The 1/4" TRS to XLR3M Balanced Audio Adapter Cablefrom 1/4" TRS to XLR3M Balanced Audio Adapter Cablefeatures a standard 3-pin XLR male connector on one end and a 1/4" TRS male connector on the other end, which connects to a mixer or any audio output device. It is built with Neutrik connectors and Canare brand cable. The cable length is 18".

For Audio Mixers and Recorders    18" Length    Neutrik Connectors    Canare Brand Cable

Related Questions and Answers

Q: 1. how long is it?

A: The manufacturer has not published the length of the SmallRig 3.5mm TRS to USB-C Audio Cable.

Q: 2. Does this cable record audio via analog record-out from the Analogue Audio Mixer?

A: The Saramonic SR-C2000 3.5mm TRS Male to Lightning Adapter Cable for Audio to iPhone can be used to send mic level audio signal from a microphone or wireless microphone receiver to the iPhone, but the output signal from a mixer is line level, so you will need to use an attenuator to pad the signal and bring it down to mic level. You can combine the SR-C2000 with an attenuating cable like the Sescom 3.5 mm Line to Mic -25 dB Audio Cable for Zoom H6 (B&H # SELN2MICZMH6) or the Kopul ACH4-25MON Line-to-Mic Attenuator Cable (B&H # KOACH425MON).

Q: 3. Does it fit AKG K240 headphones?

A: Yes, the Remote Audio 1/8" Female to 1/4" Male TRS Screw-on Adapter is compatible for use with the AKG K240 Studio Professional Stereo Headphones.

Q: 4. Is this a bi-directional cable that allows you to send audio signals in either direction (like the Apple cable)?

A: No, the Saramonic SR-C2000 3.5mm TRS Male to Lightning Adapter Cable for Audio to iPhone (9") is not a bi-directional cable.

Q: 5. Does this cable match the ZAXCOM pin out?

A: The pin-out configuration is not published.

Q: 6. I'm getting a buzz with this cable connected directly from a microphone to an amp-- anyone else?

A: That is a balanced connector cable for LINE level signals, if you are using that cable to connect a microphone, it is not the correct cable. https://www.bhphotovideo.com/c/product/828155-REG/Hosa_Technology_HMIC_010HZ_HMIC_010HZ_Pro_Mic_Cable.html This is the correct cable for microphones.

Q: 7. Does this work for recording line-in to a zoom h4n recorder?

A: Yes it should,

Q: 8. Since this is passive, it's bidirectional, right? So I can take the signal from XLR line level to an 1/8" video capture input.

A: The Sescom AUD-TRS-BAL 3.5mm Stereo Unbalanced Audio to Dual XLR Balanced Converter Cable has male connectors on the XLR ends (which are used for connection to XLR inputs) and converts an unbalanced 1/8" (3.5mm) stereo output signal to a balanced XLR input signal, so it would not work. As an option for connecting dual XLR line output to an 1/8" (3.5mm) line input, you can use a standard Y-cable like the Hosa Technology Stereo Mini Angled Male to Two 3-Pin XLR Female Y-Cable - 1' (B&H # HOYCSMMR2XF1). If the 1/8" (3.5mm) input is a mic-level input, you can use a level-matching cable like the Sescom Attenuating Line to Mic Level Cable - TRS Male to Female XLR, 18" (B&H # SES43DBMZ2XJ), which will convert the line-level signal to mic level.

Q: 9. Hello all, i need 18 of cable THEN the connectors length on top of that so total length would be 18 (cable) plus length of connectors? SO since the specs do not have a drawing i must spew a question - thank you -Rollo (canare wire neutrik XLR female to TRS gold

A: The total length is 18 - end to end.

Q: 10. Would this connect the Sennheiser XSW-D Mini Jack wireless receiver (apparently TRS female unbalanced) to an XLR-female port (on my Zoom F6 recorder), please?

A: Yes this will allow you to connect your XSW-D to a Zoom F6