The Point Source Audio XLR-4M to XLR-4F Intercom Cableallows you to extend the length of your CM-i3 intercom headset cable. One end of the cable terminates in a 4-pin female XLR connector and the other end terminates in a 4-pin male XLR connector.

4-Pin XLR Male Connector    4-Pin XLR Female Connector

Related Questions and Answers

Q: 1. Can I use this adapter cable to connect an intercom headset with 4pin XLR to an URSA Broadcast?

A: No. The URSA Broadcast will accept XLR mic inputs for stereo input. The 3.5mm is a combo headphone/mono mic in.

Q: 2. In general, as far as quality goes, how do the Premier cables compare to Mogami?

A: The Warm Audio Premier is comparable with the Mogami Gold as an option for a high-quality audio cable for use in stage or studio applications. Both cables use high-quality quad-conductor construction and gold-plated connectors. The Warm Audio cable uses a braided shield while the Mogami Gold uses a spiral shield which are both effective designs to prevent Radio Frequency Interference (RFI) and Electro Magnetic Interference (EMI) from affecting the signal.

Q: 3. Could use this so I could use a 4 pin ClearCom headset on a smart phone? Like Unity App?

A: Yes, the Point Source Audio ADP-4MxPH PSA Headset Adapter Cable 4-Pin Male XLR to 3.5mm Male TRRS can be used to adapt a 4-Pin XLRF terminated communications headset for smartphone connection.

Q: 4. Will this work between a mixing board and an android smartphone? Using an auxiliary output from the mixer

A: No, this cable is intended for connecting a dynamic microphone with the input on a smartphone. Since you will be connecting the output from a mixer, which is a louder line level signal (not mic level), you will need to use an attenuator (level matching) cable that will pad the line level signal from the mixer and make it compatible with the mic level input on a smartphone. If you will be connecting from a mixer's XLR output, you will want to send both the left and right output signals so you will need a cable like the Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable - 18" (B&H # SES43DBMZ2XJ) combined with a USB-C adapter such as the Apple USB Type-C to 3.5mm Headphone Jack Adapter (B&H # APMU7E2AMA) to convert the 3.5mm TRS plug to USB-C. If you have other output options on the mixer, such as RCA (Tape output), you can use the Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable - 18" (B&H # SES43DBMZ2P). Please

Q: 5. Can I use a 5-pin telex RTS headset and this connector to use unity app on an ipad 3.5mm jack?

A: Yes, that is possible; this adapter is designed for use with mobile devices.

Q: 6. Will my 5-pin XLR RTS headset work on laptop (both microphone and speaker) by using this connector?

A: Yes, the Point Source Audio ADP-5FxPH PSA Headset Adapter Cable 5-Pin Female XLR to 3.5mm Male TRRS (8") can be used to adapt 5-pin XLR connection headsets for compatibility with laptops and smartphones.

Q: 7. Will this work with the rycote stereo connboxes 5 pin output?

A: Yes, this cable would work with the 5-pin XLR stereo output of the Rycote Connbox 5.

Q: 8. Will this work for Ronin 4D?

A: The Tilta 6-Pin to 4-Pin XLR Cable is made to power the ARRI ALEXA MINI.

Q: 9. With the 4/5 pin unit, the manual mentions pinouts for an A/B channel system. How does the pack let you choose B or A to speak into?

A: You can use only one headset at a time which can be either 4-pin OR 5-pin configuration. The included 3.5mm TRRS cable allows you to connect the audio from the Outerloop 3.5 to the headphone jack on a smartphone, computer, or other compatible mobile device through unit's the 3.5mm jack. You can then use your mobile device to call into your intercom phone bridge, station phone coupler, or any phone-based intercom app.

Q: 10. Used with Sony camera to connect with clear-com's 5-pin headset How are the 5-pin and 4-pole TRRS arrays configured?

A: Thank you for your question. At this time the manufacturer does not have this specification available.