q: 7. does this come with the rackmount kit as shown in the picture?

A: The Rack Mount kit is a separate option.

Q: 8. Can I use a bidirectional SFP on this? If so, what brand would be compatible (CISCO, Netgear, etc.)?

A: The TP-Link MC220L Gigabit SFP Media Converter BH #TPMC220L is compatible with: For MC200CM: 850nm For MC210CS: 1310nm For MC220L: depends on the used SFP module For MC200CM: 62.5/125μm multi-mode fiber (≤220m); 50/125μm multi-mode fiber (≤550m) For MC210CS: 9/125μm single-mode fiber (≤15km) For MC220L: depends on the used SFP module It should work with other brands as well.

Q: 9. Will this unit output monitor all 16 analog channels simultaneously? What is the rotary selector for? Is it for only monitoring specific channels?

A: It will monitor all channels. To see the individual channels, use the rotary.

Q: 10. Pls advise what speed Ethernet is required to transmit HD - SDI video?

A: We will need more information about what you wish to do in order that we may answer your inquiry. Please email us at provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Christopher	02/08/2024
[>100,000 hours] The Pelco VideoExpert licenses (four camera licenses on one license number in my case) activated easily and quickly, following the Pelco procedure. 5

Robert	23/07/2024
[1.0 lb (0.5 kg)] It has been doing the job for a few months now, and we have had no problems at all. 5

Ian	02/07/2024
[10.5 x 6.1 x 3"] Big fan - secure, nice price, works well. 5

Joel	16/06/2024
[8 to 24 VDC] We extended a fiber circuit to a copper patch and it worked flawlessly. 5

Pavel	09/06/2024
[1] I received a V4.6 Model in August 2021, had no issues at all setting it up, running strong for a week now, hopefully I don't need to use the 2-year warranty. 5

Andrew	06/06/2024
[1.0 lb (0.5 kg)] Don't forget to buy SFP's separately, but if you do that - this should work well for converting ethernet to fiber in either direction. Simple to use and worked, so we're happy! 5

jerry	01/06/2024
[1.0 lb (0.5 kg)] It plugged in and worked with a sc1 with no problems. 5

jamesjamws	28/05/2024
[1] Plugged in, got Ethernet. Great devices. Works like a charm. 5

Vinny L	27/05/2024
[1] I am impressed to say the least. I brought two units and they are being used well over 500 feet. I have had no issues with signal degrading. I highly recommend this unit if you need to tranfer data over a very long distance. 5