The Kopul Neutrik XLR M to F Microphone Cable 25' 3-Packis a studio- and broadcast-quality 4-conductor cable precision engineered for maximum rejection of RFI and electro-magnetic interference, extremely quiet performance, high flexibility and durability. Its twisted quad-conductor design features oxygen-free copper and allows for excellent conductivity, flexibility, low capacitance, and tensile strength.

This design affords the conductors a twist pitch length of only 0.7", reducing interference by assuring the minimum amount of the conductor is parallel to interference sources at any given section. The result is increased rejection of electro-magnetic and RFI noise, even in close proximity to the source. Cotton yarn is packed in to reduce friction between conductors and prevent unwanted electrostatic build-up and microphonic noise. The 99% braided TAC shield provides additional noise protection and corrosion resistance. Its Neutrik XX gold connectors provide high-quality, corrosion-free connectivity, and each solder point is individually shrink-wrapped for additional protection and to meet network broadcast facility standards.

Premier Quad Pro 5000 Series cables are ideal for use in the most demanding studio, touring, and broadcast applications.

For Most Demanding Studio/Broadcast Use    Neutrik XX Gold Connectors    Four-Conductor Design    99% High-Density TAC Braid    24-Gauge OFC Conductors    0.7" Long Twist Pitch for RFI Rejection    Cotton Yarn Wrap Reduces Noise    Shrink-Wrapped Solder Points

Precision-engineered twisted quad-conductor design

0.7" pitch twist length for greater induced noise reduction

99% tinned copper braided shield for long-lasting protection against RFI and EMI

Ultra-low capacitance for accurate signal reproduction

Cotton yarn to reduce electrostatic and microphonic noise

Shrink-wrapped solder points for extra protection

Ideal for broadcast and audio professionals

Related Questions and Answers

Q: 1. Can you "daisy chain" these extenders by connecting two male or two female extenders via Cat 5?

A: Each Kopul 4-Channel XLR Network Cable Extender only has a single RJ45 port, so they cannot be daisy chained.

Q: 2. Is it feasible to connect a Rode VideoMic on a boom pole with this cable to a Saramonic SR-PAX2 mixer (or similar)? Or what cable(s) could I use, please?

A: Yes as long you have one of the Rode Videomic models where the cable detaches, it will work straight into the SR-PAX1 XLR input.

Q: 3. Can I use this with an audio channel from Professional Broadcast CD/Media Players to a Mixer?

A: Yes it will work with no issue.

Q: 4. Is shielding/xlr design strong enough for this to be run next to a power strip or two (hehe) and have less distortion than a standard or high quality 3.5mm cable?

A: No guarantees - but it very well may help.

Q: 5. Hello. I have a Salora Hi-Fi 6300 Micro with 2 Salora KS 430 Hi-Fi speakers, will it works fine? I mean, this speakers have a very high quality, and want to know if this will work enough or need some better

A: If the connectors are correct, they'll work. To prevent quality drop, use as short as cable as possible.

Q: 6. Is this XLR using Neutrik connectors?

A: Yes Mogami furnishes this cable with Neutrik connectors.

Q: 7. Can it also be used as an input

A: Yes, you could use the two female 1/4" plugs of the Kopul Stereo 1/4" Y Cable (B&H# KOHPSSP) to combine two stereo (or mono) sources of an audio signal and to send it to the 1/4" male plug. Such a connection should not be made above line level, however.

Q: 8. Is this compatible with Clear Com systems?

A: The Sescom XLM6-XLF6 Belden & Neutrik 6-Pin XLR Male to 6-Pin XLR Female Audio Cable will be compatible with 6-pin XLR jacks on ClearCom systems.

Q: 9. Can I use this cable to plug a Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface?

A: No, the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is not compatible for use with the Deity Microphones V-Mic D3 Pro Shotgun Microphone. The V-Mic D3 Pro requires plug-in power to function, so you will need to use an XLR adapter with a phantom power converter like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DEDXLR), which is the adapter that Deity includes with their location recording bundle for connection to an XLR input, and connect to a device that will supply phantom power. The D-XLR adapter will allow you to use the original 3.5mm TRRS smart cable that comes included with the microphone to convert the plug and enable compatibility for connection to the XLR input on the Focusrite Scarlett Solo USB Audio Interface. You will need to have the phantom power (48V) switch for the XLR input on the interface turned on in order to supply power the mic. If you need a longer cable, simply attach a standard XLR to XLR cable between the XLR input on the interface and the XLR output on the Deity D-XLR adapter. For example, you can use the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - 10' (B&H # KOM3010) or similar cable in any length you prefer for your extension.

Q: 10. Will this enable me to use two headphones from my TV at the same time?

A: Yes. Splits stereo signal to 2 outputs.