The Remote Audio Adapter Cable TA3F to 3.5mm RA TS 18"from Remote Audio Adapter Cable TA3F to 3.5mm RA TS 18"features a TA3F connector on one end and a 3.5mm RA TS jack on the other, and sums the stereo output to a mono signal. It can be used to connect a mixer/recorder stereo output to camcorders, DSLRs or any other device with a 3.5mm stereo input jack. The cable is built with professional-quality Neutrik, Remote Audio, and Canare brand components. In addition, the cable length is 18".

For Tape /Mix Outputs    18" Length    Neutrik and Remote Audio Connectors    Canare Cable

Related Questions and Answers

Q: 1. Will this connector work to connect a Countryman Lavalier mic that has a 3 pin XLR connector to connect it to a Sennheiser G2 or G3 wireless lav transmitter?

A: This would not work with a Countryman wired xlr since that specific mic would need 48v phantom power to run, which the Sennheiser transmitter will not provide. It would be recommended to purchase a Countryman mic wired for Sennheiser instead: BH #COB3W4BSR.

Q: 2. Hello all, i need 18 of cable THEN the connectors length on top of that so total length would be 18 (cable) plus length of connectors? SO since the specs do not have a drawing i must spew a question - thank you -Rollo (canare wire neutrik XLR female to TRS gold

A: The total length is 18 - end to end.

Q: 3. What does the 40 dB Pad option mean?

A: The built-in pad on the Remote Audio Unbalanced Adapter Cable 3.5mm RA TS Jack to 3-Pin XLR Male with 40 dB Pad reduces the level of the output signal from the device it is connected to by 40 dB. This is often used when connecting a device with line level output signal to a microphone input on a camera or recorder.

Q: 4. will this cable work for inputing IFB using Lectrosonics LT transmitter from LiveU 600 ?

A: If your device has an 1/8'' audio output then yes, you can go from that into your Lectrosonics transmitters using the Remote Audio CALEC1/8T5FS cable.

Q: 5. Does this cable match the ZAXCOM pin out?

A: The pin-out configuration is not published.

Q: 6. Can this be used to connect the Sennheiser G3 receiver to the Canon C70?

A: No, this Remote Audio cable has a female mini-XLR connector and you need a male mini-XLR connector for the camera's audio inputs. You can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K - Blue (B&H # KOMINIPLSBL) or the same cable in Black (B&H # KOMINIPLSBK) or the Cable Techniques Locking 3.5mm TRS to TA3M Cable for Sennheiser EK 100 G4/G3 to Canon EOS C70 (B&H # CACTMNG4C715) which has angled connectors.

Q: 7. Is it good to connect sennheiser G4 RX to Sound Devices 633 Line input?

A: Yes it is.

Q: 8. Is this cable ideal for connecting a mirrorless camera such as a GH4 -- with its dedicated mic input -- to a recorder such as the Tascam DR-60dmkII -- with its dedicated camera outputs -- or will any standard 3.5mm stereo mini cable do? I want to achieve the cleanest possible signal between camera and recorder. Any advice or recommendation is appreciated.

A: The Tascam DR-60dmkII features a dedicated camera mic level output. Any standard 3.5mm cable will suffice to get clean audio from the recorder to the camera.

Q: 9. i was wondering if this is the cable that will let me sync my Sound Devices 633 to Red epic/Scarlet Cameras?

A: Yep! It's what we use for the exact same purpose. We bought a knock-off one first, and that didn't work. This is great.

Q: 10. Does this work with Tentacle Sync TRACK E ( BH #TETRACKE )?

A: It is recommended to use Locking 3.5mm TRS cables with the Tentacle TRACK E.